Toro/Wheel Horse O.E.M. Replacement Parts

You are here: Home > Parts by Manufacturer > Toro/Wheel Horse Replacement Parts

We found 287 results matching your criteria.

Choose a sub category:

Oil Filters

Sort By:

Page of 3

R8770 - Wheel Drive Key For Toro 39-9680

R8770 - Wheel Drive Key For Toro 39-9680

List Price: $1.53
Our Price: $0.50
You save $1.03!

KEY FITS TORO PROLINE 21" SELF PROPELLED MOWERS.
USED WITH ROTARY# 8207 WHEEL DRIVE GEAR.
HEIGHT: 0.1870"
LENGTH: 0.4520"
WIDTH: 0.1250"

R7177- SQUARE KEY FOR TORO

List Price: $1.00
Our Price: $0.50
You save $0.50!

REPL TORO 39-7842
Fits 21" SP walk behind
used on short shaft in gear case.
1/8" x 2"

R8447 WHEEL BOLT NUT FOR TORO/ EXMARK

List Price: $1.45
Our Price: $0.75
You save $0.70!

REPL TORO 32153-5
REPL EXMARK 804509
Fits our wheel bolt R8411 & R8419

8418 YOKE WASHER FOR TORO

List Price: $1.68
Our Price: $1.50
You save $0.18!

REPL TORO 3-6781
Fits TORO midsize mowers 36", 37", 44", 52" & 62"
cut decks. Models 30136, 30137, 30144, 30152 & 30162.
Used with 10-8477 yoke.
1-3/16" ID x 1-3/4" OD x 1/8" Thickness

R8993 - Air Vane replaces Toro 52-7060 for snowblower models S-200 & S-620

R8993 - Air Vane replaces Toro 52-7060 for snowblower models S-200 & S-620

List Price: $2.91
Our Price: $2.50
You save $0.41!

Replaces (OEM): TORO/WHEEL HORSE 52-7060
Fits snowblower models S-200 & S-620.
7 Air Vanes per unit is required

107-674 - Snowblower Bushing Replaces Toro 256-219

107-674 Snowblower Bushing Replaces Toro 256-219

Our Price: $2.75

Replaces OEM#: Toro 256-219
ID: 3/4"
OD: 1-3/4"
Length/Height: 1/2"

R9874 Wheel Spacer Replaces Toro/Wheel Horse 99-2842

R9874 Wheel Spacer Replaces Toro/Wheel Horse 99-2842

List Price: $4.36
Our Price: $3.00
You save $1.36!

Replaces OEM#: Toro/Wheel Horse 99-2842
Fits TORO Z Master antiscalp roller wheel bolt.
LENGTH: 4-1/4"
OD: 5/8"

R8419 - 1/2" x 5-1/4" WHEEL BOLT FOR TORO/ EXMARK

List Price: $4.69
Our Price: $3.00
You save $1.69!

R8419 WHEEL BOLT FOR TORO
REPL TORO 325-19 & EXMARK 800334.
Fits TORO commercial midsize 36", 37", 44", 52" & 62" cut deck.
Fits models 30136, 30137, 30144, 30152 & 30162.
Fits TORO wheel 68-8970.
1/2" x 5-1/4"

107-681 Bushing Support Replaces Toro 20-1020

107-681 Bushing Support Replaces Toro 20-1020

Our Price: $3.50

Replaces OEM#: Toro 20-1020
Used with 107-675 - Snowblower Bushing Replaces Toro 20-1010

107-680 Bushing Replaces Toro 256-205

Our Price: $3.50

Replaces OEM#: Toro 256-205
ID: 1"
OD: 7/8"
Length/Height: 3/4"

R6465- Toro 80-0510-03 Blade Stiffener

Our Price: $3.75

Replaces OEM #:TORO/WHEEL HORSE 80-0510-03.
Used with our R6256 Blade.

5841 - 1/4" Universal Inline fuel cut off valve

List Price: $6.63
Our Price: $3.75
You save $2.88!

Replaces (OEM): BRIGGS & STRATTON 494768 & 698183
JOHN DEERE AM107340 & AM36141
SNAPPER 2-4507, 3-4212 & 7034212
TORO 54-3150

Specs: Material: Plastic
Fits 1/4" ID fuel line
Made by an OEM supplier
Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

R8207 - Toro 39-9160 Wheel Drive Gear

List Price: $4.89
Our Price: $3.99
You save $0.90!

DRIVE GEAR FITS TORO/WHEEL HORSE MODELS:
22020, 22030, 22035 & 20680 REAR WHEEL DRIVE MODELS.

100-727 Air Filter Replaces Toro/Wheel Horse 81-0100

Our Price: $3.99

Toro 81-0100.
Fits model GTS 2-cycle engines.
3 5/8" W x 6 1/2" L x 1 1/4" HT.

107-676 - Bushing Replaces Toro 256-2151020

107-676 - Bushing Replaces Toro 256-215

Our Price: $3.99

Replaces OEM#: Toro 256-215
ID: 3/4"
OD: 7/8"
Length/Height: 3/4"
Flange OD: 1"

R430 - 4.75" X 1.375" MTD 734-0973 and Toro 112-0037 Wheel Assembly

List Price: $6.74
Our Price: $4.25
You save $2.49!

Deck Wheel. Replaces MTD 734-0973 & Toro 112-0037, 1-1/2" offset hub.
Size: ID 1/2"; Width 1-3/8"; Height 4-3/4"
Replaces OEM #: 734-0973

R5053 - 20" Length - 4L200 Premium Belt

List Price: $7.65
Our Price: $4.35
You save $3.30!

