Store Hours
MONDAY & FRIDAY
8:30am - 6:00pm

TUESDAY thru THURSDAY
8:30am - 4:30pm

SATURDAY
8:00am - 2:00pm

SUNDAY - CLOSED

Store Location
30 Cottage Street
Milford, NH 03055
603-673-4948






(Your shopping cart is empty)
You are here: Home > Mini Bike & Go-Kart Parts
We found 86 results matching your criteria.
Choose a sub category:
Clutches, Torq-A-Verters & Accessories
Brake & Throttle Parts
Sprockets, Bushings, Clutch Springs & Key Stock
Stop/Kill Switches
Sort By:
Page of 1
R5600 Straight Key Stock 3/16" -  12" Length
R5600 Straight Key Stock 3/16" - 12" Length
List Price: $1.86
Our Price: $1.75
You save $0.11!

KEY STOCK. 3/16" -  12" LENGTH. GREEN
LENGTH:  12"
WIDTH:  3/16"
R31 PIN HITCH ASSEMBLY 2 1/4" X 1/2"
R31 PIN HITCH ASSEMBLY 2 1/4" X 1/2"
List Price: $3.15
Our Price: $2.00
You save $1.15!

Size: 2-1/4" X 1/2"
R5601 Straight Key Stock 1/4" - 12" Length
R5601 Straight Key Stock 1/4" - 12" Length
List Price: $3.59
Our Price: $2.50
You save $1.09!

KEY STOCK 1/4" - 12" LENGTH. BLUE
LENGTH:  12"
WIDTH:  1/4"
R467 - 5/8" Lock Collar With Set Screws
R467 - 5/8" Lock Collar With Set Screws
Our Price: $2.75

Replaces MTD 711-0169.
5/8" ID, 1/2" Height. Heavy Duty.
R468 - 3/4" Lock Collar With Set Screws
R468 - 3/4" Lock Collar With Set Screws
Our Price: $2.75

3/4" ID, 9/16" Height. Heavy Duty.
HEIGHT:  9/16"
R5602 Straight Key Stock 5/16" -  12" Length
R5602 Straight Key Stock 5/16" - 12" Length
List Price: $4.53
Our Price: $2.75
You save $1.78!

KEY STOCK. 5/16" -  12" LENGTH. RED
LENGTH:  12"
WIDTH:  5/16"
R5603 Straight Key Stock 3/8" -  12" Length
R5603 Straight Key Stock 3/8" - 12" Length
List Price: $3.85
Our Price: $2.95
You save $0.90!

KEY STOCK. 3/8" -  12" LENGTH. YELLOW
LENGTH:  12"
WIDTH:  3/8"
S260-166 Throttle Cable
S260-166 - 56" Throttle Cable
List Price: $3.40
Our Price: $3.00
You save $0.40!

56" inner cable.
48" outer casing.
Ball and barrel ends.
R2946 Uiversal Style Kill Switch with 48" lead wire for go-carts & ATV's fits 7/8" & 1" frames
R2946 Uiversal Style Kill Switch with 48" lead wire for go-carts & ATV's fits 7/8" & 1" frames
List Price: $4.20
Our Price: $3.25
You save $0.95!

Universal style kill switch with a 48" lead wire.
Used on go-carts, ATV's, etc.
Mounts on 7/8" and 1" diameter frames
Includes switch, mount and lead
R465  Bronze Bushing for 3/4" Clutch
R465 Bronze Bushing for 3/4" Clutch
List Price: $4.35
Our Price: $3.25
You save $1.10!

ID:  7/8"
OD:  1"
S260-170 Throttle Cable
S260-170 - 60" Throttle Cable
List Price: $4.47
Our Price: $3.50
You save $0.97!

60" inner cable.
55" outer casing.
Ball and barrel ends.
490 Flat-end replacement pucks
R490 Flat-end replacement pucks
Our Price: $3.99

FLAT-END  REPLACEMENT PUCKS. USED ON OUR NO. 488 Brake Disc Caliper Assembly.
THESE PUCKS ARE THE REPLACEMENTS FOR THE MOST POPULAR DISC BRAKES.  SOLD ONLY IN PAIRS.
MG260-174 - 65" THROTTLE CABLE
S260-174 - 65" THROTTLE CABLE
List Price: $4.74
Our Price: $3.99
You save $0.75!

65" inner cable.
60" outer casing.
Ball and barrel ends.
R7728 Deluxe Toggle Type Kill Switch with 48" lead wire for go-karts and ATV's fits 3/4" & 7/8" Frames
R7728 Deluxe Toggle Type Kill Switch with 48" lead wire for go-karts and ATV's fits 3/4" & 7/8" Frames
List Price: $6.46
Our Price: $4.99
You save $1.47!

