www.milfordpower.com
Search
Categories
Accessories
Air Filters
ATV Parts & Accessories
Bearings, Bushings & Repair Kits
Belts
Blades
Carburetion
Chainsaw Parts
Controls, Throttles & Cables
Deck Rebuild Kits
Drive Parts
Efco Power Equipment
Electric PTO Clutches
Engines
Engine Maintenance Kits
Fuel Related Parts
Generac Generators
Grass Catchers
Hydro Gear Hydro Pumps
Ignition Parts
Illustrated Parts Lists
Internal Engine Parts
Karcher Pressure Washer Parts
Lights
Miscellaneous Parts
Mini Bike & Go-Kart Parts
Mufflers & Accessories
Oil Filters
Oil Plugs & Accessories
Parts by Manufacturer
PowerSharp
Pulleys
Roller Chain & Roller Chain Accessories
Seats
Service Manuals
Shop Assortment Kits
Small Engines Tools
Snowblower Parts
Spark Plugs
Spindle Assemblies, Shafts & Pulleys
Starters & Starter Parts
Steering Parts
Tiller Parts
Tires & Tubes
Trailer Parts
Trimmer Accessories
Used Equipment
Used Parts
Wheel & Deck Parts
Service
SERVICE RATES
SCHEDULE A SERVICE
GET DIRECTIONS TO mpe
Links
(Your shopping cart is empty)
You are here:
Home
>
Parts by Manufacturer
>
Ariens Replacement Parts
Choose a sub category:
Belts
Blades
Fuel Filters
Drive parts
Electric PTO Clutches
Ignition Parts
Oil, Transmission & Hydro Filters
Pulleys
Seats
Snowblower Parts
Spindle Assemblies
Tiller Parts
Wheel & Deck Parts
Sort By:
Price: Low to High
Price: High to Low
Most Popular
Title
Manufacturer
Newest
Oldest
Availability
100 per page
200 per page
400 per page
Page
of 2
At172-105 Snowblower Carriage Bolt fits Ariens 62026 & MTD 710-0260
Our Price:
$1.00
Replaces (OEM): ARIENS 62026 & MTD 710-0260
Fits Ariens ST420, ST520 20" Snowblowers, ST524, ST624, ST724, ST824, ST832, ST1032, ST8 24" & 32" Snowblowers and 24 & 32" Snowblower Attachments.
Fits MTD 22", 24", 26", 28", 45" Snowblowers and 36" Snowblower Attachments
Length: 3/4"
OD: 5/16"
R8783 Ariens 55213/55216 Snowblower Flange Bushing also fits Gravely, Jacobsen, John Deere & Noma
List Price: $2.92
Our Price:
$1.99
You save $0.93!
Replaces (OEM): ARIENS 05521600
GRAVELY 05521600
JACOBSEN 53836
JOHN DEERE M127093
NOMA 53836
Fits Models: ARIENS 36" and 40" snowthrowers, newer snowblower models ST-524 & ST-724, Sierra, High Sierraseries and YT tractors
GRAVELY 815006-000101, 834034-000101, 836011-000101,834035-000101, 987103 (GLT584H) and 987107 (GLT584H)
Specs: ID:3/4"
OD: 1 3/16"
Height: 21/32
OIL IMPREGNATED, IRON. HEX-SHAPED OD
S225-763 Flange Bushing Fits Ariens 05521600
List Price: $3.00
Our Price:
$2.50
You save $0.50!
Replaces (OEM): ARIENS 05521600, GRAVELY 05521600, JACOBSEN 53836, JOHN DEERE M127093, NOMA 53836
Fits Models: ARIENS 36" and 40" snowthrowers, Sierra, High Sierra series and YT tractors, GRAVELY 815006-000101, 834034-000101, 836011-000101,834035-000101, 987103 (GLT584H) and 987107 (GLT584H)
ID: 3/4"
OD: 1 3/16"
Height: 21/32"
S430-492 Push/Pull Key for ARIENS ST524, ST724, ST824, ST1024, ST1028, ST1128,ST1332 and ST1336 snowthrowers
List Price: $4.50
Our Price:
$2.99
You save $1.51!
Replaces (OEM): ARIENS 07532000
MTD 725-1660
MTD OEM-425-1660
MTD TC-35062
TECUMSEH 35062
Fits Models: ARIENS ST524, ST724, ST824, ST1024, ST1028, ST1128,ST1332 and ST1336 snowthrowers
MTD 314-180-000, 314-180-088, TMO-3525203, 314-180-131, 314-181-000 snow throwers with Tecumseh engines
Push/pull key
R8796 Ariens 05503000, 55030 Snowblower Axle/Flange Bushing
List Price: $4.90
Our Price:
$2.99
You save $1.91!
Replaces (OEM): ARIENS 05503000, 55030
Fits Models: ARIENS 824, 24" and 32" snowthrower attachments drive train, 910 and 924 non-differential
FLANGE OD: 1-1/4" - (31.75mm)
HEIGHT: 5/8"
ID: 7/8"
OD: 1"
8682 - Economy 3/8" Ball Joint
List Price: $4.47
Our Price:
$3.85
You save $0.62!
3/8" - 24 FEMALE RIGHT HAND THREAD BALL JOINT FITS GO-KARTS & WAGONS.
THREAD SIZE: 3/8" - 24 FEMALE RIGHT HAND
Replaces:
ARIENS 36531
MANCO 1414
MURRAY 680070
PRIME LINE 7-06077
SUNBELT B1SB8682
R8445 Ariens 05503900/ John Deere M127082 Snowblower Axle Bushing
List Price: $5.45
Our Price:
$3.95
You save $1.50!
Replaces (OEM): ARIENS 05503900
JOHN DEERE M127082
Fits Models: ARIENS 832 and 1032, 20", 24" and 32" snowthrower attachments scoops
JOHN DEERE 524D, 724D (PC2569) and 826D (PC2570) walk behind snowthrowers
Specs: ID: 3/4"
OD: 1"
Height: 5/8
R8446 Ariens 05503500/ John Deere M124417 Snowblower Auger Bushing
List Price: $5.45
Our Price:
$3.95
You save $1.50!
Replaces (OEM): ARIENS 05503500
JOHN DEERE M124417
Fits Models: ARIENS 824
JOHN DEERE 828D, 924DE, 1032D, 1128DDE, 1128DE and 1332DDE walk behind snowthrowers
Specs: REF. NO.:62042RSNR
ID:1"
OD:1 1/8"
Height:5/8"
S225-839 Bushing Fits Ariens 05503500
List Price: $5.09
Our Price:
$4.15
You save $0.94!
Replaces (OEM): ARIENS 05503500, JOHN DEERE M124417
Fits Models: ARIENS 824, JOHN DEERE 828D, 924DE, 1032D,
1128DDE, 1128DE and 1332DDE walk behind snowblowers
ID: 1
OD: 1 1/8
Height: 5/8
S225-482 Ariens 05511200 Snowblower & Tiller Bushing
List Price: $5.18
Our Price:
$4.99
You save $0.19!
Replaces (OEM): ARIENS 05511200
Fits Models: ARIENS 901011 20" rear tine tillers, 832003 20" and 24" snow attachments
Specs: ID:3/4"
OD:1"
Height:3/4"
U.S. Made
R442 MTD 741-0919 & 941-0919 Spindle Bearing for Models 491, 831, 832 & 930 series snowthrowers
List Price: $10.95
Our Price:
$4.99
You save $5.96!
Replaces (OEM): ARIENS 54123
AYP/ROPER/SEARS 129895
BEARING 6204DU
BOLENS 172-8225
HUSQVARNA 532 12 98-95 & 738220419
JOHN DEERE JD7677R
MASSEY FERGUSON 1568
MTD 741-0919 & 941-0919
SIMPLICITY/ALLIS CHALMERS 118011, 1652231, 1652231SM, 2118011 & 2118011SM
SNAPPER/KEES 1-2828
TORO/WHEEL HORSE 251-297 & 251-318
Fits Models: AYP 917.270722, located on mower deck bottom of spindle
MTD 491, 831, 832 and 930 series snowthrowers
SNAPPER 60370 and 80499, 54" cut decks
HEIGHT: 9/16"
ID: 25/32"
OD: 1-27/32"
Honda code 3175999
Fits our R8479 Spindle Shaft w/Hardware
Fits our R7155 MTD Spindle Assembly
Fits our R7156 MTD Spindle Assembly
Fits our R8479 MTD Spindle Assembly
Fits our R9288 MTD Spindle Assembly
Fits our R8967 MTD Short Spindle Assembly
Fits our R8468 MTD Long Spindle Assembly
R5016 Snowblower V-Belt fits Ariens 72098
List Price: $7.65
Our Price:
$5.50
You save $2.15!