Replaces OEM#:AMF / DYNAMARK / NOMA 20317, BOLENS 110-8453,170-3085,170-5061,171-4251, FATE - ROOT-HEATH 1330, HOMELITE/JACOBSEN 04393A,313775,314804,324136,372780,REM1415,
MASSEY FERGUSON 51432M1, MTD 754-0126,754-0156,754-0232,7595,954-0156,954-0232,
McLANE 4060, TORO / WHEEL HORSE 1556,271-16, YAZOO 205-020
Premium Belts have a protective cover made of a synthetic rubber compound
having excellent resistance to heat, oil and abrasion.
Length:20" Width:1/2"

R5063 - 30" Length - 4L300 Premium Belt

List Price: $8.75
Our Price: $4.50
You save $4.25!

Replaces OEM#:BOLENS 110-8463,172-0573, E-Z ROLL S-335, EDKO 20824, HOMELITE / JACOBSEN 2058, LITTLE WONDER 177, MTD 754-0107,754-0196,954-0107,954-0196, TORO / WHEEL HORSE 1561,1573, McLane 2058.
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:30"
Width:1/2"

R7920 - Toro 18-9690 Wheel Drive Gear

List Price: $7.40
Our Price: $4.50
You save $2.90!

FITS TORO/WHEEL HORSE SIDE DISCHARGE,
FRONT WHEEL DRIVE SELF PROPELLED MODELS.

100-263 Air Filter Replaces Toro/Wheel Horse 81-4120

Our Price: $4.50

Toro 81-4120.
Fits model OHV.
2" W x 7 1/16" L x 1 3/16" HT.

R5014 - 31" Length - 3L310 Premium Belt

List Price: $7.65
Our Price: $4.70
You save $2.95!

Replaces OEM#:ARIENS 72099, LAWN-BOY 602957, 609957, MTD 754-0205, TORO / WHEEL HORSE 5-4505, 7-0074
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:31"
Width:3/8"

8420- SPANNER BUSHING 1/2 X 3/4 FOR TORO/WHEEL HORSE 68-8980/ GRAVELY 11950

R8420 - SPANNER BUSHING REPLACES TORO/WHEEL HORSE 68-8980 AND GRAVELY 11950

List Price: $10.15
Our Price: $4.99
You save $5.16!

REPLACES TORO/WHEEL HORSE 68-8980/ GRAVELY 11950
ID 1/2", OD 3/4", Length 3-11/32"

13407 - Rear Spring Arm Assembly for Toro 66-7561

13407 - Rear Spring Arm Assembly for Toro 66-7561

List Price: $6.13
Our Price: $4.99
You save $1.14!

Replaces OEM: TORO 66-7561 Rear Spring Arm Assembly
Fits Toro Commercial mowers.

230-060 Spindle Bearing for Snowblowers, Chainsaws & more.

230-060 Spindle Bearing for Snowblowers, Chainsaws & more.

List Price: $7.34
Our Price: $5.00
You save $2.34!

Replaces (OEM): ARIENS 05418800
AYP 110485
AYP 110485X
CUSHMAN 832498
DOLMAR 960 102 176
GILSON 236544
GREENFIELD GTO396
HUSQVARNA 532 11 04-85
JOHN DEERE JD8535
KING-O-LAWN 7192
LAWN-BOY 700479
LAWN-BOY 703275
MAKITA 960 102 176
MTD 741-0124
MTD 941-0124
NOMA 49562
SIMPLICITY 1666292
SIMPLICITY 1705897
SNAPPER 1-3020
SNAPPER 7013020
TORO 38-7820
TROY BILT 1120502
TROY BILT 1185064
TROY BILT 941-0124
UNIVERSAL 6203-2RS
VICTA ME63217A
WACKER 0125686

Fits Models: ARIENS 93700 series snowthrowers
AYP 93700 series snowthrowers
DOLMAR PC-64XX, PC-73XX AND PC-81XX MODEL CUTOFF SAWS
JOHN DEERE LX172, LX173, LX176, LX178, LX186, LX188, GT242, GT262, GT275, Z TRAK
MAKITA DPC64XX, DPC73XX AND DPC81XX MODEL CUTOFF SAWS
MTD 074, 084, 114 and 314 series; spindle bearing
SEARS 917.270722; spindle bearing
TORO S-200, S-620 and CCR2000 snowthrowers
WACKER BTS930, BTS935, BTS1030 AND BTS1035 MODEL CUTOFF SAWS
REF. NO.: 6203-2RS
ID: 0.669"
OD: 1.575"
Height: 0.475"

R5070 - 37" Length - 4L370 Premium Belt

List Price: $8.75
Our Price: $5.25
You save $3.50!

Replaces OEM#:AYP / ROPER / SEARS STD324370, BOLENS 110-8470, 181-3220, GILSON 16366 (5HP), MTD 754-0154, 754-0255, 954-0154, 954-0255, MURRAY 337X6, ROTO-HOE 1079, STEINER 81A035, SWEEPSTER 06-0165, TORO / WHEEL HORSE 1552, 19-2650, YARDMAN 754-0225
Premium Belts have a protective cover made of a synthetic rubber compound
having excellent resistance to heat, oil and abrasion.
Length:37" Width:1/2"

R5071 - 38" Length - 4L380 Premium Belt

List Price: $8.75
Our Price: $5.25
You save $3.50!

Replaces OEM#:BOLENS 172-6929, GILSON 14790, 37230, MAXIM 320372204, SOUTHLAND SP2-700, TORO / WHEEL HORSE 271-104, 3-8445, YARDMAN 754-275
Premium Belts have a protective cover made of a synthetic rubber compound having excellent resistance to heat, oil and abrasion.
Length: 38"
Width: 1/2"

R5072 - 39" Length - 4L390 Premium Belt

List Price: $8.75
Our Price: $5.25
You save $3.50!