Deluxe toggle type kill switch with a 48" lead wire.
Used on go-karts and ATV's.
Fits 3/4" & 7/8" Frames.
Comes with 7/8" Bracket.
S260-125 Go Cart Brake Pads
S260-125 Go Cart Brake Pads
List Price: $7.44
Our Price: $5.00
You save $2.44!

Fits go-carts.
Large pads 1 1/16"
OD x 1/2" THK.
Small pads 1 1/16"
OD x 9/32" THK.
(PRICED PER PAIR, SOLD PER PAIR)
S260-216 - 60" Heavy-duty Universal Brake Cable
S260-216 - 60" Heavy-duty Universal Brake Cable
List Price: $5.53
Our Price: $5.25
You save $0.28!

60" inner cable.
55" outer casing.
Heavy-duty universal cable.
Barrel on one end.
R8944 Deluxe Toggle Type Kill Switch with 48" lead wire for go-karts & ATV's, fits 1" frame
R8944 Deluxe Toggle Type Kill Switch with 48" lead wire for go-karts & ATV's, fits 1" frame
List Price: $6.45
Our Price: $5.75
You save $0.70!

Deluxe toggle type kill switch with a 48" lead wire.
Used on go-karts & ATV's.
Fits 1" frame.
Comes with 1" Bracket.
R8489 - Zerk / Bolt Assembly
R8489 - Zerk / Bolt Assembly
List Price: $7.95
Our Price: $6.50
You save $1.45!

Zerk / Bolt assembly fits our R7680 & R7681 clutch.
R10985 3/4" Bore Drive Sprocket 41 CHAIN, 10 TOOTH, 3/16" KEYWAY
R10985 - 3/4" Bore Drive Sprocket 41 CHAIN, 10 TOOTH, 3/16" KEYWAY
List Price: $7.89
Our Price: $6.99
You save $0.90!

BORE:  3/4"
CHAIN TYPE:  NO. 41
KEYWAY:  3/16"
NO. OF TEETH:  10
COMES WITH KEY & SET SCREWS.
S260-141 Brake Drum Fits Bristers (Thunder Karts), Hamilton Bros. (Lightning), K-C Mfg. and Ken Bar
S260-141 Brake Drum Fits Bristers (Thunder Karts), Hamilton Bros. (Lightning), K-C Mfg. and Ken Bar
List Price: $9.14
Our Price: $7.25
You save $1.89!

Fits Bristers (Thunder Karts), Hamilton Bros. (Lightning), K-C Mfg. and Ken Bar
Four 5/16" holes on 2 13/16" circle
Four 3/8" holes on 2 7/8" circle
4 1/4" OD x 1" HT
U.S. Made
MG430-500 Universal style kill switch with 36" lead wire
MG430-500 Universal style kill switch with 36" lead wire
List Price: $9.41
Our Price: $7.99
You save $1.42!

Universal style kill switch with a 36" lead wire.
Mounts on 7/8" and 1" diameter frames.
Includes switch, mount and lead.
S215-111 Bearing Race
S215-111 Bearing Race
List Price: $8.72
Our Price: $7.99
You save $0.73!

Replaces (OEM): ARIENS 05407000
CUSHMAN 814474
DIXIE CHOPPER 10206
EZ-GO 51141-81
GILSON 1046
JOHN DEERE JD8253
LAWN-BOY 254-72
LAWN-BOY 703809
SCAG 48005-04
SCAG 481895
TAYLOR-DUNN 80-103-00
TORO 254-72
UNIVERSAL L44610
WOODS 003585

Fits Models: JOHN DEERE 303, 305 and 1500
SCAG New style spindles
TAYLOR-DUNN New style spindles
TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D  
REF. NO.: L44610
OD: 1.980"
Height: 0.420"  
 Fits our S215-103 Roller Bearing
S260-182 Throttle Cable
S260-182 - 100" Throttle Cable
List Price: $8.61
Our Price: $8.25
You save $0.36!

100" inner cable.
90" outer casing.
Ball and barrel ends.
S260-208 - 56" Brake Cable for Fox and Rupp rear wheel
S260-208 - 56" Brake Cable for Fox and Rupp rear wheel
List Price: $10.30
Our Price: $9.25
You save $1.05!

Fits Fox and Rupp rear wheel.
56" inner cable.
51 1/4" outer casing.
Comes with U-clamp and spring.
MG475 Drive Sprocket 41 Chain 9T 5/8" Bore
MG475 Drive Sprocket 41 Chain 9T 5/8" Bore
List Price: $11.88
Our Price: $10.25
You save $1.63!