Replaces (OEM): ARIENS 72098
Fits Ariens Snowblower Models 924024, 924026, 924027, 924028, 924029, 924032, 924034, 924036, 924038, 924039, 924040, 924042, 924044, 924046, 924048, 924050, 924054, 924046, 924048, 924046, 924048, 924050, 924071, 924073, 924074, 924075, 924076, 924077, 924079, 924081, 924082, 924083, 924084, 924085, 924086
Width: 3/8" (9.53mm)
Length: 33" (838.2mm)
R5017 Snowblower V-Belt fits Ariens 72066
List Price: $7.65
Our Price:
$5.50
You save $2.15!
Replaces (OEM): ARIENS 72066, AYP/ROPER/SEARS 302707, SIMPLICITY 118494 (5 & 8hp)
Fits Ariens Snowblower Models 924020, 924022, 924024, 924024, 924026, 924028, 924029, 924032, 924034, 924027, 924036, 924038, 924039, 924040, 924042, 924044, 924046, 924048, 924050, 924054, 924051, 924052, 924071, 924072, 924073, 924074, 924075, 924076, 924077, 924080, 924082, 924084, 924085, 924086, 924087, 924091, 924092, 924093, 924100, 924101, 924102, 924103, 924104, 924105, 924106, 924107, 924312, 924313, 924317, 924318, 924318, 924319, 924320, 924321, 924322, 924323, 924324, 924325, 924326
Width: 3/8" (9.53mm)
Length: 34" (863.6mm)
R5020 Snowblower V-Belt fits Ariens 72106
List Price: $7.65
Our Price:
$5.50
You save $2.15!
Replaces (OEM): ARIENS 72106
Fits Ariens Snowblower Models 932001, 932004, 932006, 932026, 932027, 932045, 932046, 932047, 932048, 932311, 932312, 932040, 932041, 932042, 932140, 932141, 932509, 932510, 932037, 932038, 932036, 932037, 932504, 932505, 932037, 932038, 932039, 932505, 932507, 932508, 932026, 932027, 932029, 932031, 932032, 932302, 932303, 932304, 932305, 932306
Fits Ariens Tiller Models 901015, 901011, 901012, 901400, 901016, 901017, 901018, 901019, 901418
Width: 3/8" (9.53mm)
Length: 37" (939.8mm)
R1277 Briggs & Stratton 392989, 299477, 393232, (8-16 hp) Muffler
List Price: $10.67
Our Price:
$5.50
You save $5.17!
R1277 Briggs & Stratton 392989, 299477, 393232, (8-16 hp) Muffler
Replaces Briggs & Stratton 392989, 299477, 393232, (8-16 hp). Tecumseh 32043B and Kohler No. 275679/275679-S.
FITS BRIGGS & STRATTON. ALSO FITS WISCONSIN & GRAVELY 008227/21457900/21375300. FITS JOHN DEERE AET10410, ARIENS 20033200, WHEEL HORSE & POWER KING.
Fits Kohler models: M10 through M20, K241 through K321, K532 through K582 and CH11-18.
ID: 1-1/4"
PIPE SIZE: 1"
THREAD SIZE: 1"
R5134 Ariens 01016500/02459951/02483851/02483859 Double Sided, Reversible Snowblower Skid
List Price: $8.24
Our Price:
$5.60
You save $2.64!
Replaces (OEM): ARIENS 01016500, 02459951, 02483851, 02483859
JOHN DEERE M124413, M144012
MTD 05002, 05002-0637
Fits Models:
ARIENS ST824, ST1024, ST1028, SST1332. ST1128 and ST1336
JOHN DEERE 524D, 724D, 826D, 828, 924DE, 1032, 1128DDE and 1332DDE walk behind snowblowers
MTD 190-486-000, 19486C, 196-486-000, 310345, 311345, 31340-7, 8, C, 31345-9, 31350C
Also Fits Bolens and Simplicity
Length: 5 3/4"
Width: 3 5/8"
Height: 1 1/16"
7/16" W x 1 3/14" slot
Slots are 3" apart
Bolt slots are 3" center to center
S230-060 Spindle Bearing for Snowblowers, Chainsaws & more.
List Price: $7.00
Our Price:
$5.99
You save $1.01!
Replaces (OEM): ARIENS 05418800
AYP 110485
AYP 110485X
CUSHMAN 832498
DOLMAR 960 102 176
GILSON 236544
GREENFIELD GTO396
HUSQVARNA 532 11 04-85
JOHN DEERE JD8535
KING-O-LAWN 7192
LAWN-BOY 700479
LAWN-BOY 703275
MAKITA 960 102 176
MTD 741-0124
MTD 941-0124
NOMA 49562
SIMPLICITY 1666292
SIMPLICITY 1705897
SNAPPER 1-3020
SNAPPER 7013020
TORO 38-7820
TROY BILT 1120502
TROY BILT 1185064
TROY BILT 941-0124
UNIVERSAL 6203-2RS
VICTA ME63217A
WACKER 0125686
Fits Models: ARIENS 93700 series snowthrowers
AYP 93700 series snowthrowers
DOLMAR PC-64XX, PC-73XX AND PC-81XX MODEL CUTOFF SAWS
JOHN DEERE LX172, LX173, LX176, LX178, LX186, LX188, GT242, GT262, GT275, Z TRAK
MAKITA DPC64XX, DPC73XX AND DPC81XX MODEL CUTOFF SAWS
MTD 074, 084, 114 and 314 series; spindle bearing
SEARS 917.270722; spindle bearing
TORO S-200, S-620 and CCR2000 snowthrowers
WACKER BTS930, BTS935, BTS1030 AND BTS1035 MODEL CUTOFF SAWS
REF. NO.: 6203-2RS
ID: 0.669"
OD: 1.575"
Height: 0.475"
S230-003 MTD 741-0155/941-0155 Spindle Bearing for 020, 030, 406, 430, 700, 719, 730, 740, 756 & 766 series
List Price: $9.12
Our Price:
$5.99
You save $3.13!
Replaces (OEM): ARIENS 05403900
ARIENS 05435100
BUNTON PL4969
CUSHMAN 812899
DIXIE CHOPPER 67205
HOFFCO 204906S
MCLANE 2036
MTD 741-0155
MTD 941-0155
SCAG 48224
SIMPLICITY 1665521
TROY BILT 1185169
TROY BILT 941-0155
UNIVERSAL 99502H
WALKER 5037-1
YAZOO 204-020
Fits Models: ARIENS 24" and 32" snowthrower attachments drive train
CUSHMAN Truckster
MTD 020, 030, 406, 430, 700, 719, 730, 740, 756 and 766 series
MURRAY Lawn edgers
SCAG Turf Tiger
YAZOO YR60 and YR76
REF. NO.: 99502H
ID: 0.628"
OD: 1.373"
Height: 0.431"
R484 - Spindle Bearing 3/4" X 1.781
List Price: $8.40
Our Price:
$6.01
You save $2.39!
Replaces;ALLIS CHALMERS 536986, ARIENS 05412000, ARIENS 54073, ARIENS 54120, BOLENS 118-5828, CUB CADET 465003-R91, DIXON 6011, GRAVELY 11641, HOGG 11109,GRAVELY 35925, JOHN DEERE 9266, JOHN DEERE 9296,MASSEY FERGUSON 833-411-M1, MASSEY FERGUSON 83341M1, OREGON 45-295, PRIME LINE 7-04250,SIMPLICITY/ALLIS CHA 108202, SIMPLICITY/ALLIS CHA 2108202,
SIMPLICITY/ALLIS CHA 2108202SM, SIMPLICITY/ALLIS CHA 536986, SNAPPER/KEES 1-0696, SNAPPER/KEES 1-3313,
SNAPPER/KEES 7013313, SNAPPER/KEES 7013313, STENS 230-033, STENS 230-037, SUNBELT B1SB484,
TORO/WHEEL HORSE 10-9842 & YAZOO 204-060.
Used on our R7154 Shaft. Bearing No. 9504-ZZ.
Size: ID 3/4", OD 1-25/32", Height 19/32"
S215-210 - WHEEL BEARING
List Price: $9.55
Our Price:
$6.55
You save $3.00!