Replaces (OEM): SIMPLICITY/ALLIS CHALMERS 1665706, 1665706SM & 8021077, AMF/DYNAMARK/NOMA 42858, MONTGOMERY WARD 2038-39, MTD 754-0190 & 954-0190, SOUTHLAND SP9-413, STEINER 81A038, TORO/WHEEL HORSE 1563, 20-1820 & 3-8445
WESTERN AUTO 16149.
Width: 1/2" (12.70mm)
Length: 39" (990.6mm)

13406 - Front Spring Arm Assembly for Toro 66-7560

13406 - Front Spring Arm Assembly for Toro 66-7560

List Price: $6.13
Our Price: $5.25
You save $0.88!

Replaces OEM: TORO 66-7560 Front Spring Arm Assembly
Fits Toro Commercial mowers.

R5074 - 41" Length - 4L410 Premium Belt

List Price: $9.85
Our Price: $5.75
You save $4.10!

Replaces OEM#:AMF / DYNAMARK / NOMA 4231, 44150, BOLENS 110-8474, MERRY TILLER 227B, MONTGOMERY WARD 163142, MTD 754-0201, 754-0234, 954-0201, 954-0234, MURRAY 20555, 37X1, PRO 7520026, SIMPLICITY / ALLIS CHALMERS 1664457, 1664457SM, SOUTHLAND R8371, STEINER 81A039, TORO / WHEEL HORSE 19-2790, TURFCO 655319
V-BELT FOR SNOWBLOWERS
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:41"
Width:1/2"

R5077 - 44" Length - 4L440 Premium Belt

List Price: $9.85
Our Price: $5.75
You save $4.10!

Replaces OEM#:AMF / DYNAMARK / NOMA 45187, BOLENS 172-0131, 172-2993, JOHN BEAN 1180477, MTD 754-0189, 754-0222, 954-0189, 954-0222, MURRAY 37X9, PENNSYLVANIA 74238, SIMPLICITY / ALLIS CHALMERS 174911, SOUTHLAND RR703, STEINER 81-8041, 81A042, TORO / WHEEL HORSE 11-3912, 1555, 17-6540, 19-2220, 5-7960
V-BELT FOR SNOWBLOWERS
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:44"
Width:1/2"

SL10241 Bargain Oil Filter fits Briggs, Onan, Kohler and more

SL10241 Bargain Oil Filter fits Briggs, Onan, Kohler and more

List Price: $8.88
Our Price: $5.75
You save $3.13!

Replaces (OEM): BAD BOY 063-2010-00
BAD BOY 063-5400-00
BOBCAT I.R. 6513601
BOBCAT I.R. 6652366
BRIGGS & STRATTON 4153
BRIGGS & STRATTON 491056
BRIGGS & STRATTON 491056S
CASE C26191
GRASSHOPPER 100802
GRAVELY 042366
JACOBSEN 5000440
JOHN DEERE AM101207
KOHLER 52 050 02
KOHLER 52 050 02-S
ONAN 122-0645
TORO NN10147
TORO 491056
TORO 52 050 02-S
WOODS 70939

Fits Models: BOBCAT I.R. Skid Steer: 440B (with Kohler engine); 450 (with Kohler engine); 632; 642; 722 (with Ford 4-98 engine); 732; 742 (with Ford engine)
BRIGGS & STRATTON Vanguard engines large version filter; pressure lubrication engines
JOHN DEERE Lawn tractor STX46 (290001) with Kohler engines
KOHLER CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 and K582
ONAN P216, P218, P220, BFA, BGA, BGAL, BGD, BGDL,BGE, BGEL, BGM, B43G and B48GM
TORO With Kohler engines
WOODS With Kohler engines
OD: 3"
Height: 3 7/16"
Micron: 27
Thread Size: 3/4" -16
8-11 PSI pressure relief
Anti-drain

R8201 - 2.9375" to 3.25" Wheel Horse 108798, 94-1599 Deck Wheel

List Price: $6.68
Our Price: $5.75
You save $0.93!

Deck wheel. Replaces Wheel Horse 108798, 94-1599. Used on 36", 42" and 48" decks.
Deck models 300, 400 and 500 series. 3-1/2" centered hub.
Replaces OEM #: 108798
Size: ID 1/2"; Width 3-1/4"; Height 2-15/16"

8476 - Yoke Bushing Replaces Toro 28-9290

List Price: $6.75
Our Price: $5.99
You save $0.76!

YOKE BUSHING REPLACES TORO 28-9290.
FITS TORO MIDSIZE MOWERS 36", 37", 44", 52", 62" CUT.
DECK MODELS: 30136, 30137, 30144, 30152 & 30162.
HEIGHT: 1"
ID: 1-1/8"
OD: 1-3/8"

120-137 Oil Filter fits John Deere, Kawasaki, Kubota, Polaris

120-137 Oil Filter Fits John Deere, Kawasaki, Kubota, Polaris

List Price: $7.62
Our Price: $6.25
You save $1.37!

JOHN DEERE M806418
KAWASAKI 16097-1072
KUBOTA HH15032430
POLARIS 3084963

JOHN DEERE 1420, 1435, F735, F925, F935, 455, HPX Gator,2500 and 2500A Greensmowers
Specs: OD:2 5/8"
Height:2 1/2"
Micron:20
Thread Size:20mm X 1.5MM
11-14 PSI pressure relief
Anti-drain valve
U.S. Made

