FITS MURRAY.  
USED WITH OUR 8530 THROTTLE CONTROL ASSEMBLY.

HEIGHT:  12 mm
ID:  12 mm
OD:  17 mm

Replaces Murray 24532
ID 11/16" (17.46 mm)
OD 7/8" (22.23 mm)
Height 1-11/16" (42.86 mm)

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.3100"

HEIGHT:  12 mm
ID:  0.0500"
OD:  17 mm

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.2700"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5100"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.4600"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5900"

HEIGHT:  12 mm
ID:  0.0500"
OD:  0.2700"

HEIGHT:  12 mm
ID:  0.0500"
OD:  0.7600"

HEIGHT:  12 mm
ID:  0.3130"
OD:  0.3900"

REPLACES MURRAY 90035, 90035MA
FITS FRONT AXLE SPINDLE BEARING ON MURRAY PRE-1991 TRACTORS.
FLANGE OD: 1-1/8"
HEIGHT: 11/16"
ID: 3/4"
OD: 7/8"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.4100"

7/16" Long

REPLACES MURRAY 403010, GILSON 24829
FLANGE OD: 1-1/4"
HEIGHT: 3/4"
ID: 3/4"
OD: 1-1/8"
GRAPHITE IMPREGNATED METAL BUSHING

FITS MURRAY SWITCH 21064 & MOST UNIVERSAL TYPE SWITCHES.  ALSO FITS AMF/NOMA.  
FITS OUR R1928, R1930, R1931, R2922, R2941, R2942, R6545, R7179, R7280 & R7804 IGNITION SWITCHES

Replaces OEM#: MURRAY 91334 & 491334, AYP/ROPER/SEARS 9040H
USED ON 36", 38" AND 40" FRONT ENGINE RIDERS. (PLASTIC).
HEIGHT: 1"
ID: 3/4"
OD: 1-3/8"

Replaces Murray Part No. 579493, 5797936

Replaces Murray 310169

Will SS to 704213, 9344MA Genuine Murray Gear Case Screw 3/8-16 X 1/2

Replaces Murray 711617, MU711617

579858MA Genuine Murray Washer

Replaces 302628

Replaces NLA 20066MA
ID: 5/8" OD: 2-3/4" WIDTH: 1-7/8"

Replaces Murray 002X97MA

71530MA Upper rope guide for Murray

REPLACES MURRAY 165 X 58 & 20682, PRIME LINE 7-05352, SILVER STREAK 48-001, STENS 285-015, SUNBELT B1SB2934.
COIL DIAMETER 5/8", LENGTH OVERALL 5", LENGTH OF COIL 3-1/2", THICKNESS 5/64".

Fits Murray Dual Stage Snowblowers
ID : .0752
OD: .8

Replaces 724042, MT454565MA, 454565

Replaces Murray 431787, 431787MA
Woodruff Key No. 61 LENGTH: 5/8" WIDTH: 3/16"

Replaces 14915, 7014915

Murray Part # 581618, superceded by 581618MA
Fits many Craftsman and Murray 2 Stage Snow Throwers

Replaces Simplicity 1704082

REPLACES MURRAY 24615, 24615MA
FLANGE OD: 1-1/4"
HEIGHT: 3/4"
ID: 5/8"
OD: 1-1/8"
GRAPHITE IMPREGNATED METAL

1667588SM Genuine Murray Bushing
Simplicity 1668344 .248 ID x 1-3/4

Replaces Murray 91903
ID: .625
OD: .875
LENGTH: 1.91

Replaces Murray Part # 577021

Replaces 722118, 722365, MT1501200MA, 1501200

MURRAY 1501216, 1501216MA.
Includes two 9524MA shear pins and two 3943MA spacers
Fits Murray 62 Series Dual Stage Snowblowers
.25-20X

17X170MA Genuine Murray Gear Case Washer

50684MA Genuine Murray Gear Case Roll Bearing

48275MA Genuine Murray Gear Case Flat Washer

Replaces Murray 1501065

51443MA Genuine Murray Sleeve Knob

Replaces Murray 165X112, 165X112MA

NLA New # 95275MA

794696 Genuine Briggs Engine Key

Replaces Murray Part # 578060

Replaces 334514
.676 X 1.00 X .53

Replaces Murray Replaces Murray 1101366, 1101366MA
FITS 22" WALK BEHIND MOWERS WITH TECUMSEH ENGINES MADE FROM 2001-2003 WITH REAR BAGGER.
Conduit Length: 52"
Inner Wire: 59-1/4"

Replaces Murray 50304
3/4 ID x 1 OD

Replaces Murray 55547, 055547, 055547MA

Replaces Murray 7030, 318468

Replaces Murray 1101093, 1101093MA
Conduit Length: 44"
Inner Wire: 50"
FITS 20" WALK BEHIND MOWERS FROM 2000-2003.
3/16" Z-BEND ONE END AND 1/4" T  ON THE OTHER END.

