|
|
|
|
|
|
R853- TIE ROD BUSHING 3/8 X 1/2
|
Our Price: $0.28
|
|
|
Replaces; OREGON 45-083, PRIME LINE 7-04109, SNAPPER/KEES 1-3321, SNAPPER/KEES 7013321, STENS 225-219 & SUNBELT B1SB853.
ID 3/8", OD 1/2", Height 3/8", Flange OD 5/8"
|
|
|
|
|
|
|
|
|
|
R2939- STEERING BUSHING 5/8 X 11/16
|
|
Our Price: $0.28
|
|
|
Replaces; OREGON 45-101, PRIME LINE 7-04106, SNAPPER/KEES 1-0694, SNAPPER/KEES 7010694, STENS 225-656 & SUNBELT B1SB2939.
ID 5/8", OD 11/16", Height 5/8", Flange OD 1"
|
|
|
|
|
|
|
|
|
|
R2940- STEERING BUSHING 29/32 X 31/32
|
|
Our Price: $0.30
|
|
|
Replaces; PRIME LINE 7-04111, SNAPPER/KEES 1-2617, SNAPPER/KEES 7012617, STENS 225-797 & SUNBELT B1SB2940.
ID 29/32", OD 31/32", Height 5/8", Flange OD 1-1/4"
|
|
|
|
|
|
|
|
|
|
R854- KING PIN BUSHING 3/4 X 13/16
|
|
Our Price: $0.34
|
|
|
Replaces; OREGON 45-081, PRIME LINE 7-04110, SNAPPER/KEES 1-0986, SNAPPER/KEES 7010986, STENS 225-227 & SUNBELT B1SB854.
ID 3/4", OD 13/16", Height 9/16", Flange OD 1-1/4"
|
|
|
|
|
|
|
|
|
|
R8770 - Wheel Drive Key For Toro 39-9680
|
List Price: $1.50
Our Price: $0.44
You save $1.06!
|
|
|
KEY FITS TORO PROLINE 21" SELF PROPELLED MOWERS.
USED WITH ROTARY# 8207 WHEEL DRIVE GEAR.
HEIGHT: 0.1870"
LENGTH: 0.4520"
WIDTH: 0.1250"
|
|
|
|
|
|
|
|
|
|
R3244- TRANSMISSION PLUG FOR SNAPPER
|
|
Our Price: $0.49
|
|
|
REPL SNAPPER 11024
|
|
|
|
|
|
|
|
|
|
R7177- SQUARE KEY FOR TORO
|
List Price: $0.98
Our Price: $0.50
You save $0.48!
|
|
|
REPL TORO 39-7842
Fits 21" SP walk behind
used on short shaft in gear case.
1/8" x 2"
|
|
|
|
|
|
|
|
|
|
R2972 - Lawn-Boy 609419 Gear Box Gasket
|
List Price: $0.93
Our Price: $0.59
You save $0.34!
|
|
|
Gear Box Gasket. "F" Engines Self-Propelled.
Replaces OEM #: 609419
|
|
|
|
|
|
|
|
|
|
R8816- SHIM WASHER FOR SNAPPER
|
List Price: $0.75
Our Price: $0.59
You save $0.16!
|
|
|
REPL SNAPPER 10121
Fits Snapper 57444 driven disc assembly.
Fits our R6880 driven disc assembly.
ID 3/4"
OD 1"
|
|
|
|
|
|
|
|
|
|
R8052- DRIVE PULLEY KEY FOR B&S
|
List Price: $2.30
Our Price: $0.79
You save $1.51!
|
|
|
REPL B&S 91539 (3/16 X 1-1/2)
Fits models 2 thru 18 hp.
|
|
|
|
|
|
|
|
|
|
R2907- WHEEL BUSHING 7/16 X 9/16
|
|
Our Price: $0.90
|
|
|
Replaces; SNAPPER/KEES 1-2309, SNAPPER/KEES 7012309, STENS 225-304 & SUNBELT B1SB2907.
ID 7/16", OD 9/16", Length 1-5/8"
|
|
|
|
|
|
|
|
|
|
R6931- DRIVE PLATE BUSHING
|
List Price: $1.21
Our Price: $0.99
You save $0.22!
|
|
|
REPL SNAPPER 13893
Bushing only
|
|
|
|
|
|
|
|
|
|
R8603- DRIVE PLATE BUSH'G FOR SNAPPER
|
|
Our Price: $1.08
|
|
|
REPL SNAPPER 17696
Used on 1993 and later models, used in our R6930 assembly.
|
|
|
|
|
|
|
|
|
|
R7255- THRUST WASHER FOR SNAPPER
|
List Price: $1.32
Our Price: $1.09
You save $0.23!
|
|
|
REPL SNAPPER 14523
Usd on smooth clutch assembly between disc and plate.
|
|
|
|
|
|
|
|
|
|
R3247- TRANSMISSION GASKET
|
|
Our Price: $1.22
|
|
|
REPL SNAPPER 11774
Fits all 21" self-propelled mowers.
|
|
|
|
|
|
|
|
|
|
R7836- NYLON KING PIN BUSHING 5/8 X 7/8 FOR MTD
|
List Price: $3.49
Our Price: $1.25
You save $2.24!
|
|
|
Replaces; MTD 741-0225, MTD 941-0225, OREGON 45-100, PRIME LINE 7-07456, STENS 225-532 & SUNBELT B1MT11.