172-093 - Snowblower Skids fit Murray 1740912AYP, Noma 85105 & Toro 74-1440

172-093 Snowblower Skid fit Murray 1740912AYP, Noma 85105 & Toro 74-1440

Our Price: $6.25

Replaces OEM#: Murray 1740912AYP, Noma 85105 & Toro 74-1440
Fits MTD Push 20" snowblowers; for 2 and 5 HP engines and snowblower model 721.
Fits the following Murray Snowblower Models:
1695539 - Murray Dual Stage Snowthrower (2008)
1695540 - Murray Dual Stage 27" Snowthrower (2008)
1695541 - Murray Dual Stage 27" Snowthrower (2008)
1695566 - Brute 11.5 TP Snowthrower (2008)
1695575 - Brute 11.5 TP Snowthrower (2008)
Fits the following Toro Snowblower Models:
38574, 828 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38083, 824XL Power Throw Snowthrower, 1997 (SN 7900001-7999999)
38083, 824XL Power Throw Snowthrower, 1998 (SN 8900001-8999999)
38084, 824XL Power Throw Snowthrower, 1997 (SN 7900001-7999999)
38084, 824XL Power Throw Snowthrower, 1998 (SN 8900001-8999999)
38540, 824 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38540, 824 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38540, 824 Power Shift Snowthrower, 1994 (SN 4900001-4999999)
38540, 824 Power Shift Snowthrower, 1995 (SN 5900001-5999999)
38540, 824 Power Shift Snowthrower, 1996 (SN 6900001-6999999)
38540, 824 Power Shift Snowthrower, 1997 (SN 7900001-7999999)
38540, 824 Power Shift Snowthrower, 1998 (SN 8900001-8999999)
38543, 824 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38543, 824 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38543, 824 Power Shift Snowthrower, 1994 (SN 4900001-4999999)
38543, 824 Power Shift Snowthrower, 1995 (SN 5900001-5999999)
38543, 824 Power Shift Snowthrower, 1996 (SN 6900001-6999999)
38543, 824 Power Shift Snowthrower, 1997 (SN 7900001-7999999)
38543, 824 Power Shift Snowthrower, 1998 (SN 8900001-8999999)
38555, 1028 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38555, 1028 Power Shift Snowthrower, 1994 (SN 4900001-4999999)
38555, 1028 Power Shift Snowthrower, 1995 (SN 59000001-59999999)
38555, 1028 Power Shift Snowthrower, 1996 (SN 69000001-69999999)
38555, 1028 Power Shift Snowthrower, 1997 (SN 790000001-799999999)
38555, 1028 Power Shift Snowthrower, 1998 (SN 890000001-899999999)
38556, 1028 Power Shift Snowthrower, 1996 (SN 6900001-6999999)
38556, 1028 Power Shift Snowthrower, 1997 (SN 7900001-7999999)
38556, 1028 Power Shift Snowthrower, 1998 (SN 8900001-8999999)
38566, 1132 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38566, 1132 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38566, 1132 Power Shift Snowthrower, 1994 (SN 49000001-49999999)
38566, 1132 Power Shift Snowthrower, 1995 (SN 59000001-59999999)
38570, 828 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38570, 828 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38570, 828 Power Shift Snowthrower, 1994 (SN 4900001-4999999)
38570, 828 Power Shift Snowthrower, 1995 (SN 5900001-5999999)
38580, 1132 Power Shift Snowthrower, 1992 (SN 2000001-2999999)
38580, 1132 Power Shift Snowthrower, 1993 (SN 3900001-3999999)
38580, 1132 Power Shift Snowthrower, 1994 (SN 4900001-4999999)
38580, 1132 Power Shift Snowthrower, 1995 (SN 5900001-5999999)
38590, 1232 Power Shift Snowthrower, 1997 (SN 7900001-7999999)
38590, 1232 Power Shift Snowthrower, 1998 (SN 8900001-8999999)
38591, 1232 Power Shift Snowthrower, 1997 (SN 7900001-7999999)
38591, 1232 Power Shift Snowthrower, 1998 (SN 8900001-8999999)
38590, 1232 Power Shift Snowthrower, 1996 (SN 6900001-6999999)
38591, 1232 Power Shift Snowthrower, 1996 (SN 6900001-6999999)

Overall Width: 5-7/8"
Height: 3-7/16"
Slot Size: 3/8" x 2-3/16"
Slots Center to Center: 2-1/2"
Center Hole: 5/8"

Quantity Discounts Available

120-634 Oil Filter fits Briggs & Stratton, Club Car, Cub Cadet, Cushman, Ferris, Generac, Gravely, Hustler, John Deere, Kawasaki, Lesco, Onan, Robin, Shindaiwa, Snapper, Tecumseh, Toro and Woods

120-634 Oil Filter Fits Many OEMs

List Price: $7.21
Our Price: $6.25
You save $0.96!

Replaces (OEM): BAD BOY 063-2090-00
BRIGGS & STRATTON 499532
BRIGGS & STRATTON 692513
BRIGGS & STRATTON 70185
BRIGGS & STRATTON 820314
CLUB CAR 1016467
CUB CADET 490-201-0001
CUSHMAN 833438
FERRIS 5021334X1
GENERAC 070185
GENERAC 070185D
GENERAC 070185GS
GENERAC 70185
GENERAC 70185GS
GRASSHOPPER 100806
GRAVELY 043594
GRAVELY 20777000
GRAVELY 21480600
GRAVELY 21527900
GRAVELY 21535800
HUSTLER 772079
JOHN DEERE AM101054
JOHN DEERE AM107423
KAWASAKI 49065-2057
KAWASAKI 49065-2062
KAWASAKI 49065-2071
KAWASAKI 49065-2078
LESCO 014888
ONAN 122-0737
ONAN 122-0737-03
ROBIN 248-65801-00
ROBIN 261-65902-A0
SHINDAIWA 5023396X1
SNAPPER 7-7355
SNAPPER 7077288
SNAPPER 77288
TECUMSEH 36262
TORO NN10684
TORO 108-3842
WOODS 72859
Fits Models:
CUB CADET 1500 series tractors with 15 thru 19 HP Kawasaki engines
JOHN DEERE Lawn tractors 112L, LX172 and LX176 with Kawasaki engines; front mount F510
KAWASAKI For 14 thru 19 HP engines
ONAN E125V
ROBIN EH18V, EH64 and EH65
SNAPPER With Kawasaki engines
TECUMSEH OHV15 specs 204003, 204005, 204010, 204013 and OHV16 specs 204205A
TORO With Kawasaki engines
WOODS With Kawasaki engines
OD: 2 11/16"
Height: 2 7/8"
Micron: 25
Thread Size: 3/4" -16
9-12 PSI pressure relief
Anti-drain
Original Kawasaki equivalent 054-067 Oil Filter
U.S. Made

R6917 - 5" X 2.75" Deck Wheel, 2-1/2"Offset, 5/8" Center Hole

List Price: $8.57
Our Price: $6.50
You save $2.07!