9 tooth for 41 chain. 5/8" bore, complete with set screw. 3/16" keyway.
S260-190 34" Brake Cable for Fox and Rupp front wheel
S260-190 34" Brake Cable for Fox and Rupp front wheel
List Price: $11.58
Our Price: $10.25
You save $1.33!

Fits Fox and Rupp front wheel.
34" inner cable.
30" outer casing.
Comes with U-clamp and spring.
R472  Drive Sprocket 35 Chain 12T 5/8" Bore
R472 Drive Sprocket 35 Chain 12T 5/8" Bore
List Price: $13.26
Our Price: $10.25
You save $3.01!

COMPLETE WITH SET SCREW
BORE:  5/8"
CHAIN TYPE:  NO. 35
NO. OF TEETH:  12
MG476 Drive Sprocket 41 Chain 10T 5/8" Bore
MG476 Drive Sprocket 41 Chain 10T 5/8" Bore
List Price: $12.34
Our Price: $11.25
You save $1.09!

COMPLETE WITH SET SCREW.
Bore: 5/8"  
Teeth: 10
Chain Number: 41
MG473 Drive Sprocket 35 Chain 14T 5/8" Bore
MG473 - Drive Sprocket 35 Chain 14T 5/8" Bore
List Price: $11.88
Our Price: $11.25
You save $0.63!

complete with set screw.
BORE:  5/8"
CHAIN TYPE:  NO. 35
NO. OF TEETH:  14
MG474 Drive Sprocket 35 Chain 16T 5/8" Bore
MG474 Drive Sprocket 35 Chain 16T 5/8" Bore
List Price: $12.90
Our Price: $11.25
You save $1.65!

16 tooth for 35 chain. 5/8" bore, complete with set screw. 3/16" keyway.
S260-549 - 54 1/8" Throttle Cable
S260-549 - 54 1/8" Throttle Cable
List Price: $14.87
Our Price: $11.25
You save $3.62!

54 1/8" inner cable.
50" outer casing.
Barrel end on one end.
Includes cable and hardware.
10191 Replacement pucks
R10191 Replacement Pucks
Our Price: $11.50

REPLACEMENT BRAKE PUCKS.  
1.3" HEIGHT, 1.6" WIDTH, .350" THICKNESS.  
SOLD ONLY IN PAIRS.
R480 - Jackshaft 12" X 5/8" - 3/16" Key
R480 - Jackshaft 12" X 5/8" - 3/16" Key
List Price: $21.00
Our Price: $12.99
You save $8.01!

12" long.
DIAMETER:  5/8"
KEYWAY:  3/16"
LENGTH:  12"
R469 Steel Plate Sprocket C35 60T 7-1/4" OD
R469 Steel Plate Sprocket C35 60T 7-1/4" OD
List Price: $15.75
Our Price: $13.25
You save $2.50!

This sprocket is made of heavy gauge steel for long lasting life. To be used on 35 chain with 2" center hole and has popular four bolt hole Indus pattern with mounting holes 2" apart. 2-7/8" bolt circle.
C. H. DIA:  2"
CHAIN TYPE:  NO. 35
MOUNTING HOLES:  2" APART
NO. OF TEETH:  60
OD:  7-1/4"
R471 Steel Plate Sprocket C35 66T 8" OD
R471 - Steel Plate Sprocket C35 66T 8" OD
List Price: $21.95
Our Price: $13.75
You save $8.20!

This sprocket is made of heavy gauge steel for long lasting life. To be used on 35 chain with 2" center hole and has popular four bolt hole Indus pattern with mounting holes 2" apart. 2-7/8" bolt circle.
C. H. DIA:  2"
CHAIN TYPE:  NO. 35
MOUNTING HOLES:  2" APART
NO. OF TEETH:  66
OD:  8"
S215-103 Roller Bearing
S215-103 Roller Bearing
List Price: $15.62
Our Price: $13.75
You save $1.87!

Replaces (OEM): ARIENS 05406900
CUSHMAN 814473
DIXIE CHOPPER 10207
EZ-GO 11750G2
FERRIS 20884
FERRIS 5020884
GILSON 1045
GRASSHOPPER 122552
JOHN DEERE JD8933
LAWN-BOY 254-94
LAWN-BOY 703210
SCAG 48005-05
SCAG 481896
SIMPLICITY 170835
SIMPLICITY 2170835
TAYLOR-DUNN 80-103-00
TORO 254-94
UNIVERSAL L44643

Fits Models: EZ-GO Front wheel bearing for carts with 1" spindle
FERRIS Front wheel bearing for carts with 1" spindle
GRASSHOPPER Front wheel bearing for carts with 1" spindle
JOHN DEERE 46"-50" snowthrowers; 51" rotary brooms; 303,305, 550 and 1500 tillers
SCAG New style spindles
TORO Reelmaster 223D and 5100D and Greensmaster 3,300, 3000 and 3100  
REF. NO.: L44643
ID: 1.000"  
Height: 0.579"  
 Tapered
 Fits our S215-111 Bearing Race
R9484 Steel Plate Sprocket
R9484 Steel Plate Sprocket
List Price: $16.00
Our Price: $14.25
You save $1.75!