Replaces (OEM): ARIENS 05408900, 05416200
BUNTON P0209, PL0941
CASE C12110
CUB CADET 384881-R93, 384881-R94, IH384891-R94
GRAVELY 011193, 036778, 037823, 05408900
JOHN DEERE AM118315, AM127304,AM35443
MTD 741-0141,941-0141, IH-384881-R94
SNAPPER 7028722
TORO 110513, 251-210
Fits Models: ARIENS Most 21" walk behind mowers
BUNTON 410-350-5 caster wheels
JOHN DEERE 100 and LX series, 410-350-5 caster wheels
ID:.750"
OD:1.380"
Height:.495"
With open back race for grease penetration
R9660 - Plunger Interlock Switch for many applications
List Price: $9.95
Our Price:
$6.68
You save $3.27!
Replaces OEM#: ARIENS 02754100, 03657100, 27541, 36571
AYP/ROPER/SEARS 104445X
BOBCAT/RANSOM 38382
BOLENS 174-8723
BUNTON-GOODALL PL4518
EXMARK 513051
FERRIS 21451
GARDEN WAY 1748723
HOWARD 09-058
HUSTLER 781211
JOHN DEERE AM-103119, AM-104884
KUBOTA K2561-62251
MTD 725-1657A, 725-1657A, 725-3167
MURRAY 24273
SCAG 481637
SNAPPER/KEES 14847 , 15707, 7014847, 7015707, 919098
TORO/WHEEL HORSE 65-7410, 1748723
YAZOO 1923-025, 539001125
R5567 - 19-3/4" Ariens 22107 Snowblower Scraper Bar
List Price: $13.20
Our Price:
$6.75
You save $6.45!
Replaces (OEM): ARIENS 22107.
Fits all Ariens 20" augers.
Length: 19-3/4"
Width: 1-3/4"
Five 5/16" square mounting holes.
Mounting Holes approx 4.5" apart center to center.
Steel construction, painted orange
At172-100 Ariens 24599 Snowblower Shoe
List Price: $8.24
Our Price:
$6.95
You save $1.29!
Replaces (OEM):ARIENS 2459900, 02483859, 24599, 02459900
Fits ALL ARIENS 1960 UNTIL PRESENT. FITS ARIENS MODELS: 924080 & 924082 WITH 24" AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & SIMPLICITY
Length: 5 13/16"
Width: 3"
Height: 1"
Slot: 7/16" W x 1 3/14"
Bolt slot: 3" center to center
R6916 - 5" X 2.75" Deck Wheel, 2-1/2" Offset Hub, 1/2" Center Hole
List Price: $9.06
Our Price:
$6.99
You save $2.07!
Replaces OEM#: ARIENS 03471700, 34717, 3471700
AYP/ROPER/SEARS 133957, 174873
CUB CADET 734-3058B
HUSTLER 031997
HUSQVARNA 532 13 39-57
JOHN DEERE AM-116299, M84690
MTD 734-3058, 734-3058B, 934-3058, 734-04039, 753-04856A
MURRAY 092265, 092683, 92265, 92683
SIMPLICITY/ALLIS CHALMERS 1700184, 1700184SM
SNAPPER/KEES 29264
TORO/WHEEL HORSE 112-0677
Fits Models: ARIENS 42" EZR 1542, EZR 1742, EZR 1842, 48" EZR 2048 and Zoom 1640
CUB CADET 38", 40" and 50" cut
EXCEL 38", 40" and 50" cut
JOHN DEERE 38", 40" and 50" cut
MTD 46" cut deck H
MURRAY 38", 40" and 50" cut, 2000 and older
SIMPLICITY 38", 40" and 50" cut
TORO 13AP60RP744 and 14AP90RP744
BORE: 1/2"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"
R9658 Plunger Interlock Switch for Ariens, AYP, Exmark, John Deere, Ferris, Bobcat & Snapper
List Price: $7.62
Our Price:
$6.99
You save $0.63!
Plunger interlock switch Replaces ARIENS 30957, AYP/ROPER/SEARS 104445X, AYP/ROPER/SEARS 109869X, BLACK ROCK 119-3501, BOBCAT/RANSOM 38383,
COMMERCIAL TURF PROD 18324, EXMARK 513152, FERRIS 21769, GREAT DANE D38085, JOHN DEERE AM-108483, OREGON 33-027,
SIMPLICITY/ALLIS CHA 1708207, SIMPLICITY/ALLIS CHA 1708207SM, SNAPPER/KEES 27225, SNAPPER/KEES 7027225, SNAPPER/KEES 923408 &
STENS 430-409.
Single pole, snap in mounting. Normally closed.
R9663 Plunger Interlock Switch for Ariens, Great Dane, John Deere, MTD, Murray, Scag, Snapper & Toro
Our Price:
$6.99
Plunger interlock switch replaces Ariens 27541, Great Dane D38001, John Deere AM103119, MTD 725-3167, Murray 57211, Scag 481638, Snapper 15707, Toro 82-2190.
Single post, right angle snap mounted. Normally open.
S230-003 Spindle Bearing for Ariens Snowblowers. Also fits Scag, Dixie Chopper, Bunton, Simplicity, Troy-Bilt, Walker & Yazoo
List Price: $9.12
Our Price:
$6.99
You save $2.13!
Replaces (OEM): ARIENS 05403900
ARIENS 05435100
BUNTON PL4969
CUSHMAN 812899
DIXIE CHOPPER 67205
HOFFCO 204906S
MCLANE 2036
MTD 741-0155
MTD 941-0155
SCAG 48224
SIMPLICITY 1665521
TROY BILT 1185169
TROY BILT 941-0155
UNIVERSAL 99502H
WALKER 5037-1
YAZOO 204-020
Fits Models: ARIENS 24" and 32" snowthrower attachments drive train
CUSHMAN Truckster
MTD 020, 030, 406, 430, 700, 719, 730, 740, 756 and 766 series
MURRAY Lawn edgers
SCAG Turf Tiger
YAZOO YR60 and YR76
REF. NO.: 99502H
ID: 0.628"
OD: 1.373"
Height: 0.431"
S120-523 Oil Filter fits Ariens, Cub Cadet, Ferris, Gravely, Hustler, John Deere, Kohler, Lesco, Toro and Woods
List Price: $9.87
Our Price:
$6.99
You save $2.88!
Replaces (OEM): ARIENS 08200204
CUB CADET CC-12-050-08
FERRIS 5021144X1
GRAVELY 21397200
HUSTLER 747303
JOHN DEERE AM125424
JOHN DEERE KH1205008
KOHLER 12 050 01
KOHLER 12 050 01-S
KOHLER 12 050 08
LESCO 032009
TORO 12 050 01-S
TORO 98020
WOODS 70820
Fits Models:
CUB CADET 1500 and 2000 series lawn tractors with Kohler engines
GRAVELY With Kohler engines
JOHN DEERE Lawn tractors SST15, L100 and LX173 with Kohler engines
KOHLER CH18-CH25 and CV18-CV25
WOODS With Kohler engines
Specs: OD:3"
Height:2 3/4"
Micron:32
Thread Size:3/4" -16
8-11 PSI pressure relief
Anti-drain
Available in our 120-513 Oil Filter Shop Pack (12)
Original Kawasaki equivalent 055-105 Oil Filter
Available in our 120-612 Oil Filter - Profit Builder
U.S. Made
R911 Ariens 527011 Complete Air Lift Kit
List Price: $13.64
Our Price:
$7.60
You save $6.04!
Replaces OEM #: 527011
Complete Kit.
Used on our
R1096, R3323, R3324 & R2137
blades
Includes (4) 5/16"-24 x 3/4" hex screws, (4) 5/16"-24 top lock nut
R9622 Universal Ignition Switch for Ariens, AYP, Exmark, General Power, Grasshopper, Great Dane, Homelite JA, Cub Cadet, Lawn Boy, Murray, Noma, Troy Bilt, Ferris, Scag, Simplicity & Snapper
List Price: $10.95
Our Price:
$7.75
You save $3.20!
Replaces OEM #: Ariens 02456500, AYP 135944, Exmark, General Power, Grasshopper, Great Dane, Homelite JA 13064-1, Cub Cadet 725-3232, Lawn Boy 740015, Murray 56419, Noma 49907, Troy Bilt & Ferris Scag 48609, Simplicity 16648041, Snapper 7817.
Multi-application ignition switch fits single stage Simplicity & Snapper snowthrowers.
Includes key, lockwasher nut & cover.
2 Momentary switch terminals/ 2 positions.
S215-111 Bearing Race
List Price: $8.55
Our Price:
$7.75
You save $0.80!