Replaces OEM #: Bunton PL7540, Lawnboy 68-2730, Grasshopper 484230, Exmark 603299, 1-603299, Toro 68-2730, Gilson 710138, Yazoo 2302-127.
BORE: 5/8"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

For Hardware, order R10007 Anti-Scalp Roller Kit for EXMARK

7976 - Ignition Switch replaces Toro - Wheelhorse 29-5560 , 40-5940

7976 - Ignition Switch replaces Toro - Wheelhorse 29-5560 , 40-5940

List Price: $7.84
Our Price: $6.50
You save $1.34!

Replaces OEM#" TORO/WHEEL HORSE 29-5560 , 40-5940
FITS TORO 32", 36", 37", 44", 52", MID SIZE COMMERCIAL MOWERS WITH PULL START.
ALSO FITS SCAG, BOBCAT, BUNTON & EXMARK.
INCLUDES MOUNTING HARDWARE.

120-722 Oil Filter fits HONDA 15400-PLM-A01PE

120-722 Oil Filter Fits Honda 15400-PLM-A01PE

List Price: $9.04
Our Price: $6.75
You save $2.29!

Replaces OEM#: HONDA 15400-PLM-A01PE
TORO 108-3841

HONDA GX610, GX620, GX670, GXV340, GXV390, GXV610,GXV620 and GXV670 engines; HA4118, HA4120, HRC7013, HRC7031K1, HRC7018, HRC7020, HRC7113 and H6522 mowers; EB1100 and EB12D generators
Specs: OD:2 11/16"
Height:3 3/8"
Micron:27
20MM X 1.5MM THD
Honda code 7698475
U.S. Made

120-345 Oil Filter fits Briggs & Stratton, Bobcat, Case, Grasshopper, Gravely, Jacobsen, John Deere, Kohler, Onan, Toro & Woods

120-345 Oil Filter Fits Briggs & Stratton, Bobcat, Case, Grasshopper, Gravely, Jacobsen, John Deere, Kohler, Onan, Toro & Woods

List Price: $8.88
Our Price: $6.75
You save $2.13!

Replaces (OEM): BAD BOY 063-2010-00
BAD BOY 063-5400-00
BOBCAT I.R. 6513601
BOBCAT I.R. 6652366
BRIGGS & STRATTON 4153
BRIGGS & STRATTON 491056
BRIGGS & STRATTON 491056S
CASE C26191
GRASSHOPPER 100802
GRAVELY 042366
JACOBSEN 5000440
JOHN DEERE AM101207
KOHLER 52 050 02, 5205002
KOHLER 52 050 02-S
ONAN 122-0645
TORO NN10147
TORO 491056
TORO 52 050 02-S
WOODS 70939
Fits Models:
BOBCAT I.R. Skid Steer: 440B (with Kohler engine); 450 (with Kohler engine); 632; 642; 722 (with Ford4-98 engine); 732; 742 (with Ford engine)
BRIGGS & STRATTON Vanguard engines large version filter; pressure lubrication engines
JOHN DEERE Lawn tractor STX46 (290001) with Kohler engines
KOHLER CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 andK582
ONAN P216, P218, P220, BFA, BGA, BGAL, BGD, BGDL,BGE, BGEL, BGM, B43G and B48GM
TORO With Kohler engines
WOODS With Kohler engines
Specs: OD:3"
Height:3 7/16"
Micron:27
Thread Size:3/4" -16
8-11 PSI pressure relief
Anti-drain
Original Kawasaki equivalent 055-109 Oil Filter
U.S. Made

442 MTD 741-0919 & 941-0919 Spindle Bearing for Models 491, 831, 832 & 930 series snowthrowers

442 - Spindle Bearing Replaces MTD 741-0919 & 941-0919 for Models 491, 831, 832 & 930 series snowthrowers

List Price: $11.19
Our Price: $6.99
You save $4.20!

Replaces (OEM): ARIENS 54123
AYP/ROPER/SEARS 129895
BEARING 6204DU
BOLENS 172-8225
HUSQVARNA 532 12 98-95 & 738220419
JOHN DEERE JD7677R
MASSEY FERGUSON 1568
MTD 741-0919 & 941-0919
SIMPLICITY/ALLIS CHALMERS 118011, 1652231, 1652231SM, 2118011 & 2118011SM
SNAPPER/KEES 1-2828
TORO/WHEEL HORSE 251-297 & 251-318

Fits Models: AYP 917.270722, located on mower deck bottom of spindle
MTD 491, 831, 832 and 930 series snowthrowers
SNAPPER 60370 and 80499, 54" cut decks
HEIGHT: 9/16"
ID: 25/32"
OD: 1-27/32"
Honda code 3175999
Fits our R8479 Spindle Shaft w/Hardware
Fits our R7155 MTD Spindle Assembly
Fits our R7156 MTD Spindle Assembly
Fits our R8479 MTD Spindle Assembly
Fits our R9288 MTD Spindle Assembly
Fits our R8967 MTD Short Spindle Assembly
Fits our R8468 MTD Long Spindle Assembly

R13247 V-Belt replaces TORO 93-0232

List Price: $7.44
Our Price: $6.99
You save $0.45!