Steel plate sprocket for 35 chain. 60 Tooth, 7-1/4" OD, 1-3/8" ID. 2-7/8" to 3-1/4" bolt circle.
R470 Steel Plate Sprocket C35 72T 8-3/4" OD
R470 Steel Plate Sprocket C35 72T 8-3/4" OD
List Price: $17.95
Our Price: $14.50
You save $3.45!

This sprocket is made of heavy gauge steel for long lasting life. To be used on 35 chain with 2" center hole and has popular four bolt hole Indus pattern with mounting holes 2" apart. 2-7/8" bolt circle.
C. H. DIA:  2"
CHAIN TYPE:  NO. 35
MOUNTING HOLES:  2" APART
NO. OF TEETH:  72
OD:  8-3/4"
Panavise 72704 Slimline Phone Mount 4" Rise Knob & Set Screw Adjustment
Panavise 72704 Slimline Phone Mount 4" Rise Knob & Set Screw Adjustment
Our Price: $14.50

Panavise Pedestal Mount 4 inch Slim-line 727-04 enhances the convenience of a cell phone hands free device by giving your car kits cradles & holders a secure place to rest!
Panavise Slim-line Mount with Large Thumb Knob means this 4 inch pedestal can easily be adjusted by hand yet maintains its position!
Panavise 727-04 Pedestal Mount also positions the car kits cradles & holders to face directly at the driver for easier visibility!
R8487 Torq-A-Verter Replacement Belt
R8487 Torq-A-Verter Replacement Belt
List Price: $24.15
Our Price: $16.75
You save $7.40!

Comet 203589A
Manco 5959.
3/4" W x 27 3/8" L
Cogged Belt.
R9485 Steel Plate Sprocket
R9485 Steel Plate Sprocket
List Price: $19.90
Our Price: $16.75
You save $3.15!

Steel plate sprocket for 35 chain. 72 Tooth, 8-3/4" OD, 1-3/8" ID. 2-7/8" to 3-1/4" bolt circle.
R8247 Steel Plate Sprocket
R8247 Steel Plate Sprocket
List Price: $19.00
Our Price: $16.99
You save $2.01!

48 tooth, 41 chain Indus pattern (2-7/8" bolt circle) and universal mounting holes 5/16" and 3/8".
10312 Brake Band for Brothers Go Karts
R10312 Brake Band for Brothers Go Karts
Our Price: $17.75

10312 Brake Band for Brothers Go Karts
BRAKE BAND FITS 4 3/4" DIAMETER BRAKE DRUMS ON CARTER BROTHERS GO KARTS.
R8248 Steel Plate Sprocket
R8248 Steel Plate Sprocket
List Price: $24.50
Our Price: $20.00
You save $4.50!

54 tooth, 41 chain Indus pattern (2-7/8" bolt circle) and universal mounting holes 5/16" and 3/8".
S260-232 Twist Grip Set for 1" handle
S260-232 Twist Grip Set for 1" handle
List Price: $34.60
Our Price: $20.50
You save $14.10!

Fits 1" handle.
Deluxe throttle assembly with dummy grip.
Uses barrel or ball typecable ends.
(PRICED PER PAIR, SOLD PER PAIR)
S260-240 Right Side Only Brake Lever for 7/8" handle
S260-240 Right Side Only Brake Lever for 7/8" handle
List Price: $27.11
Our Price: $20.50
You save $6.61!

Right side only.
Fits 7/8" handle.
Uses barrel or ball type cable ends.
Includes cable adjuster.
Used only for right hand side
P021005810 Echo clutch shoe set
P021005810 Echo clutch shoe set
Our Price: $20.50

P021005810 Echo clutch shoe set
R8249 Steel Plate Sprocket
R8249 Steel Plate Sprocket
List Price: $24.50
Our Price: $21.25
You save $3.25!

60 tooth, 41 chain Indus pattern (2-7/8" bolt circle) and universal mounting holes 5/16" and 3/8". 2-1/8" center hole.
S260-133 Brake Band Replaces Manco 1492
S260-133 Brake Band Replaces Manco 1492
List Price: $32.27
Our Price: $22.50
You save $9.77!

Manco 1492.
7/8" HT.
Fits our S260-141 brake drum.
Fits 4 3/16" OD drum.
Includes pin.
R12462 Torque Converter Belt Replaces Murray 37X125
R12462 Torque Converter Belt Replaces Murray 37X125
List Price: $34.95
Our Price: $22.99
You save $11.96!