King pin bushing fits 38" and 42" cut front engine riders.
ID 5/8", OD 7/8", Height 5/8"
|
|
|
|
|
|
|
|
|
|
R3246- CHAIN CASE GASKET FOR SNAPPER
|
List Price: $3.92
Our Price: $1.29
You save $2.63!
|
|
|
REPL SNAPPER 18059 & 28761
|
|
|
|
|
|
|
|
|
|
R8632- OIL SEAL FOR SNAPPER
|
List Price: $1.84
Our Price: $1.39
You save $0.45!
|
|
|
REPL SNAPPER 11817
Rear axle oil seal for rear engine riders.
ID 1-1/16"
OD 1-13/16"
|
|
|
|
|
|
|
|
|
|
R8184- FLANGE PLATE FOR BOBCAT
|
|
Our Price: $1.50
|
|
|
Replaces; BOBCAT/RANSOM 65263A, PRIME LINE 7-07453 & STENS 230-064.
Used to hold transmission shaft bearings on 36", 54" and 61" decks.
|
|
|
|
|
|
|
|
|
|
R8970- ADJUSTING NUT OR MURRAY REPLACES MURRAY 21920
|
List Price: $6.95
Our Price: $1.99
You save $4.96!
|
|
|
REPLACES MURRAY 21920. FITS BOLT SIZE 3/8" - 16. LENGTH 1-5/16"
|
|
|
|
|
|
|
|
|
|
R3245- TRANSMISSION CASE GASKET FOR SNAPPER
|
List Price: $4.10
Our Price: $1.99
You save $2.11!
|
|
|
REPL SNAPPER 18060
|
|
|
|
|
|
|
|
|
|
R307 - Small Drive Roller for MTD 07120
|
List Price: $5.48
Our Price: $2.10
You save $3.38!
|
|
|
Replaces OEM: MTD 07120
FITS MTD, WESTERN AUTO,
PENNEYS & WARDS.
NOTCHED FOR LUG TIRES,
ID: 5/8"
OD: 1-1/2"
WIDTH: 2"
|
|
|
|
|
|
|
|
|
|
R9327- KING PIN BUSHING 1 X 1-1/4 FOR MTD
|
List Price: $2.27
Our Price: $2.10
You save $0.17!
|
|
|
King pin bushing replaces MTD 741-0374. Fits MTD model 406 rear tine tiller. Lower chain case bearing on tiller. Flanged OD 1-1/2". (nylon)
ID 1", OD 1-1/4", Height 19/32"
|
|
|
|
|
|
|
|
|
|
R8665- OIL SEAL FOR SNAPPER
|
List Price: $3.53
Our Price: $2.29
You save $1.24!
|
|
|
REPL SNAPPER 14662
Left rear wheel oil seal on 25", 26", 28", 30" and 33" cut rear engine riders.
ID 11/16"
OD 1-27/32"
|
|
|
|
|
|
|
|
|
|
R8099- SWIVEL FOR BOBCAT
|
|
Our Price: $2.51
|
|
|
REPL BOBCAT 33004A
Control rod linkage swivel 5/16"
|
|
|
|
|
|
|
|
|
|
R7158- BRAKE PAD FOR TECUMSEH
|
List Price: $4.24
Our Price: $2.84
You save $1.40!
|
|
|
REPL TECUMSEH 799021/790006
Used on AMF/ Simplicity.
Fits Peerless 600 series transaxles.
Length 1-1/8"
Width 1/2"
Height 1/4"
|
|
|
|
|
|
|
|
|
|
R3227 - Drive Roller for MTD 731-0393
|
List Price: $6.29
Our Price: $2.85
You save $3.44!
|
|
|
Replaces OEM: MTD 731-0393
DRIVE ROLLER FITS MTD.
ID: 1/2"
OD: 2-1/4"
WIDTH: 1-7/8"
|
|
|
|
|
|
|
|
|
|
R6864- REAR AXLE BUSHING (RIGHT SIDE)
|
List Price: $3.92
Our Price: $2.89
You save $1.03!
|
|
|
Replaces; SNAPPER/KEES 1-2296, SNAPPER/KEES 7012296, STENS 225-995 & SUNBELT B1SN61.
ID 1-1/8", OD 1-5/8", Height 1-1/2", Flange OD 1-1/4"
For 26" thru 33" rear engine ride.
|
|
|
|
|
|
|
|
|
|
R308 - Drive Roller for Murray 20066
|
|
Our Price: $2.95
|
|
|
Replaces OEM: Murray 20066
FITS MURRAY.