Replaces OEM: TORO 93-0232
Fits 21" Recycler
Wrapped-molded
Fiberglass cord construction, single cover, clutching (White)
LENGTH: 31-15/16"
WIDTH: 3/8"

R9700 - Oil Tank Cap For Exmark/Toro

List Price: $9.46
Our Price: $7.25
You save $2.21!

Replaces OEM #: 513167
Oil tank cap replaces Toro E513167.
Also replaces Exmark 513167. 2" Dia.

120-523 Oil Filter fits Ariens, Cub Cadet, Ferris, Gravely, Hustler, John Deere, Kohler, Lesco, Toro and Woods

120-523 Oil Filter Fits Ariens, Cub Cadet, Ferris, Gravely, Hustler, John Deere, Kohler, Lesco, Toro and Woods

List Price: $10.07
Our Price: $7.25
You save $2.82!

Replaces (OEM): ARIENS: 08200204
ARIENS: 21397200
CRAFTSMAN: 24604
CUB CADET: CC-12-050-08
CUB CADET: KH-12-050-01-S1
FERRIS: 5021144X1
GRAVELY: 21397200
HUSQVARNA: 531 30 73-93
HUSTLER: 747303
JOHN DEERE: AM125424
JOHN DEERE: GY20577
JOHN DEERE: KH1205008
KOHLER: 12 050 01
KOHLER: 12 050 01-S
KOHLER: 12 050 08
KOHLER: 25 050 21-S
LESCO: 032009
TORO: 12 050 01-S
TORO: 98020
WOODS: 70820

Fits Models:
CUB CADET: 1500 and 2000 series lawn tractors with Kohler engines
GRAVELY: With Kohler engines
JOHN DEERE: Lawn tractors SST15, L100 and LX173 with Kohler engines
KOHLER: CH18-CH25 and CV18-CV25
WOODS: With Kohler engines

Specs: OD:3"
Height:2 3/4"
Micron:32
Thread Size:3/4" -16
8-11 PSI pressure relief
Anti-drain
Available in our 120-513 Oil Filter Shop Pack (12)
Original Kawasaki equivalent 055-105 Oil Filter
Available in our 120-612 Oil Filter - Profit Builder
U.S. Made

198-553 - Snowblower Fan Bearing Replaces Toro 251-224

198-553 - Snowblower Fan Bearing Replaces Toro 251-224

Our Price: $7.25

Replaces OEM#: Toro 251-224
ID: 7/8"
OD: 2-1/32"
Length/Height: 1-1/16"

R9663 Plunger Interlock Switch for Ariens, Great Dane, John Deere, MTD, Murray, Scag, Snapper & Toro

R9663 Plunger Interlock Switch for Ariens, Great Dane, John Deere, MTD, Murray, Scag, Snapper & Toro

Our Price: $7.50

Plunger interlock switch replaces Ariens 27541, Great Dane D38001, John Deere AM103119, MTD 725-3167, Murray 57211, Scag 481638, Snapper 15707, Toro 82-2190.
Single post, right angle snap mounted. Normally open.

107-678 - Snowblower Bushing Replaces Toro 20-0980

107-678 Snowblower Bushing Replaces Toro 20-0980

Our Price: $7.50

Replaces OEM#: Toro 20-0980
ID: 1"
Length/Height: 1-3/16"

125-157 Fuel Cap Replaces Toro 42-0680

List Price: $8.82
Our Price: $7.75
You save $1.07!

Replaces (OEM): TORO 42-0680
Fits Models: TORO S200 and S620 snowthrowers
ID:1 1/2"
Vented
Not compatible with greater than 10% ethanol fuel

S215-111 Bearing Race

List Price: $8.72
Our Price: $7.99
You save $0.73!

Replaces (OEM): ARIENS 05407000
CUSHMAN 814474
DIXIE CHOPPER 10206
EZ-GO 51141-81
GILSON 1046
JOHN DEERE JD8253
LAWN-BOY 254-72
LAWN-BOY 703809
SCAG 48005-04
SCAG 481895
TAYLOR-DUNN 80-103-00
TORO 254-72
UNIVERSAL L44610
WOODS 003585

Fits Models: JOHN DEERE 303, 305 and 1500
SCAG New style spindles
TAYLOR-DUNN New style spindles
TORO Greensmaster 3, 300, 3000 and 3100, Reelmaster 223D and 5100D
REF. NO.: L44610
OD: 1.980"
Height: 0.420"
Fits our S215-103 Roller Bearing

R484 - Spindle Bearing Fits many OEMs

List Price: $11.75
Our Price: $7.99
You save $3.76!

Replaces; ALLIS CHALMERS 536986, ARIENS 05412000, 54073, 54120, BOLENS 118-5828, CUB CADET 465003-R91, DIXON 6011, GRAVELY 11641, 35925, HOGG 11109, JOHN DEERE 9266, 9296, MASSEY FERGUSON 833-411-M1, 83341M1, SIMPLICITY/ALLIS CHA 108202, 2108202, 2108202SM, 536986, SNAPPER/KEES 1-0696, 1-3313, 7013313, 7013313, TORO/WHEEL HORSE 10-9842 & YAZOO 204-060.
Used on our R7154 Shaft. Bearing No. 9504-ZZ.
Size: ID 3/4", OD 1-25/32", Height 19/32"

R2176 FLAT IDLER PULLEY FOR AYP REPL 24392 (3/8

R2176 FLAT IDLER PULLEY FOR AYP REPL 24392 (3/8" X 3-1/8")

List Price: $9.61
Our Price: $7.99
You save $1.62!