Replaces: ARIENS 05403900, 05435100
BEARING SC0288LU
HAHN ECLIPSE 326985
SNAPPER/KEES 1-0756, 7010756, 7010756YP
May be used with or without retaining clip.
Fits McLane and Star Clipper edgers.
Bearing No. 99502H-2RSNR.
HEIGHT: 7/16"
ID: 5/8"
OD: 1-3/8"

Replaces OEM#: MTD 723-0156, 723-3018, 923-0156, 923-3018
MURRAY 021031, 21031
SNAPPER/KEES 1-0745, 7010745
BALL JOINT ASSEMBLY FITS MOST OF MURRAY & MTD RIDERS. FITS SNAPPER. RIGHT HAND THREADS.
THREAD SIZE: 3/8"-24

CHAIN TYPE:  #43
HEIGHT:  3/4"
ID:  1/2"
NO. OF TEETH:  10
OD:  1"

Replaces Murray 42096, 42776, 42877, 42878, 42879, 42949, 53415, 57353
Throttle fits Murray, Air Cap, MTD, & Roper. Positive Action Control.
CONDUIT: 60-13/32"
INNER WIRE: 62-9/32"
WIRE TRAVEL: 3/4"

REPLACES MURRAY 165X76SE.
COIL DIAMETER:  13/16"
LENGTH OF COIL:  4-1/4"
THICKNESS:  1/8"
TOTAL LENGTH:  11-1/2"

Replaces: MTD 732-0594A, 932-0594A
COIL DIAMETER:  29/32"
LENGTH OF COIL:  5-11/16"
THICKNESS:  1/8"
TOTAL LENGTH:  7-3/4"

Replaces Murray 339903

Murray Part # 307399, superceded by 307399MA
Fits many Craftsman and Murray 2 Stage Snow Throwers

Replaces 1726728SM,722242, 1726728, MT1501672MA, 304362MA, 1501672

Replaces Murray 1673

Replaces Murray Noma 584750

21-1/8" MURRAY LIFT CABLE. REPLACES MURRAY 21913, PLP 129-505,
PRIME LINE 7-04290, SILVER STREAK 46-414, STENS 285-726, SUNBELT B1SB858

280022  Briggs and Stratton Upper Rope Guide Pulley

Replaces 1666855

Replaces OEM#: MURRAY 301380E701MA ,301380E717MA, 780061MA, 1740718HMA
Fits the following Snowblower Models 1695557 - C950-52846-0 Craftsman Dual Stage Snow Thrower (2008),
1695558 - C950-52847-0 Craftsman Dual Stage Snow Thrower (2008),
622515x31B Dual Stage Snow Thrower (2000),
624505x54B Dual Stage Snow Thrower (2000),
624505x54B Dual Stage Snow Thrower (2001),
624508x4B Dual Stage Snow Thrower (2000),
624515x4B Dual Stage Snow Thrower (2000),
624605x61A Dual Stage Snow Thrower (2000),
6240810x110 - 18-2827-88 Castelgarden SN 624, Dual Stage Snowthrower (2007),
624555x110B SN624, Dual Stage Snow Thrower (2006)

NLA will be SS to 205912GS

Replaces Murray 1101360, 1101360MA
FITS 20" WALK BEHINDS WITH REAR BAGGER MADE FROM 2001-2003.  
3/16" Z-BEND ONE END AND 1/4" T ON THE OTHER END.
CONDUIT LENGTH:  42-1/2"
INNER WIRE:  48-3/4"

Replaces OEM#: Murray 672840, 672840MA.
Fits Walk Behind Mowers made from 2000-2003
Conduit: 42-1/2"
Inner Wire: 50"
3/16" Z Bend on one end, 1/4" T on other end.

Replaces  Murray 582957YZMA Ball Bearing Retainer

Replaces OEM#: MURRAY 37X64  
Fits Model: MURRAY AEROVAC 21", 5-5.5 HP WALK BEHIND MOWERS
V-BELT, RAW EDGE. *ARAMID FIBER.
Length: 36-25/32"
Width: 1/4"

Replaces 23711, 55990, 55988, 92317, 92317MA

Replaces Murray 21540PA, 23332, 23332PA
Positive Action Control. 3/16" Conduit, .058 Innerwire. Plastic Conduit Cover.
CONDUIT: 13-7/8"
INNER WIRE: 17-5/8"
WIRE TRAVEL: 1"

Replaces MTD 741-0155, 941-0155
Fits our R2925 Spindle Assembly.
Also used in our R8320 spindle repair kit.
Lower bearing.
Bearing No. 99502H
HEIGHT: 7/16"
ID: 5/8"
OD: 1-3/8"

1501075YZMA Genuine Murray Yoke Adapter Assembly

Replaces Craftsman, Murray 1501217, 301171, 500027

Conduit: 71"
Inner Wire: 76"
Wire Travel: 1-1/2"
REPLACES MURRAY walk behind mowers,
PRIME LINE 7-03978, SILVER STREAK 60-426,
STENS 290-203, SUNBELT B1TC86
plastic conduit converts from positive to negative action.

Replaces OEM#: MURRAY 37X49  
Fits Model:MURRAY 21" REAR DISCHARGE MODELS WITH 4 HP ENGINES
GLASS CORD CONSTRUCTION WITH BARE BACK COVER. COVERED.
Length: 40-3/16"
Width: 3/8"

Replaces Murray 50648
420T

Replaces OEM: Simplicity: 1713167, 1713167SM
Fits Models: Simplicity Regent, Sports and Broadmoor series
ID: 3/4 "
OD: 1 3/8 "
Height: 1 1/8 "
Steel
Package of 2
Priced per pack, sold per pack

Replaces Murray 42569, 42569MA
PLASTIC COVERED CONDUIT WITH BRACKETS.
CONDUIT:  44-1/2"
INNER WIRE:  52-1/2"
WIRE TRAVEL:  7-1/2"

FITS OUR R2925 MURRAY SPINDLE ASSEMBLY.
ALSO USED IN OUR R8320 SPINDLE REPAIR KIT. UPPER BEARING.
ID 5/8" (15.88 mm)
OD 1-9/16" (39.69 mm)
Height 15/32" (11.91 mm)

Replaces Murray 339904

Replaces Murray 165X119

Replaces OEM#: Murray 91178, 420613, 420613MA
Fits Murray 25", 30", 36" rear engine riders model 7-35500, 7-30502 and 7-25501.
Composite: glass filled nylon.
ID:  1/2"
OD:  3"
WIDTH:  11/16"