ID: 5/8"
OD: 2-3/4"
WIDTH: 1-7/8"
|
|
|
|
|
|
|
|
|
|
R309 - Drive Roller for MTD 10914
|
List Price: $5.06
Our Price: $2.95
You save $2.11!
|
|
|
Replaces OEM: MTD 10914
DRIVE ROLLER FITS MTD.
ID: 5/8"
OD: 3-1/8"
WIDTH: 2-5/16"
|
|
|
|
|
|
|
|
|
|
R5713- FLANGED BUSHING 7/8 X 1-1/8
|
List Price: $4.04
Our Price: $3.25
You save $0.79!
|
|
|
Replaces; ENCORE 363007, PRIME LINE 7-04173, SCAG 48100-01, SNAPPER/KEES 7076514, SNAPPER/KEES 76514, STENS 225-722 &
SUNBELT B1CO34.
ID 7/8", OD 1-1/8", Height 1", Flange OD 1-1/2"
|
|
|
|
|
|
|
|
|
|
R10810- SWIVEL FOR 3/8" BOBCAT
|
List Price: $4.42
Our Price: $3.69
You save $0.73!
|
|
|
REPL BOBCREPL BOBCAT 33103
3/8"-18" thread
Pin OD 5/16"
Length 1/2"
|
|
|
|
|
|
|
|
|
|
R8207 - Toro 39-9160 Wheel Drive Gear
|
List Price: $4.79
Our Price: $3.80
You save $0.99!
|
|
|
DRIVE GEAR FITS TORO/WHEEL HORSE MODELS:
22020, 22030, 22035 & 20680 REAR WHEEL DRIVE MODELS.
|
|
|
|
|
|
|
|
|
|
R345- DRIVE DISC LINER FOR SNAPPER
|
List Price: $4.99
Our Price: $3.99
You save $1.00!
|
|
|
REPL SNAPPER 57423 (NON-ASBESTOS)
Lining only
|
|
|
|
|
|
|
|
|
|
R5951- OIL SEAL BOOT FOR SNAPPER
|
List Price: $7.31
Our Price: $3.99
You save $3.32!
|
|
|
REPL 17083,11011,75115 (SHORT)
Length 8-1/4"
|
|
|
|
|
|
|
|
|
|
R5952- OIL SEAL BOOT FOR SNAPPER
|
List Price: $7.91
Our Price: $3.99
You save $3.92!
|
|
|
REPL 17084, 18555 (LONG)
Length 10-1/2"
|
|
|
|
|
|
|
|
|
|
R292 - 5/8" X 7/8" X 1" 8-T Sprocket for MTD 10378
|
List Price: $7.15
Our Price: $4.15
You save $3.00!
|
|
|
Replaces OEM#: MTD 10378
STEEL WHEEL.
USED AS A FRONT WHEEL ON SNAPPER 21" MODELS.
(PAINTED WHITE).
BORE: 7/16"
HUB: 1-5/8" OFFSET
SIZE: 7 X 1.50
TREAD: DIAMOND
|
|
|
|
|
|
|
|
|
|
R7920 - Toro 18-9690 Wheel Drive Gear
|
List Price: $7.25
Our Price: $4.25
You save $3.00!
|
|
|
FITS TORO/WHEEL HORSE SIDE DISCHARGE,
FRONT WHEEL DRIVE SELF PROPELLED MODELS.
|
|
|
|
|
|
|
|
|
|
R2699- CLUTCH CABLE FOR SNAPPER
|
List Price: $5.92
Our Price: $4.25
You save $1.67!
|
|
|
REPL SNAPPER 12605
For 33" rear engine riders.
Length 55"
(Black)
|
|
|
|
|
|
|
|
|
|
R10811- SWIVEL ROD FOR ENCORE
|
List Price: $5.28
Our Price: $4.28
You save $1.00!
|
|
|
REPL ENCORE 363029
5/16"-18" OD 5/16"
Shoulder length 1/2"
|
|
|
|
|
|
|
|
|
|
R8309 - MTD 731-0908 Plastic Drive Roller
|
List Price: $8.16
Our Price: $4.60
You save $3.56!
|
|
|
DRIVE ROLLER FITS MTD
MODELS 1987 WITH SPLINED SHAFT.
ID: 1/2"
OD: 2-1/4"
WIDTH: 1-7/8"
|
|
|
|
|
|
|
|
|
|
R9125- LIFT CABLE FOR MURRAY REPLACES MURRAY 24470 (28-1/4")
|
List Price: $8.50
Our Price: $4.75
You save $3.75!
|
|
|
REPLACES MURRAY 24470, PRIME LINE 7-03944, SILVER STREAK 46-028, STENS 285-817. FITS 38" & 39" CUT MODELS.