Replaces:
AYP/ROPER/SEARS 104679X
CASE/INGERSOLL C-18966
E.T.RUGG 21101
HAHN ECLIPSE 451179
HUFFMAN 24392
MTD 756-0225
MTD 956-0225
OREGON 34-008
PRIME LINE 7-05205
PRIME LINE 7-05434
STENS 280-057
SUNBELT B1SB2176
TORO/WHEEL HORSE 11-1560

A: 3-1/8"
B: 2-3/4"
C: 3/8"
D: 3/4"
E: 1/2"
F: 11/32"
H: 1/16"
T: .050"

5509 Snowblower Paddle replaces Toro 23-3730 for Models S200, S620, Snowmaster & Snow Master 20

5509 Snowblower Paddle replaces Toro 23-3730 for Models S200, S620, Snowmaster & Snow Master 20

List Price: $12.39
Our Price: $7.99
You save $4.40!

Replaces (OEM): TORO/WHEEL HORSE 23-3730
Fits Toro Snowblower Models 31505 & 31506 Snowmaster, 38020 & 38030 Snow Master 20, 38120 S-200, 38130 S-200, 38220 S-200, 38225 S-200, 38230 S-200, 38232 S-200, 38235 S-200, 38242 S-200, 38252 S-200, 38162 S-620, 38165 S-620, 38165C S-620, 38167C S-620
Width: 2-5/8"
Length: 17-5/8"
Seven 1/4" mounting holes

6915 - 5" X 1.375" Deck Wheel, 1-1/2 Center Hub, 1/2" Center Hole Steel Bushing

List Price: $10.71
Our Price: $7.99
You save $2.72!

Replaces OEM#:
John Deere AM33718,
Ingersoll/Case C25139 and C26736,
Lawn-Boy 740280,
Sears/Roper 105455X,
Toro 61-9760,
Bolens 1735583,
AYP 105455X,
Husqvarna 5321054-55,
Poulan 530-105455, and
Gilson 210453.
HUB: 1-1/2" CENTERED
OD: 5"
TREAD: SLICK
WIDTH: 1-3/8"

R2235 - Universal Vented Gas Cap with Shutoff for Newer Style Tanks

R2235 - Universal Vented Gas Cap with Shutoff for Newer Style Tanks

List Price: $8.72
Our Price: $8.25
You save $0.47!

Replaces (OEM): ARIENS 01538400
BOBCAT 48587
BRIGGS & STRATTON 397975, 493988 & 493988S
ENCORE 363257
GRASSHOPPER 100210
HOWARD PRICE 09-528
HUSQVARNA 539 91 43-63
HUSTLER 779306
JOHN DEERE AM107344
KEES 914363
KOHLER 15 173 02-S
LESCO 050262
MTD 751-3111 & 951-3111
MURRAY 23711 & 92317
SIMPLICITY 1678045 & 1714020
SNAPPER 1-2515, 1-9378 & 7012515
TORO 112-0321
TROY BILT 951-3111
Fits Models: ARIENS Mini Zoom, Sport Zoom, EZR, HVZ, rear engine rider and yard tractors
BRIGGS & STRATTON For 7 thru 12.5 HP vertical, 3.5, 5 & 9 HP Industrial Plus & 5.5 HP Intel engines
UNIVERSAL Also fits Lawn-Boy and other brands
Inside Diameter: 2"

R2193 FLAT IDLER PULLEY 3/8"X 1-7/8" IP3015-2

List Price: $10.29
Our Price: $8.25
You save $2.04!

Replaces:
PRIME LINE 7-05453
STENS 280-487
TORO/WHEEL HORSE 25-5880

B: 1-7/8"
C: 3/8"
D: 15/16"
E: 3/8"
F: 11/32"
H: 1/8"
T: .050"

R11597- TRANSMISSION FILTER FOR KUBOTA REPLACES 66021-36060

R11597- TRANSMISSION FILTER FOR KUBOTA REPLACES 66021-36060

List Price: $10.66
Our Price: $8.25
You save $2.41!

Transmission Filter replaces Kubota 66021-36060. Also replaces Toro 85-4930 and Perkins 1405161-90

R5933 Universal Starter Solenoid fits Ariens, AYP, Bolens, Gilson, Grasshopper, Gravely, Lawn-Boy, Simplicity, Snapper & Toro

R5933 Universal Starter Solenoid fits Ariens, AYP, Bolens, Gilson, Grasshopper, Gravely, Lawn-Boy, Simplicity, Snapper & Toro

List Price: $18.31
Our Price: $8.50
You save $9.81!

Replaces OEM #: ARIENS 03551000, 35510, 3551000
AYP/ROPER/SEARS 192507
BOLENS 175-2137, 175-3539
GILSON 212655
GRASSHOPPER 184251
GRAVELY 45071
LAWNBOY 740207
SIMPLICITY/ALLIS CHALMERS 1685290, 1700751
SNAPPER/KEES 1-8604, 75622
TORO/WHEEL HORSE 11-0116, 47-1910
LOWER STUD THREAD: 3/16"
UPPER STUD THREAD: 1/4"

5527 - Snowblower Scraper Bar replaces Toro 75-8780 for Powerlite models

5527 - Snowblower Scraper Bar replaces Toro 75-8780 for Powerlite models

List Price: $9.64
Our Price: $8.50
You save $1.14!

Replaces (OEM): TORO/WHEEL HORSE 75-8780
Fits Toro 38170, 38171, 38172, 38173, 38175, 38176, 38177, 38178, 38182, 38183 CCR Powerlite Snowblowers
Width: 2-1/8"
Length: 15-3/8"
Three 1/4" mounting holes.

R718 IF-3011 Flat Idler Pulley w/Flange fits Bolens, MTD, Simplicity, Snapper, Toro & Gilson

R718 - IF-3011 Flat Idler Pulley w/Flange fits Bolens, MTD, Simplicity, Snapper, Toro & Gilson

List Price: $12.53
Our Price: $9.00
You save $3.53!