Torque converter belt for Go-Karts. Replaces Murray 37X125.
Aramid cord construction.
LENGTH:  34-37/64"
WIDTH:  11/16"
S260-109 Manco 3759 Disc Brake Assembly for riding mowers, mini bikes and go-carts
S260-109 Manco 3759 Disc Brake Assembly for riding mowers, mini bikes and go-carts
List Price: $34.00
Our Price: $26.50
You save $7.50!

Manco 3759
Used on riding mowers, mini bikes and go-carts.
Uses our MB260-125 replacement brake pads.
488 Disc Brake Assembly Caliper
R488 Disc Brake Assembly Caliper
Our Price: $28.50

488 Disc Brake Assembly Caliper
Uses our #490 pucks
12390 Jensen OEM-HP1 Fully Padded Deluxe Headphones
R12390 Genuine Jensen/Audiovox OEM-HP1 Fully Padded Deluxe Headphones
List Price: $38.00
Our Price: $32.00
You save $6.00!

Flexible coiled Cord with 1/4" phone plug
Adjustable left-right level controls
Adjustable headband
12388 Jensen Heavy-Duty 1181039 Top/Side Mount Rubber ast Antenna with Cable
R12388 Genuine Jensen Heavy-Duty 1181039 Top Side Mount Rubber Antenna with Cable
List Price: $44.00
Our Price: $35.00
You save $9.00!

Approx 14" Length
Rubber gasket allows water tight seal
Angle adjustjment up to 90 degrees
Attached 59" cable
For universal use or as replacement
R455 - 35 Chain 3/4" Bore Max Torque Clutch
R455 - 35 Chain 3/4" Bore Max Torque Clutch
List Price: $45.50
Our Price: $37.75
You save $7.75!

3/4" Bore, 35 Chain, 12 teeth. Comes complete with set screws.
3/16" x 3/16" x 5/8" long keyway
BORE:  3/4"
CHAIN TYPE:  NO.35
NO. OF TEETH:  12
R456 - 35 Chain 5/8" Bore Max Torque Clutch
R456 - 35 Chain 5/8" Bore Max Torque Clutch
List Price: $45.50
Our Price: $37.75
You save $7.75!

5/8" Bore, 35 Chain, 11 teeth. Comes complete with set screws.
3/16" x 3/16" x 5/8" long keyway.
BORE:  5/8"
CHAIN:  #35
NO. OF TEETH:  11
R457 - 41 Chain 3/4" Bore Max Torque Clutch
R457 - 41 Chain 3/4" Bore Max Torque Clutch
List Price: $45.50
Our Price: $37.75
You save $7.75!

3/4" Bore, 41 Chain, 10 teeth. Comes complete with set screws.
3/16" x 3/16" x 5/8" long keyway.
BORE:  3/4"
CHAIN TYPE:  NO. 41
NO. OF TEETH:  10
R458 - 41 Chain 5/8" Bore Max Torque Clutch
R458 - 41 Chain 5/8" Bore Max Torque Clutch
List Price: $45.50
Our Price: $37.75
You save $7.75!

5/8" Bore, 41 Chain, 10 teeth. Comes complete with set screws.
3/16" x 3/16" x 5/8" long keyway.
BORE:  5/8"
CHAIN TYPE:  NO.41
NO. OF TEETH:  10
84-029 - Max Torque # TCBLTL Cogged Belt
84-029 - Max Torque # TCBLTL Cogged Belt
List Price: $49.56
Our Price: $39.00
You save $10.56!

3/4" W x 29-21/32" L
Torque Converter belt for Max Torque converters, long version
84-028 - Max Torque # TCBLT Cogged Belt
84-028 - Max Torque # TCBLT Cogged Belt
List Price: $50.28
Our Price: $39.00
You save $11.28!

Max Torque TCBLT
Torque Converter belt for Max Torque converters.
3/4" x 29-9/32"
255-125 MAXTORQUE SPROCKET CLUTCH 3/4" BORE 35 CHAIN
S255-125 MAXTORQUE SPROCKET CLUTCH 3/4" BORE 35 CHAIN
List Price: $57.65
Our Price: $41.99
You save $15.66!

Bore:3/4"
Teeth:12
Keyway:3/16"
Chain Number:35
Sintered metal shoes
Stainless steel garter spring
Weldless construction
Oilite bushing
No adjustment required
Non-directional (inboard or outboard)
Each clutch includes an instruction sheet explaining proper installation methods and maintenance
Use with our 250-001 Roller Chain #35
U.S. Made
255-133 MAXTORQUE SPROCKET CLUTCH 3/4" BORE 41 CHAIN
S255-133 MAXTORQUE SPROCKET CLUTCH 3/4" BORE 41 CHAIN
List Price: $57.65
Our Price: $41.99
You save $15.66!