Replaces (OEM): ARIENS 05407000
CUSHMAN 814474
DIXIE CHOPPER 10206
EZ-GO 51141-81
GILSON 1046
JOHN DEERE JD8253
LAWN-BOY 254-72
LAWN-BOY 703809
SCAG 48005-04
SCAG 481895
TAYLOR-DUNN 80-103-00
TORO 254-72
UNIVERSAL L44610
WOODS 003585
Fits Models: JOHN DEERE 303, 305 and 1500
SCAG New style spindles
TAYLOR-DUNN New style spindles
TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D
REF. NO.: L44610
OD: 1.980"
Height: 0.420"
Fits our S215-103 Roller Bearing
R8610 Ariens 129359 Left Hand Tiller Tine for RT5016B, RT5018B, RT4018T, RT6018T, RT4016T, RT6016T
List Price: $11.24
Our Price:
$7.85
You save $3.39!
Replaces (OEM): ARIENS 129359
AYP/ROPER/SEARS 449J, 6554J
TROY BILT 1270-1A
Fits ARIENS Models:
· 901021-000101 RT5016B, 5hp B&S, 18" Tiller
· 901021-001100 RT5018B, 5hp B&S, 18" Tiller
· 901022-000101 RT4018T, 4hp Tec., 18" Tiller
· 901023-000101 RT6018T, 6hp Tec., 18" Tiller
· 901401-000101 RT4016T, 4hp Tec., 16" Tiller
· 901402-000101 RT6016T, 6hp Tec., 16" Tiller
and TROY BILT Horse and Pony models
Fits left hand
Three 3/8" diameter mounting holes
2-5/8" OR 3-1/8" center to center
12" bolo tine
R8611 Ariens 129259 Right Hand Tiller Tine for RT5016B, RT5018B, RT4018T, RT6018T, RT4016T, RT6016T
List Price: $11.24
Our Price:
$7.85
You save $3.39!
Replaces (OEM): ARIENS 12959
AYP/ROPER/SEARS 4460J, 6555J
TROY BILT 1270-2A
Fits ARIENS Models:
· 901021-000101 RT5016B, 5hp B&S, 18" Tiller
· 901021-001100 RT5018B, 5hp B&S, 18" Tiller
· 901022-000101 RT4018T, 4hp Tec., 18" Tiller
· 901023-000101 RT6018T, 6hp Tec., 18" Tiller
· 901401-000101 RT4016T, 4hp Tec., 16" Tiller
· 901402-000101 RT6016T, 6hp Tec., 16" Tiller
and TROY BILT Horse and Pony models
Fits right hand
Three 3/8" diameter mounting holes
2-5/8" OR 3-1/8" center to center
12" bolo tine
R917 Pack of 10 Ariens 51001600 Snowblower Shear Pins & 10 Lock Nuts
List Price: $22.00
Our Price:
$7.99
You save $14.01!
Pack of 10 Ariens 51001600 Snowblower Shear Pins & 10 Lock Nuts
Replaces (OEM): ARIENS 51001600, HOMELITE/JACOBSEN 342449, 400120, 444708
This shear bolt fits popular Ariens small frame model snowthrowers snowblowers.
Length: 1 61/64"
OD: 1/4"
R2235 - Universal Vented Gas Cap with Shutoff for Newer Style Tanks
List Price: $8.55
Our Price:
$7.99
You save $0.56!
Replaces (OEM): ARIENS 01538400
BOBCAT 48587
BRIGGS & STRATTON 397975, 493988 & 493988S
ENCORE 363257
GRASSHOPPER 100210
HOWARD PRICE 09-528
HUSQVARNA 539 91 43-63
HUSTLER 779306
JOHN DEERE AM107344
KEES 914363
KOHLER 15 173 02-S
LESCO 050262
MTD 751-3111 & 951-3111
MURRAY 23711 & 92317
SIMPLICITY 1678045 & 1714020
SNAPPER 1-2515, 1-9378 & 7012515
TORO 112-0321
TROY BILT 951-3111
Fits Models: ARIENS Mini Zoom, Sport Zoom, EZR, HVZ, rear engine rider and yard tractors
BRIGGS & STRATTON For 7 thru 12.5 HP vertical, 3.5, 5 & 9 HP Industrial Plus & 5.5 HP Intel engines
UNIVERSAL Also fits Lawn-Boy and other brands
Inside Diameter: 2"
At198-545 Ariens 12023 Plastic Wheel Bearing Support
Our Price:
$7.99
Replaces (OEM): ARIENS 12023
Fits Models: ARIENS 20", 24" and 32" snowblower attachments drive train.
Length: 3"
Width: 2 1/2"
ID: 1"
Height: 31/64"
Three 17/64" mounting holes
Plastic
R5933 Universal Starter Solenoid fits Ariens, AYP, Bolens, Gilson, Grasshopper, Gravely, Lawn-Boy, Simplicity, Snapper & Toro
List Price: $17.95
Our Price:
$8.25
You save $9.70!
Replaces OEM #: ARIENS 03551000, 35510, 3551000
AYP/ROPER/SEARS 192507
BOLENS 175-2137, 175-3539
GILSON 212655
GRASSHOPPER 184251
GRAVELY 45071
LAWNBOY 740207
SIMPLICITY/ALLIS CHALMERS 1685290, 1700751
SNAPPER/KEES 1-8604, 75622
TORO/WHEEL HORSE 11-0116, 47-1910
LOWER STUD THREAD: 3/16"
UPPER STUD THREAD: 1/4"
R10771 3 pole, 12 volt Universal Starter Solenoid for Murray, Noma, Ariens, MTD & Snapper
Our Price:
$8.36
REPLACES MURRAY 21261 & 24285,
AMF/DYNAMARK/NOMA 53716,
ARIENS 3057700,
MTD 725-0530, 725-0771, 725-1426, 925-0771 & 925-1426,
SNAPPER/KEES 1-8817 & 75671,
Universal starter solenoid. 3 pole, 12 volts. Terminal post will accommodate both 5/16" & 1/4" terminal connectors.
Mounting bracket will accommodate both chassis and wall mount configurations.
R918 Pack of 10 Ariens 532005 Snowblower Shear Pins & 10 Lock Nuts
List Price: $25.30
Our Price:
$8.60
You save $16.70!
Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Fits Some Ariens Models ST524, ST724, ST824 & ST520, To make sure these bolts fit your Ariens snowblower, please check your actual model number.
JOHN DEERE 524D, 724D, 826D and 1332DDE walk-behind snowthrowers
Length: 1 9/16"
OD: 1/4"
R916 Pack of 10 Ariens 510015, 10195 Snowblower Shear Pins & 10 Lock Nuts
List Price: $21.50
Our Price:
$8.70
You save $12.80!
Replaces (OEM): ARIENS 510015, 10195
JOHN DEERE AM136890
10 Replacement Shear pins (shear bolts) with lock nuts for Ariens snowblowers.
THREAD SIZE: 2-1/8" X 5/16"
Fits many models of Ariens snowblowers, such as a 10ML35, 10M4, 10M5, 10M6, 10M6D, 10M7D, 10ML60D, 10ML60, 910002, 910006, 910007, 910008, 910009, 910010, 910013, 910014, 910016, 910017, 910018, 910019, 910020, 910021, 910942, 910954, 910955, 910962, 910965, 910995, 10942, 10954, 10962, 10969, 10970 and most of the later model bigger snowblowers as well.
Also fits JOHN DEERE 828D, 924DE, 1032D, 1128DDE, 1128DE and 1332DDE walk-behind snowthrowers
At133-700 Ariens 3003 Drive Disc
List Price: $11.19
Our Price:
$8.95
You save $2.24!
Replaces (OEM): ARIENS 00170800, 3003 & 00300300, CASE C22891, GILSON 18915 & 32222,
HOMELITE/JACOBSEN 158458 & 990152, JOHN DEERE AM122115, LAWN-BOY 741316, LESCO 050559,
MURRAY 35550, SNAPPER/KEES 1-0765 & 7010765 & 7018782, TROY BILT 1720859.
Fits ARIENS ST824DLE, ST928LE, ST1024, ST1028 & ST1132,
Fits TROY BILT 42010, 42012, 42033, 42034, 42036, 42039, 42040 & 42041 self-propelled mowers; 42051 & 42052 snowblowers.
Fits John Deere 828D, 924DE, 1032D, 1128DE, 1128DDE, 1332DDE Walk Behind Snowblowers.
Also fits Sears Rider made by Murray.
ID: 3"
OD: 6"
Drive disc has been ground to remove the center rib for improved performance and smoother operation.