28-1/4" TOTAL LENGTH WITH MOLDED ROD END 5/16" X 18" ROD.
|
|
|
|
|
|
|
|
|
|
R301 SNAPPER 10927/23364/7023364 Drive Ring for 22" & 24" two-stage snowblowers
|
List Price: $6.80
Our Price: $4.99
You save $1.81!
|
|
|
Replaces (OEM): SNAPPER 1-0927
SNAPPER 2-3364
SNAPPER 7023364
Fits Models: SNAPPER 21" self-propelled mowers, 22" and 24" two-stage snowthrowers
ID: 3"
OD: 4"
Made by an OEM supplier
|
|
|
|
|
|
|
|
|
|
R10686- BRAKE CABLE FOR MTD
|
List Price: $6.43
Our Price: $4.99
You save $1.44!
|
|
|
REPL MTD 746-0970
Fits 42" deck mowers.
3/8" eyelets on each end.
Length 5-3/4"
|
|
|
|
|
|
|
|
|
|
R478 Murray 20411 Transmission Sprocket 43 Chain 10T 1/2" Bore
|
List Price: $11.95
Our Price: $5.45
You save $6.50!
|
|
|
REPLACES MURRAY 20411
CHAIN TYPE: #43
HEIGHT: 3/4"
ID: 1/2"
NO. OF TEETH: 10
OD: 1"
|
|
|
|
|
|
|
|
|
|
R50190 - METRIC BEARING 52MM X 25MM
|
List Price: $6.05
Our Price: $5.65
You save $0.40!
|
|
|
REPLACES: UNIVERSAL BEARING 6205
HEIGHT: 19/32"
ID: 63/64"
OD: 2-3/64"
|
|
|
|
|
|
|
|
|
|
R10701- 4-7/8" Deck Lift Cable, Replaces Snapper Models. Fits 25"- 41" Decks.
|
List Price: $8.75
Our Price: $5.75
You save $3.00!
|
|
|
DECK LIFT CABLE REPLACES SNAPPER #27427.
FITS 8,9,10 & 11 SERIES REAR ENGINE RIDERS,
HEAVY DUTY "T" SLUG ,
FITS 25"-41" DECKS
LENGTH: 4-1/2
|
|
|
|
|
|
|
|
|
|
R10812- LOWER SWIVEL FOR HUSQVARNA
|
List Price: $11.36
Our Price: $5.99
You save $5.37!
|
|
|
REPL 539-109334
Thread size 3/16"-24
Pin OD 3/16"
Shoulder Length 7/16"
Total length 1"
Also fits Yazoo/Kees
|
|
|
|
|
|
|
|
|
|
R8293- 47" BRAKE CABLE FOR SNAPPER
|
List Price: $7.51
Our Price: $5.99
You save $1.52!
|
|
|
REPL SNAPPER 15476
Fits Snapper rear engine riders with 28" & 30" decks and one brake/clutch pedal.
Length 47"
|
|
|
|
|
|
|
|
|
|
R8294- 50" BRAKE CABLE FOR SNAPPER
|
List Price: $9.33
Our Price: $5.99
You save $3.34!
|
|
|
REPL SNAPPER 15477
Fits Snapper rear engine riders with 33" & 41" decks
and one brake/clutch pedal.
Length 50"
|
|
|
|
|
|
|
|
|
|
R11517- ENGINE BRAKE CABLE FOR MTD
|
List Price: $9.87
Our Price: $5.99
You save $3.88!
|
|
|
REPL MTD 746-0946
Fits most side discharge mowers 1986 & prior.
Snap fit handle, "Z" bend on end.
Conduit 48-1/4"
Inner wire 60-1/4"
|
|
|
|
|
|
|
|
|
|
R2700- CLUTCH CABLE FOR SNAPPER
|
List Price: $8.50
Our Price: $5.99
You save $2.51!
|
|
|
REPL SNAPPER 12425
For 26", 28" and 30" rear engine riders.
Length 51-3/4"
Yellow
|
|
|
|
|
|
|
|
|
|
R8472 - Chaincase Chain replaces SNAPPER 10941, Fits all 25", 26", 28", 30" & 33" rear engine rider
|
List Price: $7.72
Our Price: $5.99
You save $1.73!
|
|
|
Replaces OEM#: SNAPPER 10941
Fits all 25", 26", 28", 30" & 33" rear engine riders.
CHAIN TYPE: NO.35
DRIVE LINKS: 23
|
|
|
|
|
|
|
|
|
|
R422 - 1/2" X 1" X 5/8" 9-T Sprocket for Sears/Craftsman/AYP 67486
|
List Price: $9.09
Our Price: $6.15
You save $2.94!
|
|
|
Replaces OEM: Sears/Craftsman/AYP 67486
CHAIN TYPE: NO. 43
HEIGHT: 5/8"
ID: 1/2"
NO. OF TEETH: 9
OD: 1"
|
|
|
|
|
|
|
|
|
|
R3205 - 1/2" X 13/16" X 13/16"Sprocket for MTD 748-0852
|
List Price: $7.99
Our Price: $6.25
You save $1.74!
|
|
|
REPLACES MTD 748-0852, 948-0852 AND FOOTE B-1084.