Bore: 3/4 "
Chain Number: 41
Keyway: 3/16 "
Teeth: 10
Sintered metal shoes
Stainless steel garter spring
Weldless construction
Oilite bushing
No adjustment required
Non-directional (inboard or outboard)
Each clutch includes an instruction sheet explaining proper installation methods and maintenance
255-117 MAXTORQUE SPROCKET CLUTCH 5/8" BORE 41 CHAIN
S255-117 MAXTORQUE SPROCKET CLUTCH 5/8" BORE 41 CHAIN
List Price: $57.65
Our Price: $46.99
You save $10.66!

Bore: 5/8 "
Chain Number: 41
Keyway: 3/16 "
Teeth: 10
Sintered metal shoes
Stainless steel garter spring
Weldless construction
Oilite bushing
No adjustment required
Non-directional (inboard or outboard)
Each clutch includes an instruction sheet explaining proper installation methods and maintenance
255-042 Comet Sprocket Clutch 3/4" Bore, 10 Teeth, 40/41 Chain
S255-042 Comet Sprocket Clutch 3/4" Bore, 10 Teeth, 40/41 Chain
List Price: $71.89
Our Price: $50.99
You save $20.90!

Replaces OEM: HOFFCO/COMET: 209768
Bore: 3/4 "
Chain Number: 40/41
Keyway: 3/16 "
Teeth: 10
R7680 - Max Clutch Lube System
R7680 - Max Clutch Lube System
List Price: $69.00
Our Price: $51.99
You save $17.01!

Max Clutch Lube System
3/4" Bore, 35 Chain & 12 Teeth
BORE:  3/4"
CHAIN TYPE:  NO. 35
NO. OF TEETH:  12
R7681 - Max Clutch Lube System
R7681 - Max Clutch Lube System
List Price: $69.00
Our Price: $51.99
You save $17.01!

BORE:  3/4"
CHAIN TYPE:  NO. 41
NO. OF TEETH:  10
255-018 Comet Sprocket Clutch, 3/4" Bore, 12 Teeth, 35 Chain
S255-018 Comet Sprocket Clutch, 3/4" Bore, 12 Teeth, 35 Chain
List Price: $72.83
Our Price: $52.00
You save $20.83!

Replaces OEM: HOFFCO/COMET: 209760
Bore: 3/4 "
Chain Number: 35
Keyway: 3/16 "
Teeth: 12
R10389 HILLIARD'S EXTREME DUTY GO KART CLUTCH
R10389 HILLIARD'S EXTREME DUTY GO KART CLUTCH
List Price: $79.95
Our Price: $56.99
You save $22.96!

ID:3/4"
OD:4 3/16"
Height:2 9/32" HT
Teeth:12
Chain Number:35
High performance
Thermodynamic design absorbs heat without damaging springs
Includes retaining ring and set screw
Maximum 13 HP rating
Uses our 255-228 Hilliard Sprocket Bushing
Use with our 250-001 Roller Chain #35
U.S. Made
R10390 HILLIARD'S EXTREME DUTY GO KART CLUTCH
R10390 HILLIARD'S EXTREME DUTY GO KART CLUTCH
List Price: $79.95
Our Price: $56.99
You save $22.96!

Chain Number: 40/41 & 410 chain
ID: 3/4 "
Teeth: 10
72-807 - Wheel and Hub Assembly for Go-Karts
72-807 Wheel and Hub Assembly for Go-Karts
Our Price: $57.25

Height: 4.5 inches
R864 - 3/4" Belt Drive Clutch Max-Torque
R864 - 3/4" Belt Drive Clutch Max-Torque
List Price: $79.50
Our Price: $58.99
You save $20.51!

Bore 3/4", For either A or B section belt. Pulley is 3.20" OD.
3/16" x 3/16" x 5/8" long keyway.
R865 - 5/8" Belt Drive Clutch Max-Torque
R865 - 5/8" Belt Drive Clutch Max-Torque
List Price: $79.50
Our Price: $58.99
You save $20.51!

Bore 5/8", For either A or B section belt. Pulley is 3.20" OD.
3/16" x 3/16" x 5/8" long keyway.
255-224 Hilliard Sprocket Clutch  .750" BORE 35 clutch
S255-224 Hilliard Sprocket Clutch .750" BORE 35 clutch
List Price: $89.16
Our Price: $59.00
You save $30.16!