R10772 4 pole, 12 volt Universal Starter Solenoid for Ariens, AYP, Bolens, Case, Exmark, Gilson, Grasshopper, Gravely, Lawn-Boy, Simplicity & Snapper
List Price: $13.99
Our Price:
$8.99
You save $5.00!
Replaces OEM #: Ariens 35510,
AYP 109081X, 109946, 146154,
Bolens 1752137, 1753539,
Case C-266525, C33025,
Exmark 1-513075,
Gilson 212655,
Grasshopper 184251,
Gravely 45071,
Lawn-boy 740207,
Simplicity 170051, 16771993, 16852980, 1700751,
Snapper 18604, Toro 47-1910, 110116, 1101162, 110167.
Universal starter solenoid. 4 pole, 12 volts. Terminal post will accommodate both 5/16" & 1/4" terminal connectors. Mounting bracket will accommodate both chassis and wall mount configurations.
S780-380 Ariens 01202300 Wheel Bearing Support
List Price: $12.13
Our Price:
$9.25
You save $2.88!
Replaces (OEM): ARIENS 01202300.
Fits Models: ARIENS 20", 24" and 32" snowblower attachments drive train.
Length: 3"
Width: 2 1/2"
ID: 1"
Height: 31/64"
Three 17/64" mounting holes
Aluminum
R9127 Throttle Control Replaces Ariens 69087 for Ariens Rear Engine Riders with Tecumseh engines
List Price: $33.90
Our Price:
$9.80
You save $24.10!
Replaces OEM#: Ariens 69087, 06908700
FITS ARIENS REAR ENGINE RIDERS WITH TECUMSEH ENGINES. VINYL WRAPPED CONDUIT.
CONDUIT LENGTH: 38-7/8"
INNER WIRE LENGTH: 39-7/8"
WIRE TRAVEL: 1-1/2"
R6059 - 14-5/8" Ariens 31213 Blade
List Price: $17.49
Our Price:
$9.99
You save $7.50!
REQUIRES (3) FOR 42" CUT ARIENS; DECK #831038 GT
Replaces OEM #: 31213, 3121359
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 14-5/8"
THICKNESS: 0.2040"
WIDTH: 2"
R9659 Plunger Interlock Switch for Ariens, AYP, Dixon, Exmark, John Deere, MTD & Snapper
List Price: $13.30
Our Price:
$9.99
You save $3.31!
Replaces OEM#: ARIENS 08828100, 88281
AYP/ROPER/SEARS 109553X
BLACK ROCK 119-3502
BOBCAT/RANSOM 108208
BOLENS 175-1328
BUNTON-GOODALL PL7484
BUSH HOG 99073
COMMERCIAL TURF PROD 12242
DIXON 539115802
DIXON INDUSTRIES 4242
ENCORE 523034
EXMARK 633111
FERRIS 22095
GARDEN WAY 1751328
GRASSHOPPER 183894
HOWARD 02-425
JOHN DEERE AM-128925
LESCO 12242
MORIDGE 183894
MTD 725-3169A
MURRAY 91299
NATIONAL 7325
SIMPLICITY/ALLIS CHALMERS 1717050, 1717050SM
SNAPPER/KEES 101080, 23355
Double pole, snap in mounting. Normally open/normally closed.
At172-104 Pack of 10 Ariens 62013 Snowblower Carriage Bolts
Our Price:
$9.99
Replaces (OEM): ARIENS 62013, 06201300
Fits Ariens Snowblower Models: ST824S, ST824, ST828, ST924, ST924E, ST928, ST1024, ST1028, ST1032, ST1228, ST1228E, ST1232, ST1232E, ST1236, ST1236E, 36" & 48" Two Stage Sno-Thro, 40" Sno-Thro Attachment.
Length: 1"
OD: 3/8"
At172-105 Pack of 10 Snowblower Carriage Bolt fits Ariens 62026 & MTD 710-0260
Our Price:
$9.99
Replaces (OEM): ARIENS 62026 & MTD 710-0260
Fits Ariens ST420, ST520 20" Snowblowers, ST524, ST624, ST724, ST824, ST832, ST1032, ST8 24" & 32" Snowblowers and 24 & 32" Snowblower Attachments.
Fits MTD 22", 24", 26", 28", 45" Snowblowers and 36" Snowblower Attachments
Length: 3/4"
OD: 5/16"
At172-106 Pack of 10 Snowblower Carriage Bolts fits Ariens 62010 & MTD 710-0389
Our Price:
$9.99
Replaces (OEM): ARIENS 62010 & MTD 710-0389
Fits Ariens ST420, ST424, ST520, ST524, ST624, ST724, ST732, ST824, ST824S, ST828, ST924, ST1028, ST1228E, ST1032, ST1032E, ST1236, ST1236E.
Also fits 20", 24", 32", 36" & 40" Snowblower Attachments.
Fits MTD 195-469-000, 195-486-000 196-486-000, 190-486-000 36" Snow Thrower Attachments, 190-623-000, 190-623-000, 190-624-000, 190-624-000, 310355, 310385, 311355, 311385, 31355-9, 31385-9 and many more MTD models
Length: 3/4"
OD: 3/8"
R3326 - 16-5/8" Ariens 30278 Blade
List Price: $16.45
Our Price:
$10.05
You save $6.40!
REQUIRES (3) FOR 48" CUT ARIENS, CENTER BLADE FOR ARIENS 60" CUT, GT DECK.
Replaces OEM #: 30278, 03027859, 3027859, 03027800
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 16-5/8"
THICKNESS: 0.1800"
WIDTH: 2-1/2"
R9129 Throttle Control replaces Ariens 69032 39032
List Price: $36.80
Our Price:
$10.20
You save $26.60!
Replaces OEM#: Ariens ARIENS 06903200, 39032, 69032
Fits snowblower models 10954, 10962, 10965, 10969, 10970.
Negative action "F" to "S".
Has bracket for side mounting
CONDUIT LENGTH: 27-1/8"
INNER WIRE LENGTH: 29"
WIRE TRAVEL: 1-3/4"
R8869 Ariens 54080 Bearing Ball 1/2 X 1-3/8 also fits John Deere, Husqvarna & MTD
List Price: $14.95
Our Price:
$10.25
You save $4.70!
Replaces (OEM): ARIENS 05408000, HUSQVARNA 606 00 01-84, JOHN DEERE AM122108, MTD 741-0133, WOODS 05408000
Fits Models: ARIENS 824 snowblowers, JOHN DEERE 524D, 724D, 826D, 828D and 1032D walk behinds and snowblowers, MTD 824, 840, 850 and 960 series.
HEIGHT: 7/16"
ID: 1/2"
OD: 1-3/8"
R813 Ariens 05404500 Bearing with Race also fits AYP, Bolens, Cub Cadet, Gilson, John Deere, Massey Ferguson, Simplicity, Snapper & Toro
List Price: $11.65
Our Price:
$10.65
You save $1.00!
Replaces (OEM): ARIENS 54045, 54055
AYP/ROPER/SEARS 1553H, 1554H
BEARING LM11910, LM11949
BOLENS 118-5275
CUB CADET 651814-R1, 651815-R91
GILSON 1044, 1140
JOHN DEERE 8188, 8226, JD-8188, JD-8226
MASSEY FERGUSON 831-054-M1, 831-055-M1
SIMPLICITY/ALLIS CHALMERS 154393, 154486, 2154393, 2154393SM, 2154486, 2154486SM
SNAPPER/KEES 1-2931
TORO/WHEEL HORSE 254-78, 254-79
Fits Models: JACOBSEN Greensking II and IV, Trim King, Tri-King 1471, 1671, 1684D, LF100 and 3810
JOHN DEERE 2243, 2653, 3215, 3225, 3235 and 3365
TORO Roughmaster, Greensmaster, Spartan and Reelmaster
ID: 3/4"
OD: 1-25/32"
Height: 21/32"
R8425 Ariens 72114 Snowblower belt
List Price: $17.50
Our Price:
$10.99
You save $6.51!
Replaces (OEM): ARIENS 72114
Fits Ariens Snowblower Models 932001, 932004, 932006, 932016, 932025, 932500, 932103, 932310, 932400, 932007, 932019, 932020, 932022, 932023, 932015, 932017, 932018
Fits Ariens Tiller Model 832004
Raw edge belt.
Width: 1/2" (12.70mm)
Length: 34-1/2" (876.30mm)
S120-265 Oil Filter fits Ariens, Bobcat, Cub Cadet, Hitachi, John Deere and Toro
List Price: $12.52
Our Price:
$11.15
You save $1.37!