FOR 41 CHAIN, 8 TOOTH.
CHAIN TYPE: #41
HEIGHT: 13/16"
ID: 1/2"
KEYWAY: 3/32"
NO. OF TEETH: 8
OD: 13/16"
|
|
|
|
|
|
|
|
|
|
R10813- SHORT SWIVEL FOR EXMARK
|
List Price: $10.28
Our Price: $6.25
You save $4.03!
|
|
|
REPL EXMARK 603676
Bore size 11/32"
Pin OD 5/16"
Shoulder length 1/2"
Total length 1-7/32"
|
|
|
|
|
|
|
|
|
|
R12075- 42" DRIVE CABLE FOR SNAPPER
|
|
Our Price: $6.66
|
|
|
REPL 70034604
Fits 21" self propelled units, eye and "Z" bend endings.
Cable length 42"
|
|
|
|
|
|
|
|
|
|
R9700 - Oil Tank Cap For Exmark/Toro
|
List Price: $9.27
Our Price: $6.99
You save $2.28!
|
|
|
Replaces OEM #: 513167
Oil tank cap replaces Toro E513167.
Also replaces Exmark 513167. 2" Dia.
|
|
|
|
|
|
|
|
|
|
R9752- BRAKE DRUM FOR EXMARK
|
List Price: $9.04
Our Price: $6.99
You save $2.05!
|
|
|
REPL EXMARK 1-323261
Fits Metro units, included in R9751 assembly.
ID 2-1/4"
OD 6"
Width 1-1/4"
|
|
|
|
|
|
|
|
|
|
R11511- ENGINE BRAKE CABLE FOR MTD
|
List Price: $12.63
Our Price: $6.99
You save $5.64!
|
|
|
REPL MTD 746-0551
Fits models 440, E466 and 469 series.
"Z" bend on end.
Conduit 43"
Inner wire 49-1/2"
|
|
|
|
|
|
|
|
|
|
R11514- ENGINE BRAKE CABLE FOR MTD
|
List Price: $12.63
Our Price: $6.99
You save $5.64!
|
|
|
REPL MTD 746-0555
For model 573 with 20" deck, models 370-379 & 445 with 21" rear discharge.
Die cast "Z" bend on each end.
Conduit 55"
Inner wire 61-1/2"
|
|
|
|
|
|
|
|
|
|
R11515- ENGINE BRAKE CABLE FOR MTD
|
List Price: $14.07
Our Price: $6.99
You save $7.08!
|
|
|
REPL MTD 746-0737
For 1994-97 walk behind model series 070, 080,
100, 200, 400 & 500. Die cast "Z" bends on each end.
Conduit 51"
Inner wire 55-1/2"
|
|
|
|
|
|
|
|
|
|
R10817- CONTROL CABLE FOR MTD
|
List Price: $9.66
Our Price: $6.99
You save $2.67!
|
|
|
REPL MTD 746-0553
Fits 1991 and newer push mowers with B&S engine models
030-042, 030-416, 030-418, 030-424, 030-426, 030-428,
030-446, 030-448, 030-456, 030-458, 030-506, 030-508,
030-570 & 030-580.
"Z" bend on each end.
Conduit 36-7/8"
Inner wire 43-1/8"
|
|
|
|
|
|
|
|
|
|
R2953 - Left Drive Roller for Lawn-Boy 607657
|
List Price: $17.36
Our Price: $7.25
You save $10.11!
|
|
|
Replaces OEM#: Lawn-Boy 607657
FITS LAWN-BOY.
LEFT HAND DRIVE ROLLER.
ID: 1/2"
OD: 7/8"
WIDTH: 2-1/4"
|
|
|
|
|
|
|
|
|
|
R2958 - Right Drive Roller for Lawn-Boy 607658
|
List Price: $17.33
Our Price: $7.25
You save $10.08!
|
|
|
Replaces OEM#: Lawn-Boy 607658
RIGHT HAND DRIVE ROLLER.
ID: 1/2"
OD: 7/8"
WIDTH: 2-1/4"
|
|
|
|
|
|
|
|
|
|
R3270 - LEFT HAND DRIVE ROLLER FOR LAWN-BOY 21" SELF-PROPELLED HIGH SPEED MOWER, Lawn-Boy 610441
|
List Price: $36.02
Our Price: $7.75
You save $28.27!
|
|
|
Replaces OEM: Lawn-Boy 610441
LEFT HAND DRIVE ROLLER FOR LAWN-BOY 21" SELF-PROPELLED HIGH SPEED MOWER.
ID: 1/2"
OD: 1-1/8"
WIDTH: 2-1/4"
|
|
|
|
|
|
|
|
|
|
R3269 - RIGHT HAND DRIVE ROLLER FOR LAWN-BOY 21" SELF-PROPELLED HIGH SPEED MOWER, Lawn-Boy 610440
|
List Price: $35.20
Our Price: $7.75
You save $27.45!
|
|
|
Replaces OEM: Lawn-Boy 610440
RIGHT HAND DRIVE ROLLER FOR LAWN-BOY 21" SELF-PROPELLED HIGH SPEED MOWER.