Replaces OEM: HILLIARD: LD4-S-5L
Chain Number: 35
Height: 2 9/32 "
ID: 3/4 "
OD: 4 3/16 "
Teeth: 12
High performance
Thermodynamic design absorbs heat without damaging springs
Includes retaining ring and set screw
Maximum 13 HP rating
255-220 HILLIARD SPROCKET CLUTCH .750" BORE 40/41 chain
S255-220 HILLIARD SPROCKET CLUTCH .750" BORE 40/41 chain
List Price: $89.16
Our Price: $59.99
You save $29.17!

Replaces OEM: HILLIARD: LD4S-4L
Chain Number: 40/41 chain
Height: 2 9/32 "
ID: 3/4 "
OD: 4 3/16 "
Teeth: 10
High performance
Thermodynamic design absorbs heat without damaging springs
Includes retaining ring
Maximum 13 HP rating
R13988 - Max-Torque Converter Driver Unit Replaces Comet 219559
R13988 - Max-Torque Converter Driver Unit Replaces Comet 219559
List Price: $138.95
Our Price: $81.99
You save $56.96!

Replaces OEM: COMET 219559, MAX TORQUE  20-12, MAX TORQUE  TCDRS34
Symmetrical,
3/4"  Shaft
5"  diameter
Includes a 24 x 1-3/4"  bolt, lock washer and flat washer.
Uses 11/16' wide belt
12387 Jensen JXHD35 Heavy Duty 3.5" Mini Weatherproof Speakers
R12387 Genuine Jensen JXHD35 Heavy Duty 3.5" Mini Weatherproof Speakers
List Price: $99.50
Our Price: $87.95
You save $11.55!

Included in Kit

Maximize your audio quality with the JENSEN® JXHD35 Mini Speakers.
By offering full range audio reproduction, easy mounting options, and UV resistance, the JXHD35 Mini Speakers bring further audio enjoyment to the JHD910
Ideally paired to the new JHD910 mini weatherproof radio
Includes two deluxe mini wedge speakers
Can be surface mounted, flush mounted or mounted using included adjustable "u" bracket
30 Watts input
Fully weatherproof for exposed outdoor mounting
Includes wiring and hardware
Sold As A Pair (2)
R13989 - Max-Torque Converter Driven Unit Replaces 215654, 217775A, 219462
R13989 - Max-Torque Converter Driven Unit Replaces 215654, 217775A, 219462
List Price: $142.24
Our Price: $87.99
You save $54.25!

Replaces OEM: COMET 215654, COMET 217775A, COMET 219462, MAX TORQUE 21-12-0003, MAX TORQUE  TCDNS34-OUT
Symmetrical, 3/4"  Shaft, 7"  diameter. Includes a 2.7" key.
OUTBOARD MOUNT
Fits Yerfdog, Brister Thunder Karts, USA Industries, Bob's Kart Shop (BKS) all are Outboard driven which needed to float on the jackshaft to stay aligned with the driver.
Uses 11/16" wide belt
R13990 - Max-Torque Converter Driven Unit Replaces 215654, 217775A, 219462
R13990 - Max-Torque Converter Driven Unit Replaces 215654, 217775A, 219462
List Price: $142.24
Our Price: $87.99
You save $54.25!

Replaces OEM: COMET 215654, COMET 217775A, COMET 219462, MAX TORQUE 21-12-0002, MAX TORQUE  TCDNS34-IN
Symmetrical, 3/4"  Shaft, 7"  diameter. Includes a 2.7" key.
INBOARD MOUNT
Fits Carter Brothers and Brister Design, Similar to Comets series 20,
Uses 11/16" wide belt
R8708 - Comet Complete Clutch Assembly 1" Bore, 35 Chain, 12 teeth.
R8708 - Comet Complete Clutch Assembly 1" Bore, 35 Chain, 12 teeth.
List Price: $113.99
Our Price: $89.99
You save $24.00!

Complete assembly rated up to 8 HP
Bore:  1"
Chain Type:  No. 35
No of Teeth:  12
Balanced for smooth, chatter free operation
R12392 Jensen Roll Over Protection System Radio Universal Installation Kit for JHD910
R12392 Genuine Jensen Roll Over Protection System Radio Universal Installation Kit for JHD910
List Price: $130.00
Our Price: $96.99
You save $33.01!

Includes clamp-on brackets that attach to ROPS Bar (no drilling)
Bracket mounts radio (JHD910) and speakers (JXHD35) and antenna (1181039)
Matching bracket for opposite side mounts 2nd speaker
Includes wiring harness and all hardware and instructions
255-715 Noram 40028 Heavy Duty Pulley Clutch
S255-715 Noram 40028 Heavy Duty Pulley Clutch
List Price: $243.09
Our Price: $135.00
You save $108.09!