Replaces (OEM): ARIENS 03192800
BOBCAT 48045B
CUB CADET IH-395789-R2
CUB CADET 723-3014
CUB CADET 923-3014
HITACHI AM39653
JOHN DEERE AM39653
TORO 108335
TORO 79-5270
Fits Models:
ARIENS Hydro series
BOBCAT XM and 700 hydro series
CUB CADET 1250, 1450 and 1862
GRAVELY Pro Master 400
HITACHI Loader: LX120 and LX150 with Hino EP100T eng;LX120-2, LX150-3, LX150-5, LX230-3 and LX230-5 with John Deere Eng; LX150-2 with John Deere 6076 eng; LX150-2 with John Deere 6081 eng; LX150-2 with Nissan NE6 eng.
JOHN DEERE Front mount mowers F911, F912, F915, F925, F932 and F935; Z-trak mowers F620, F680, F687,F737 and F757; lawn tractors 230, 140, 300, 312, 314, 316, 317, 318, 322, 330, 332, 400, 420 and 430.Loaders: 444J, 444H LL and 444HTC with 4045T Powertech Eng; 544H, 544H LL, 544HTC and624H with 6068 Powertech Eng; 544J and 624Jwith 6068H eng; 624G with 6068T eng; 644G with 6076 eng; 644J and 724J with 6081 Powertecheng; 644J with 6081H eng; 744H with 6125A Powertech eng; 744J, 824J and 844J with 6125 Powertech eng.
TORO 300, 400 and 500 hydro series
Specs: OD:3 1/2"
Height:3 3/4"
Micron:16
Thread Size:3/4" -16
U.S. Made
R8429 Ariens 72098 Snowblower Belt
List Price: $16.65
Our Price:
$11.50
You save $5.15!
Replaces (OEM): ARIENS 72098.
Raw edge belt. Fits 92400 series. Models 00026, 27, 32, 33, 36, 38, 39, 46, 48, 49 & some 51, 52.
Width: 3/8" (9.53mm)
Length: 33" (838.20mm)
R9128 Throttle Control Replaces Ariens 69076 for Ariens Rear Engine Riders with Briggs & Stratton engines from 1971-1979
List Price: $21.35
Our Price:
$11.55
You save $9.80!
Replaces OEM#: Ariens 69076, 06907600
FITS BRIGGS & STRATTON POWERED ARIENS REAR ENGINE RIDERS FROM 1971-1979.
CONDUIT LENGTH: 50-7/8"
INNER WIRE LENGTH: 52-7/8"
WIRE TRAVEL: 1-1/2"
R5566 - 23-3/4" Ariens 10164 Snowblower Scraper Bar
List Price: $17.85
Our Price:
$11.80
You save $6.05!
Replaces (OEM): ARIENS 10164.
Fits ARIENS Model 924082; 24" walk behind & tractor mount.
Length: 23-3/4"
Width: 2"
Thickness: 0.15"
Five 5/16" square mounting holes.
Steel Construction, Painted Orange.
R5134 Set of 2 Ariens 01016500/02459951/02483851/02483859 Double Sided, Reversible Snowblower Skids
List Price: $16.48
Our Price:
$11.99
You save $4.49!
Replaces (OEM): ARIENS 01016500, 02459951, 02483851, 02483859
JOHN DEERE M124413, M144012
MTD 05002, 05002-0637
Fits Models:
ARIENS ST824, ST1024, ST1028, SST1332. ST1128 and ST1336
JOHN DEERE 524D, 724D, 826D, 828, 924DE, 1032, 1128DDE and 1332DDE walk behind snowblowers
MTD 190-486-000, 19486C, 196-486-000, 310345, 311345, 31340-7, 8, C, 31345-9, 31350C
Also Fits Bolens and Simplicity
Length: 5 3/4"
Width: 3 5/8"
Height: 1 1/16"
7/16" W x 1 3/14" slot
Slots are 3" apart
Bolt slots are 3" center to center
R8943 Universal Solenoid fits Ariens, AYP, Bolens, Case, Exmark, Grasshopper, Gravely, Simplicity & Toro
List Price: $21.10
Our Price:
$12.25
You save $8.85!
Replaces OEM #: ARIENS 03551000, 35510, 3551000
AYP/ROPER/SEARS 146154
BOLENS 175-2137, 175-3539
CASE/INGERSOLL C-26525, C-33025
EXMARK 513075
GRASSHOPPER 184251
GRAVELY 45071
SIMPLICITY/ALLIS CHALMERS 1671993, 1686981, 1686981SM, 1700751
TORO/WHEEL HORSE 11-0116, 11-0162, 11-0167, 28-4210
LOWER STUD THREAD: 3/16"
UPPER STUD THREAD: 5/16"
R8351 - BALL BEARING 1/2 X 1-3/8 For Exmark
List Price: $24.75
Our Price:
$12.65
You save $12.10!
Bearing replaces ARIENS 54080, EXMARK 513009, EXMARK 631560, PRIME LINE 7-07476, STENS 215-020, STENS 230-241,
SUNBELT B1BE21 & SUNBELT B1SB8351. Fits 21" self propelled walk behind mowers with 5/8" axle. Used in our 9-8823 bearing kit. Also fits model 824 snowblowers.
Size: ID 1/2", OD 1-3/8", Height 7/16"
Fits front caster wheels.
R6060 - 16-5/8" Ariens 31237 Blade
List Price: $17.95
Our Price:
$12.75
You save $5.20!
REQUIRES (3) FOR 48" CUT ARIENS; DECK #831031 GT.
Replaces OEM #: 31237, 03123759, 3123759, 03123700
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 16-5/8"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R10677 Heavy Duty Starter Solenoid for John Deere, Noma, Ariens, Bolens, MTD, Toro & Murray
List Price: $23.95
Our Price:
$12.99
You save $10.96!
Replaces OEM #:
AMF/DYNAMARK/NOMA 53716
ARIENS 03057700, 3057700
BOLENS 1751569
JOHN DEERE AM130365, AM132990, AM133094, AM138497
MTD 725-0530, 725-0771, 725-0771, 725-1426, 925-0771, 925-1426
MURRAY 21261, 21261, 24285, 924285
TORO/WHEEL HORSE 111674
R8432 Ariens 72047 Snowblower Belt
List Price: $16.15
Our Price:
$12.99
You save $3.16!
Replaces ARIENS 72047
FITS ARIENS OLDER MODEL WITH SINGLE BELT. WRAPPED BELT.
Length: 35-1/2"
Width: 3/8"
S215-103 Roller Bearing
List Price: $15.31
Our Price:
$13.50
You save $1.81!
Replaces (OEM): ARIENS 05406900
CUSHMAN 814473
DIXIE CHOPPER 10207
EZ-GO 11750G2
FERRIS 20884
FERRIS 5020884
GILSON 1045
GRASSHOPPER 122552
JOHN DEERE JD8933
LAWN-BOY 254-94
LAWN-BOY 703210
SCAG 48005-05
SCAG 481896
SIMPLICITY 170835
SIMPLICITY 2170835
TAYLOR-DUNN 80-103-00
TORO 254-94
UNIVERSAL L44643
Fits Models: EZ-GO Front wheel bearing for carts with 1" spindle
FERRIS Front wheel bearing for carts with 1" spindle
GRASSHOPPER Front wheel bearing for carts with 1" spindle
JOHN DEERE 46"-50" snowthrowers; 51" rotary brooms; 303,305, 550 and 1500 tillers
SCAG New style spindles
TORO Reelmaster 223D and 5100D and Greensmaster 3,300, 3000 and 3100
REF. NO.: L44643
ID: 1.000"
Height: 0.579"
Tapered
Fits our S215-111 Bearing Race
R2181 FLAT IDLER PULLEY FOR ARIENS REPL 12132 (5/16" X 2-1/2")
List Price: $19.95
Our Price:
$13.69
You save $6.26!
Replaces:
ARIENS 01213200
ARIENS 12132
ARIENS 1213200
PRIME LINE 7-05200
STENS 280-198
STENS 280-594
SUNBELT B1SB2181
A: 2-1/2"
B: 2"
C: 5/16"
D: 13/16"
E: 3/4"
H: 3/32"
T: .040"
R6254 - 20 5/16 Ariens 36247 Blade
List Price: $23.38
Our Price:
$13.85
You save $9.53!