ID: 1/2"
OD: 1-1/8"
WIDTH: 2-1/4"
|
|
|
|
|
|
|
|
|
|
R3271- DRIVE SHAFT FOR LAWN-BOY
|
List Price: $48.53
Our Price: $7.99
You save $40.54!
|
|
|
REPL LAWN-BOY 683129
Engine to gear box drive shaft assembly for self propelled motors.
|
|
|
|
|
|
|
|
|
|
R8292- CONTROL ROD FOR BUNTON
|
List Price: $10.88
Our Price: $7.99
You save $2.89!
|
|
|
REPL BUNTON PLO346
Variable speed control rod,
fits 36", 48", 52" & 60" cut on older Bunton mowers.
Length 25"
|
|
|
|
|
|
|
|
|
|
R11513- ENGINE BRAKE CABLE FOR MTD
|
List Price: $11.09
Our Price: $7.99
You save $3.10!
|
|
|
REPL MTD 746-0554
Fits 1990-96 walk behind model series 300, 400 & 500.
Fits 1998 & up model series 070 & 100.
Fits 1990 & up propelled model series 300, 400 & 500.
Die cast "Z" bend on each end.
Conduit 40-1/2"
Inner wire 47"
|
|
|
|
|
|
|
|
|
|
R5803- HEX SHAFT FOR SNAPPER
|
List Price: $12.27
Our Price: $7.99
You save $4.28!
|
|
|
REPL SNAPPER 23744, 21745, 72284
For Snapper 21" self propelled walk behind mowers.
Length 8-1/4"
|
|
|
|
|
|
|
|
|
|
R8094 - Snapper 21129 Transmission Sprocket
|
List Price: $9.31
Our Price: $8.11
You save $1.20!
|
|
|
TRANSMISSION SPROCKET FITS ALL SNAPPER REAR ENGINE RIDERS.
USED WITH OUR 05-8095 TRANSMISSION GEAR.
|
|
|
|
|
|
|
|
|
|
R6863- REAR AXLE BUSHING (LEFT SIDE)
|
List Price: $10.36
Our Price: $8.25
You save $2.11!
|
|
|
Replaces; OREGON 45-107, PRIME LINE 7-04197, SNAPPER/KEES 5-0918, SNAPPER/KEES 7050918, STENS 225-987 & SUNBELT B1SN107.
ID 3/4", Top OD 1-3/4", Bottom OD 1-5/8", Top Height 1", Overall Height 1-3/4"
For 26" thru 33" rear engine riders.
|
|
|
|
|
|
|
|
|
|
At133-700 Ariens 3003 Drive Disc
|
List Price: $11.19
Our Price: $8.95
You save $2.24!
|
|
|
Replaces (OEM): ARIENS 00170800, 3003 & 00300300, CASE C22891, GILSON 18915 & 32222,
HOMELITE/JACOBSEN 158458 & 990152, JOHN DEERE AM122115, LAWN-BOY 741316, LESCO 050559,
MURRAY 35550, SNAPPER/KEES 1-0765 & 7010765 & 7018782, TROY BILT 1720859.
Fits ARIENS ST824DLE, ST928LE, ST1024, ST1028 & ST1132,
Fits TROY BILT 42010, 42012, 42033, 42034, 42036, 42039, 42040 & 42041 self-propelled mowers; 42051 & 42052 snowblowers.
Fits John Deere 828D, 924DE, 1032D, 1128DE, 1128DDE, 1332DDE Walk Behind Snowblowers.
Also fits Sears Rider made by Murray.
ID: 3"
OD: 6"
Drive disc has been ground to remove the center rib for improved performance and smoother operation.
|
|
|
|
|
|
|
|
|
|
R10122- 65" Blade Stop Cable Replaces Honda 54530-VA3-JO3
|
List Price: $11.12
Our Price: $8.99
You save $2.13!
|
|
|
Blade Stop Cable Replaces Honda 54530-VA3-JO3
Fits models HR215SXA,HXA, K1SXA, K1HXA, HRC215, K1SDKA,
HRC216HXA, SXA, K1HXA and K1SXA.
INNER WIRE: 65"
CONDUIT: 54"
WIRE TRAVEL: 9"
|
|
|
|
|
|
|
|
|
|
R10123- 54-3/4" Blade Stop Cable Replaces Honda 54530-VE0-003
|
List Price: $11.12
Our Price: $8.99
You save $2.13!
|
|
|
BLADE STOP CABLE REPLACES HONDA 54530-VEO-003.
FITS MODELS HRB215XA, HRB215K15XR,HRB215K2HXA.