Replaces OEM: NORAM: 40028
Fits A or B belts
For 5 HP compactors
3/4" bore
Ball bearing
For 5 HP rating
3/16" keyway, 5 3/8" OD pulley
One piece steel pulley and drum, heavy-duty
255-635 Noram 160021 Heavy Duty Pulley Clutch
S255-635 Noram 160021 Heavy Duty Pulley Clutch
List Price: $311.14
Our Price: $170.00
You save $141.14!

Replaces OEM: MACKISSIC: 030-0164
NORAM: 160021
TROY BILT: 1762055
Fits A or B belts
For 1/2" or 5/8" section belts
1" bore ball bearing style hub for smooth running
For 3 thru 10 HP rating
1/4" keyway, 4" OD pulley
One piece machined steel pulley and drum to withstand high shock loading, heavy-duty
Upgrade from the original
12386 Jensen JHD910 Heavy-Duty Waterproof Mini AM/FM/WB Stereo with Audio Aux-in
R12386 Genuine Jensen JHD910 Heavy-Duty Waterproof Mini AM/FM/WB Stereo With Audio Aux-In
List Price: $279.00
Our Price: $235.00
You save $44.00!

FREE SHIPPING!

Front panel audio aux-in for use with iPods, MP3 players, and portable CD players

Electronic US/Euro AM/FM Tuner
12VDC Power – no batteries required
2 Wire Power Connection allows unit to maintain station presets. Clock will run up to 30 days when vehicle battery is disconnected
Completely waterproof; locks out water, dirt, and grime. Unit will withstand even the harshest weather conditions
7-Channel NOAA weatherband tuner
Weather Alert automatically switches to WB mode when NOAA warning broadcast is received.
Corrosion and UV-resistant faceplate
Programmable station presets (12AM/18FM)
Built-in Jobsite Work Timer
Electronic Seek up-down / Volume / Bass / Treble & Balance Controls
12/24 hour clock
Backlit controls with selectable amber or green illumination color
Daylight readable display with wide viewing angle
1/4" Headphone jack pigtail & 2-Channel Stereo Speaker Output
Universal mounting provisions
2-Channel amplified audio output (15W)
One-touch Audio Mute
E-mark certified
Chassis Size: 5-3/16" W x 3-3/8" H x 1-7/8" D

Package Includes:
JHD910 Radio
Radio Mounting Bracket
Headphone Mounting Bracket
Five (5) 10-16 x 3/4" Stainless Steel PPH Screws
Five (5) 10-32 x 5/8" Stainless Steel PPH Screws
Five (5) 10-32 Stainless Steel Hex Nuts
Five (5) 10 #10 Stainless Steel Washers
Four (4) M4 x .7 x 8MM Stainless Steel Hex Screws with Captivated Washers
Wiring Harness
Auxiliary Input Patch Cord
Owner's Manual
10003 Genuine Jensen Radio & Antenna Kit for JHD910
R10003 Genuine Jensen Radio & Antenna Kit for JHD910
List Price: $315.00
Our Price: $250.00
You save $65.00!

FREE SHIPPING!

Kits includes our Jensen products:

12386 Jensen JHD910 Heavy-Duty Waterproof Mini AM/FM/WB Stereo with Audio Aux-in
12388 Jensen Heavy-Duty 1181039 Top/Side Mount Rubber ast Antenna with Cable
R10002 Genuine Jensen Radio, Speaker & Antenna Kit for JHD910
R10002 Genuine Jensen Radio, Speaker & Antenna Kit for JHD910
List Price: $405.00
Our Price: $325.00
You save $80.00!

FREE SHIPPING!

Kits includes our Jensen products:
R12386 Jensen JHD910 Heavy-Duty Waterproof Mini AM/FM/WB Stereo with Audio Aux-in
R12387 Jensen JXHD35 Heavy Duty 3.5" Mini Weatherproof Speakers
R12388 Jensen Heavy-Duty 1181039 Top/Side Mount Rubber ast Antenna with Cable
10001 Genuine Jensen Radio, Headphones, Speaker & Antenna Kit for JHD910
R10001 Genuine Jensen Radio, Headphones, Speaker & Antenna Kit for JHD910
List Price: $446.50
Our Price: $350.00
You save $96.50!

FREE SHIPPING!

Kits includes our Jensen products:

R12386 Jensen JHD910 Heavy-Duty Waterproof Mini AM/FM/WB Stereo with Audio Aux-in
R12387 Jensen JXHD35 Heavy Duty 3.5" Mini Weatherproof Speakers
R12388 Jensen Heavy-Duty 1181039 Top/Side Mount Rubber ast Antenna with Cable
R12390 Jensen OEM-HP1 Fully Padded Delux Headphones
   
 
www.milfordpower.com

 Contact Us
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2007 Milford Power Equipment. All Rights Reserved.
Sell Online with Volusion.