Replaces OEM #: 03624700, 03624759, 36247 & 3624759
Requires (2) blades for 40" cut front engine rider model YT 13, 14 & 15 hp
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 20-5/16"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R8426 Ariens 72131 Snowblower belt
List Price: $16.60
Our Price:
$13.99
You save $2.61!
Replaces (OEM): ARIENS 72131.
Raw edge belt. Fits models 924085, 924087, 924091 & 924092, 12 hp engines.
Width: 3/8" (9.53mm)
Length: 36" (914.40mm)
R3322 - 20-1/2" Ariens 11370 Blade used on 21" BBC walk behind mowers
List Price: $19.25
Our Price:
$14.05
You save $5.20!
Replaces OEM #: 01137000, 01137059, 11370 & 1137059
ZONE START MOWER. USED ON ARIENS 21" BBC WALK BEHIND MOWERS
C. H. DIA: 13/32"
CUT DIRECTION: RIGHT
LENGTH: 20-1/2"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R6061 - 19-7/16" Ariens 35355 Blade
List Price: $22.69
Our Price:
$14.35
You save $8.34!
Replaces OEM #: 03535500, 03535551, 35355 & 3535551
Requires (2) blades for 38" cut Deck #835000 series
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 19-7/16"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R8427 Ariens 72130 Snowblower belt
List Price: $18.95
Our Price:
$14.50
You save $4.45!
Replaces (OEM): ARIENS 72130, YAZOO 1309.
Raw edge belt.
Fits models 924085, 924087, 924091 & 924092, 10 hp engines.
Width: 1/2" (12.70mm)
Length: 39" (990.60mm)
HYDRO GEAR 2513018 BDP OVERHAUL SEAL KIT
Our Price:
$14.62
Replaces (OEM): HYDRO GEAR 2513018
R8430 Ariens 72066 (8-12hp) Snowblower belt
List Price: $18.65
Our Price:
$14.99
You save $3.66!
Replaces (OEM): ARIENS 72066.
Raw edge belt. Fits models 924080, 924082, 924084, 924085, 924086, 924087, 8-12 hp engines.
Width: 3/8" (9.53mm)
Length: 34" (863.6mm)
At180-376 Throttle replaces Ariens 69080, 69105, 69124
Our Price:
$15.11
Replaces: Ariens #69080, #69105, #69124
Type: Throttle Cable (Vinyl Covered)
Conduit: 30-1/4”
Inner wire: 33”
Wire travel: 1-3/4”
R8431 Ariens 72086 Snowblower belt
List Price: $17.65
Our Price:
$15.15
You save $2.50!
Replaces (OEM): ARIENS 72086.
Raw edge belt.
Fits models 924082, 8 hp engines.
Width: 1/2" (12.70mm)
Length: 40" (1016.00mm)
R11470 Multi-Application PTO Switch for Ariens, Exmark & Toro
List Price: $20.24
Our Price:
$15.45
You save $4.79!
Replaces OEM #: ARIENS 01545600
EXMARK 103-5221
TORO/WHEEL HORSE 95-7489
Fits Lazer Z, Turf Tracer & Turf Ranger models.
R5575 Pack of 10 Snowblower Shear Pins/Bolts for Ariens 52100100
List Price: $21.50
Our Price:
$15.50
You save $6.00!
Replaces (OEM): ARIENS 52100100
Fits Models: ARIENS 2007 model series 921001, 921002 and 921003 that take the new black shear bolt.
Length: 1-3/4"
OD: 5/16"
Wrench Size: 1/2"
R5510 - 20" Ariens 32159 Scraper Bar
List Price: $21.45
Our Price:
$15.65
You save $5.80!
Replaces (OEM): ARIENS 32159.
Fits model 2 + 2.
Length: 20"
Width: 2 5/8"
Five 7/8" mounting holes.
R9650 - Vented Fuel Cap
List Price: $22.88
Our Price:
$15.75
You save $7.13!
Vented fuel cap replaces Ariens 7525300,
Ferris 1521866, 1522158,
Great Dane D18097,
John Deere RE64733,
Snapper 28903, Scag 482547 and many more.
Diameter 3-1/2"
R7683 - Ariens 54137 Bearing 21/32" X 1-3/8"
List Price: $19.95
Our Price:
$15.95
You save $4.00!
Hex Bearing replaces Ariens 54137. Hex bore, (2) per unit. For 21" cut self-propelled models.
Replaces OEM #: 54137
Size: ID 21/32", OD 1-3/8", Height 7/16"
At133-703 Ariens 02201300 Drive Disc also fits John Deere, Murray, Craftsman & Noma
List Price: $23.83
Our Price:
$15.95
You save $7.88!
Replaces (OEM): ARIENS 03240700, 02201300, 03248300, 22013 & 2201300, AMF/DYNAMARK/NOMA 1325, 313883 & 53830, JOHN DEERE AM123355, MURRAY 1501435, 1501435MA.
Fits ARIENS 922003, 922006-922010, 922012-922022 Snowblowers.
Fits JOHN DEERE 524D, 724D and 826D Snowblowers
Fits many Murray & Craftsman Snowblowers
Fits NOMA 21" SELF PROPELLED MOWERS
ID: 2-1/4"
OD: 4-7/16"
R7922 PTO Switch for Ariens, Grasshopper, Woods & Scag
List Price: $37.07
Our Price:
$15.99
You save $21.08!
PTO switch replaces Ariens 36024, Grasshopper 604796, 184082, Woods 70422, Scag 48787.
Fits 936 series YT tractor models 936002, 936003, 936004, 936005, 936006, 936008, 936009, 936010, 936011 & 936012.
Includes mounting hardware.
S230-283 - Ariens 05417700, John Deere AM122105 Axle Bearing
List Price: $21.28
Our Price:
$15.99
You save $5.29!
Replaces (OEM): ARIENS 05417700
JOHN DEERE AM122105
REF NO 8276-1
Fits Models: ARIENS 924 series snowthrowers
Specs:
ID:1.129 "
OD:2.182 "
Height:0.627 "
GENUINE ARIENS 72089 SNOWBLOWER DRIVE BELT FOR MODEL 10ML35
Our Price:
$15.99
Genuine Ariens Snowblower Drive Belt for Model 10ML35
Width: 1/2"
Length: 36"
Not an aftermarket Belt
R487 Ariens 05406300 Sealed High Speed Bearing
List Price: $22.83
Our Price:
$16.25
You save $6.58!
Replaces (OEM): ARIENS 05406300, JOHN DEERE AM122158, TORO 251-207, BEARING SC0493LU.
Fits Models: ARIENS ST424, ST524, ST624, ST724, ST732, ST824, ST832; 824, 932 and 1032 snowblowers, TORO 824 and 932
ID: 0.75"
OD: 1.75"
Height: 0.5"
Or73-030 - Universal Snow Blower Shoe
List Price: $24.09
Our Price:
$16.50
You save $7.59!
Fits White models ST800, 850, ST950, 1050, Ariens models ST524, ST824, ST924.
Also fits many Toro, MTD, John Deere, Noma, Murray, Snapper & Argo Allis models.
Slots are adjustable between 2" and 3" apart.
R6789 - 22-3/8" Ariens 30.30328 Blade for 26" rear engine rider
List Price: $22.95
Our Price:
$16.95
You save $6.00!
Replaces OEM #: 30328
For 60" Cut, Fits deck model 831026
REQUIRES (2) R6789 & (1) R3326 BLADE FOR 60" CUT.
C. H. DIA: 3/4"
LENGTH: 22-3/8"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R1096 - 26" Ariens 3165 Blade for 26" rear engine rider
List Price: $32.88
Our Price:
$16.95
You save $15.93!
Replaces OEM #: 3165
For 26" rear engine rider. Uses our
R911
air lifts
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 26"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R8762 Ariens 72023 Snowblower Traction Drive Belts
List Price: $27.00
Our Price:
$17.75
You save $9.25!
Replaces (OEM): ARIENS 72023.
Fits models 1975-1978 & Sno-Tro model. Drive belt 4 & 5 hp, 1969-1974 models 922018, 922019, 922020 & 922021.
Raw edge, traction drive belt.
Sold in matching pairs.
Width: 1/4" (6.35 mm)
Length: 27.153" (689.69 mm) 27.153" (689.69 mm
S302-717 17" Toothed Blade Fits Ariens/DixieChopper/Dixon/Gravely/Toro
List Price: $25.56
Our Price:
$17.85
You save $7.71!