CONDUIT: 45"
INNER WIRE: 54-3/4"
WIRE TRAVEL: 9-1/4"
|
|
|
|
|
|
|
|
|
|
R8568- TRANSMISSION CABLE FOR HONDA REPLACES 54510-VB5-800
|
List Price: $15.62
Our Price: $9.50
You save $6.12!
|
|
|
REPL 54510-VB5-800, code 2963627
Fits Honda 21" walk behind mowers, models HRA216 from 1988 to 1991.
HRC216 from 1992 to present with a 2 speed transmission.
Conduit length 44-3/4"
Wire length 49-7/8"
|
|
|
|
|
|
|
|
|
|
1101363MA-Genuine Murray Engine Stop Cable (44.25) Model 22 Series (2001-2004)
|
|
Our Price: $9.90
|
|
|
1101363MA-Genuine Murray Engine Stop Cable (44.25) Model 22 Series (2001-2004),1101363
|
|
|
|
|
|
|
|
|
|
R843- CLUTCH CABLE FOR MURRAY REPLACES MURRAY 42565 (75-1/2")
|
List Price: $11.98
Our Price: $10.25
You save $1.73!
|
|
|
REPLACES MURRAY 42565, PLP 129-500, PRIME LINE 7-04282, STENS 285-849, SUNBELT B1MU65.
USED TO STOP BLADE WHEN HANDLE IS RELEASED. OVERALL LENGTH: 78-1/2". CONDUIT 28-1/4".
|
|
|
|
|
|
|
|
|
|
R9757- BRAKE DRUM FOR GREAT DANE D48003/ ENCORE 363190/ SCAG 48209/ JACOBSEN JA18219-8
|
List Price: $18.41
Our Price: $10.35
You save $8.06!
|
|
|
REPL GREAT DANE D48003, Encore 363190,
Scag 48209 and Jacobsen JA18219-8.
Included in R9758 assembly.
ID 2-1/4"
OD 6"
Width 1-1/2"
|
|
|
|
|
|
|
|
|
|
R8764- STEERING CABLE FOR HUSKY
|
List Price: $12.61
Our Price: $10.99
You save $1.62!
|
|
|
REPL HUSKY 5065891-01
Overall length 42-1/2"
|
|
|
|
|
|
|
|
|
|
R9580- DRIVE SHAFT FOR EXMARK
|
List Price: $14.69
Our Price: $10.99
You save $3.70!
|
|
|
REPL EXMARK 1-323502 (9-SPLINE)
Fits 5 speed mowers , used with 9579 coupler with cover.
Length 6" Keyway 3/16"
|
|
|
|
|
|
|
|
|
|
R8833- 48" CLUTCH CABLE FOR MTD
|
List Price: $24.09
Our Price: $12.29
You save $11.80!
|
|
|
REPL MTD 746-0629
Fits all self propeeled walk behind mowers
with cog front wheels.
Total length 48"
Conduit Length 37"
|
|
|
|
|
|
|
|
|
|
R10120 - TRANSMISSION CABLE FOR HONDA 54520-VA3-PO3
|
List Price: $15.62
Our Price: $12.50
You save $3.12!
|
|
|
REPL HONDA 54520-VA3-PO3
Fits models HR1215HXA & HR215K1HXA
Conduit length: 42-1/2"
Inner wire: 47-1/2"
Wire travel: 3-3/4"
|
|
|
|
|
|
|
|
|
|
R7788- BRAKE BAND FOR BOBCAT
|
List Price: $13.68
Our Price: $12.65
You save $1.03!
|
|
|
REPL BOBCAT 138008
For 36",48",54" & 61" mid size mowers.
Width 3/4"
Diameter 6"
|
|
|
|
|
|
|
|
|
|
R8296- BRAKE DRUM FOR TORO
|
List Price: $16.98
Our Price: $12.99
You save $3.99!
|
|
|
REPL TORO 51-4180
Fits Proline Z models.
ID 2-5/16"
OD 5"
Center to center 2-3/4"
|
|
|
|
|
|
|
|
|
|
R11512- ENGINE BRAKE CABLE FOR MTD
|
List Price: $22.00
Our Price: $12.99
You save $9.01!
|
|
|
REPL MTD 746-0552
Fits 1985 & up walk-behind model series 030, 040, 050, 060,
070, 080, 090, 100, 200, 400 & 700. Also fits self-propelled model
series 200, 400 & 700.
Push in clip with heavy "Z" bend on each end.
Conduit 49"
Inner wire 53-1/2"
|
|
|
|
|
|
|
|
|
|
R10121- BLADE STOP CABLE FOR HONDA 54520-VB5-POOA
|
List Price: $15.62
Our Price: $12.99
You save $2.63!
|
|
|
REPL HONDA 54520-VB5-POOA
Fits models HRC216R1HXA & HR216HXA walk behind mowers.