Replaces (OEM): ARIENS 08779200
DIXIE CHOPPER 30227-H
DIXIE CHOPPER 30227-N
DIXON 8689
DIXON 9229
GRAVELY 046998
GRAVELY 08779200
TORO 113579
TORO 30227
Specs: Length:17"
Width:3"
Center Hole:5/8"
Thickness:.250"
S/F:Straight
S302-816 20 3/4" Toothed Blade Fits Ariens/Bobcat/Exmark/Ferris/GiantVac/Huqvarna/Jacobsen/Kees/Snapper
List Price: $23.44
Our Price:
$17.85
You save $5.59!
Replaces (OEM): ARIENS 00273000
ARIENS 04919100
ARIENS 04920600
BOBCAT 112111-01
BOBCAT 2722543-01
EXMARK 103-6336-S
EXMARK 103-6581
EXMARK 103-6581-S
FERRIS 1520843
FERRIS 1520843S
FERRIS 5020843
GIANT VAC 0640
HUSQVARNA 539101496
JACOBSEN 390666
KEES 100340
KEES 483011
KEES 483046
SNAPPER 1-7036
SNAPPER 7-6675
SNAPPER 7017036
Specs: Length:16 1/4"
Width:3"
Center Hole:5/8"
Thickness:.250"
S/F:Straight
S302-818 18" Toothed Blade Fits Ariens/Bobcat/Bunton/Encore/Exmark/Ferris/GiantVac/Gravely/GreatDane/Husqvarna/Jacobsen/JohnDeere/Kees/Lesco/Scag/Snapper/Toro
List Price: $24.00
Our Price:
$17.85
You save $6.15!
Replaces (OEM): ARIENS 00273100
ARIENS 03399704
ARIENS 04916400
ARIENS 04917900
ARIENS 3399704
BOBCAT 112111-02
BOBCAT 2722543-02
BUNTON PL4206
BUNTON P2005
ENCORE 363046
ENCORE 363291
EXMARK 1-303146
EXMARK 1-303527
EXMARK 1-633482
EXMARK 103-2518
EXMARK 103-6582
EXMARK 103-6582-S
FERRIS 1521227
FERRIS 1521227S
FERRIS 5021227
GIANT VAC A581
GRAVELY 00450300
GREAT DANE D18037
GREAT DANE GDU10231
HUSQVARNA 539 10 14-85
JACOBSEN 390655
JOHN DEERE AM104490
KEES 100341
KEES 363055
LESCO 050125
SCAG 481711
SCAG 482961
SCAG 483317
SNAPPER 1-7037
SNAPPER 7-6450
SNAPPER 7075751
SNAPPER 75751
TORO 105-7779-03
TORO 105-7781
TORO 105-7781-03
WRIGHT MFG 71440001
Specs: Length:18"
Width:3"
Center Hole:5/8"
Thickness:.250"
S/F:Straight
S302-820 20 1/2" Toothed Blade Fits Ariens/DixieChopper/Dixon/Exmark/Gravely/JohnDeere/Toro
List Price: $27.80
Our Price:
$17.85
You save $9.95!
Replaces (OEM): ARIENS 08899100
ARIENS 09081200
BAD BOY 038-6050-00
DIXIE CHOPPER 30227-60H
DIXON 9383
EXMARK 1-633483
EXMARK 103-0301
EXMARK 103-6338-S
EXMARK 633483
GRAVELY 046999
GRAVELY 046999
GRAVELY 08898900
GRAVELY 08979600
GRAVELY 08979651
JOHN DEERE 103-0301-S
TORO 105-7718-03
TORO 105-7777-03
Specs: Length:20 1/2"
Width:3"
Center Hole:5/8"
Thickness:.250"
S/F:Straight
S215-350 ROLLER BEARING SET REPLACES TROY BILT GW-11522
List Price: $21.58
Our Price:
$17.99
You save $3.59!
Replaces (OEM): ARIENS 05404600
ARIENS 05404700
COLUMBIA 9045
COLUMBIA 9048
COLUMBIA 9049
CUSHMAN 320112
CUSHMAN 386767
JACOBSEN 500535
JOHN DEERE JD8187
JOHN DEERE JD8225
REF NO LM67010
REF NO LM67048
TAYLOR-DUNN 80-011-00
TAYLOR-DUNN 80-102-00
TROY BILT GW-11522
WOODS 2303
Fits Models: COLUMBIA Fork stem wheelsFork stem wheels
CUSHMAN DifferentialDifferential
JOHN DEERE 365, 855, 955, 2243, 3325 and 3365365, 855, 955, 2243, 3325 and 3365
TROY BILT Horse tillersHorse tillers
Specs:
ID:1.250 "
OD:2.328 "
Height:0.657 "
For tine shaft
R3323 - 28" Ariens 27285 Blade for 28" rear engine rider
List Price: $33.72
Our Price:
$18.15
You save $15.57!
Replaces OEM #: 27285 & 2728551
For 28" rear engine rider. Uses our
R911
air lifts
C. H. DIA: 3/4"
CENTER TO CENTER (OUTSIDE HOLES): 11"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 25/64"
LENGTH: 28"
THICKNESS: 0.1800"
WIDTH: 2-3/4"
R6445 - 26-7/8" Ariens 2749359 Blade fits 28" riding mowers
List Price: $30.62
Our Price:
$18.25
You save $12.37!
Replaces OEM #: 2749351
Fits 28" riding mowers
C. H. DIA: 7/16"
CENTER TO CENTER (OUTSIDE HOLES): 4"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 3/8"
LENGTH: 27-7/8"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
S302-618 18" Toothed Blade Fits Ariens/Bobcat/Bunton/Encore/Exmark/Ferris/GiantVac/Gravely/GreatDane/Husqvarna/Jacobsen/JohnDeere/Kees/Lesco/Scag/Snapper/Toro
Our Price:
$18.47
Replaces (OEM): ARIENS 00273100
ARIENS 03399704
ARIENS 04916400
ARIENS 04917900
ARIENS 3399704
BOBCAT 112111-02
BOBCAT 2722543-02
BUNTON PL4206
BUNTON P2005
ENCORE 363046
ENCORE 363291
EXMARK 1-303146
EXMARK 1-303527
EXMARK 1-633482
EXMARK 103-2518
EXMARK 103-6582
EXMARK 103-6582-S
FERRIS 1521227
FERRIS 1521227S
FERRIS 5021227
GIANT VAC A581
GRAVELY 00450300
GREAT DANE D18037
GREAT DANE GDU10231
HUSQVARNA 539 10 14-85
JACOBSEN 390655
JOHN DEERE AM104490
KEES 100341
KEES 363055
LESCO 050125
SCAG 481711
SCAG 482961
SCAG 483317
SNAPPER 1-7037
SNAPPER 7-6450
SNAPPER 7075751
SNAPPER 75751
TORO 105-7779-03
TORO 105-7781
TORO 105-7781-03
WRIGHT MFG 71440001
Specs: Length:18"
Width:2 1/2"
Center Hole:5/8"
Thickness:.203"
S/F:Straight
Genuine Ariens 07200111 Snowblower Traction Drive Belt
List Price: $24.99
Our Price:
$18.50
You save $6.49!
ARIENS Part # 07200111
Traction Drive belt for use on Ariens Sno-Thro's including models 921005 (ST924LE), 921006 ST1130DLE), 926027 (ST1332LE).
Width: 3/8"
Length: 35-1/2"
S302-620 20 1/2" Toothed Blade Fits Ariens/DixieChopper/Dixon/Exmark/Gravely/JohnDeere/Toro
Our Price:
$19.80
Replaces (OEM): ARIENS 08899100
ARIENS 08979600
ARIENS 09081200
BAD BOY 038-6050-00
DIXIE CHOPPER 30227-60H
DIXON 9383
EXMARK 1-633483
EXMARK 103-0301
EXMARK 103-6338-S
EXMARK 633483
GRAVELY 046999
GRAVELY 046999
GRAVELY 08898900
GRAVELY 08979600
GRAVELY 08979651
JOHN DEERE 103-0301-S
TORO 105-7718-03
TORO 105-7777-03
Specs: Length:20 1/2"
Width:2 1/2"
Center Hole:5/8"
Thickness:.203"
S/F:Straight
R1097 - 30" Ariens 3514 Blade
List Price: $28.58
Our Price:
$19.95
You save $8.63!
Replaces OEM #: 27287 & 3514
Uses our
R1131
air lift kit
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 30"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
www.milfordpower.com
Contact Us
Privacy Policy
Send Us Feedback
Company Info
|
Advertising
|
Product Index
|
Category Index
|
Help
|
Terms of Use
Copyright © 2007 Milford Power Equipment. All Rights Reserved.
Sell Online
with Volusion.