Conduit: 42-3/4"
Inner wire: 47-5/8"
Wire travel: 3-1/2"
|
|
|
|
|
|
|
|
|
|
At133-709 MTD 05080A Drive Disc fits snowblower models 500, 510, 520 & 600
|
List Price: $25.66
Our Price: $12.99
You save $12.67!
|
|
|
Replaces OEM #: MTD 05080A & 05080AP.
Fits snowblower models 500, 510, 520 & 600
ID: 1-1/8"
OD: 6
|
|
|
|
|
|
|
|
|
|
R9124- 55-1/2" Brake Control Cable Replaces MTD 746-0552.
|
List Price: $22.00
Our Price: $13.00
You save $9.00!
|
|
|
PUSH-IN CLIPS WITH HEAVY "Z" BEND AT BOTH ENDS.
49" BLUE.
CONDUIT LENGTH: 50"
INNER WIRE LENGTH: 55-1/2"
WIRE TRAVEL: 5"
|
|
|
|
|
|
|
|
|
|
R9123- CLUTCH CABLE FOR MTD
|
List Price: $21.67
Our Price: $13.29
You save $8.38!
|
|
|
REPL MTD 746-0600
Speed cable, "Z" bend, 4-1/2" spring length.
Conduit 47-1/2"
Inner wire 54-1/2"
Wire travel 6-1/2"
|
|
|
|
|
|
|
|
|
|
R9126- CONTROL CABLE FOR LAWN-BOY
|
List Price: $28.46
Our Price: $13.99
You save $14.47!
|
|
|
REPL LAWN-BOY 682685
Fits 21" cut self propelled steel deck, rear discharge models.
Conduit 55-1/4"
Inner wire 64"
Wire travel 8"
|
|
|
|
|
|
|
|
|
|
R255 - 6-1/6" X 2" 40-T Sprocket for MTD 09054
|
List Price: $36.85
Our Price: $14.35
You save $22.50!
|
|
|
REPLACES OEM#: MTD 09054
SPROCKET FITS MTD.
CHAIN TYPE: NO. 41
ID: 2"
NO. OF TEETH: 40
OD: 6-1/2"
|
|
|
|
|
|
|
|
|
|
R10124- 65-1/2" Blade Stop Cable Replaces Honda 54530-VB3-802
|
List Price: $21.20
Our Price: $15.25
You save $5.95!
|
|
|
BLADE STOP CABLE REPLACES HONDA 54530-VB3-802.
FITS MODELS HR214SXA, HRA214SXA.
CONDUIT: 53"
INNER WIRE: 65-1/2"
WIRE TRAVEL: 10"
|
|
|
|
|
|
|
|
|
|
R8266- BRAKE BAND FOR EXMARK L/H
|
List Price: $23.17
Our Price: $15.49
You save $7.68!
|
|
|
REPL EXMARK 1-302036
Fits 32" and 48" variable and 5 speed decks, removable brake bands.
Used on our R8274 Brake assembly
|
|
|
|
|
|
|
|
|
|
R10119 - TRANSMISSION CABLE FOR HONDA 54520-VA3-801
|
|
Our Price: $15.62
|
|
|
REPL HONDA 54520-VA3-801
Fits model HR214 walk behind mower.
Conduit length 42-1/8"
Inner wire 44-3/4"
Wire travel 1-1/2"
|
|
|
|
|
|
|
|
|
|
|
1101365MA-Genuine Murray Engine Stop Cable (58.00) Model 22 Series (2001-2005)
|
|
Our Price: $15.85
|
|
|
1101365MA-Genuine Murray Engine Stop Cable (58.00) Model 22 Series (2001-2005), 1101365
|
|
|
|
|
|
|
|
|
|
At133-703 Ariens 02201300 Drive Disc also fits John Deere, Murray, Craftsman & Noma
|
List Price: $23.83
Our Price: $15.95
You save $7.88!
|
|
|
Replaces (OEM): ARIENS 03240700, 02201300, 03248300, 22013 & 2201300, AMF/DYNAMARK/NOMA 1325, 313883 & 53830, JOHN DEERE AM123355, MURRAY 1501435, 1501435MA.
Fits ARIENS 922003, 922006-922010, 922012-922022 Snowblowers.
Fits JOHN DEERE 524D, 724D and 826D Snowblowers
Fits many Murray & Craftsman Snowblowers
Fits NOMA 21" SELF PROPELLED MOWERS
ID: 2-1/4"
OD: 4-7/16"
|
|
|
|
|
|
|
|
|
|
R10689- DRIVE CONTROL ASSY FOR MURRAY REPLACES MURRAY 1101344,1101344MA (61")
|
List Price: $20.95
Our Price: $16.25
You save $4.70!
|
|
|
Conduit: 59"
Inner Wire: 61"
REPLACES MURRAY 1101344,1101344MA SILVER STREAK 60-029.
FITS SELF PROPELLED 22" WALKBEHIND MOWERS.
|
|
|
|
|
|
|
|
|
|
|
Genuine MTD 931-1449 Blade Fan
|
|
Our Price: $16.28
|
|
|
|
|
|
|