Replaces (OEM): ALLIS CHALMERS 118414
ALLIS CHALMERS 2029824
AYP 75673
AYP 76557
AYP 9178
CANADIANA 50793
FMC 172-9440
GILSON 7714
HUFFMAN 10890
LAWN-BOY 607978
LAWN-BOY 740890
MTD 756-0199
NOMA 313843
NOMA 46993
NOMA 50793
SIMPLICITY 118414
SIMPLICITY 118414SM
SIMPLICITY 2118414
SIMPLICITY 2118414SM
SNAPPER 3-0948
SNAPPER 7010948
TORO 7-0056
TROY BILT 1729440
TROY BILT 1751736

Specs: ID:3/8"
OD:2"
Height:7/8"
Double row of bearings with double sealed sides
Used by OEM's
For explanation of letters please refer to the drawing by clicking on More Info
A:2"
B: 1 7/8"
C: 3/8"
E: 1/2"
F: 11/32"
H: 1/16"
K: 3/4"
V: 7/8"

R728- IV-39A Idler Pulley

List Price: $10.83
Our Price: $9.25
You save $1.58!

Replaces OEM #:AMF/DYNAMARK/NOMA 45074
AYP/ROPER/SEARS 53018
BOLENS 171-0567
JOHN DEERE AM32672, AM103019
MASSEY FERGUSON 1040-013-M1
MTD 756-0116, 756-4209, 956-0116
TORO/WHEEL HORSE 3-4243, 8205
ID: 3/8"
OD: 3-1/16"
WIDTH: 11/16"

R722 FLAT IDLER PULLEY IF4812 (3/8" X 3-7/32")

List Price: $12.52
Our Price: $9.25
You save $3.27!

Replaces:
CASE/INGERSOLL C-13012
HAHN ECLIPSE 451293
MTD 756-0240
MTD 956-0240
OREGON 34-012
PRIME LINE 7-05206
PRIME LINE 7-05434
PRIME LINE 7-05435
PRIME LINE 7-05438
STENS 280-081
STENS 280-586
SUNBELT B1SB722
TORO/WHEEL HORSE 11-2426
TORO/WHEEL HORSE 2-4463

A: 3-7/32"
B: 3"
C: 3/8"
D: 3/4"
E: 1/2"
F: 11/32"
H: 1/16"
T: .060"

R723 FLAT IDLER PULLEY IF5212 (3/8" X 3-3/4")

List Price: $17.43
Our Price: $9.25
You save $8.18!

Replaces:
AYP/ROPER/SEARS 104679X
BOLENS 172-4488
CUB CADET 491395-R1
INTERNATIONAL 491395-R1
JOHN DEERE AM-41647
OREGON 34-015
PRIME LINE 7-05207
SIMPLICITY/ALLIS CHA 108386
SIMPLICITY/ALLIS CHA 2108386
SIMPLICITY/ALLIS CHA 2108386SM
STENS 280-099
STENS 280-578
SUNBELT B1SB723
TORO/WHEEL HORSE 11-2425
TORO/WHEEL HORSE 92-7101

A: 3-3/4"
B: 3-1/4"
C: 3/8"
D: 3/4"
E: 1/2"
F: 11/32"
H: 1/16"
T: .060"

120-360 Oil Filter fits Honda, John Deere, Kubota, Grasshopper, Hustler, Toro and more

120-360 Oil Filter Fits Honda, John Deere, Kubota, Grasshopper, Hustler, Toro and More

List Price: $13.09
Our Price: $9.25
You save $3.84!

Replaces (OEM): BOBCAT I.R.: 3974113B
BOBCAT I.R.: 6657635
GRASSHOPPER: 100805
HONDA: 15400-679-023
HONDA: 15400-POH-305
HONDA: 15410-MJ0-405
HONDA: 15410-MJO-004
HOWARD PRICE: 05364
JACOBSEN: 554011
JACOBSEN: 557759
JOHN DEERE: AM100750
JOHN DEERE: AM101378
JOHN DEERE: M801002
JOHN DEERE: M806418
JOHN DEERE: M806419
KUBOTA: 15241-32090
KUBOTA: 15841-32430
KUBOTA: 16271-32090
KUBOTA: 16271-32098
KUBOTA: 30401-37580
KUBOTA: 70000-15241
KUBOTA: 70000-74034
KUBOTA: HH150-32094
KUBOTA: HH150-32804
KUBOTA: HH152-32432
KUBOTA: HH160-32093
SCAG: 100800
SKYJACK: 119932
TORO: 104-5167
TORO: 108-3841
TORO: 42-9030
TORO: 99-8384
YANMAR: 129150-35150
YANMAR: 129150-35153

Fits Models: BOBCAT I.R.: Excavator: 56; 76; X220; X320 (with Kubota D722E engine); 443B (with Kubota D750B engine); 453 (with KUbota D750 engine); 463 (with Kubota D722-EB engine)
Skid Steer: 553; 443 (with Kubota D750B engine); 543; 543B (withKubota engine)
HONDA: EM5000 and water cooled engines
HOWARD PRICE:1260 with Yanmar engines
JOHN DEERE: 300, F912, 915, 925, 932, 935, 1445, 1545, 1565, 3245C Mowers, 7500, 8000 E-Cut and 8500 E-Cut Hybrid Fairway Mowers,
3215, 3215A, 3215B, 3225B, 3225C, 3235, 3235A, 3235B and 3235C Fairway Mowers, 7400 and 8800 Terrain Cut, 7200, 7500, 7700, 8500
and 8700 KUBOTA:B1550, B1700, B1750, B20, B21, B2100, B2150,B2320, B2400, B2410, B26, B2620, B2630, B2920, B4200, B5100, B5200, B6100,
B6200, B7100, B7500, B7510, B7610, B8200, B9200, BX22, BX2200, BX23, BX2660, F2000, F2100, F2100E, F2260,F2560, F2560E, F2680E, F2880-F

Specs: OD:3"
Height:3 1/8"
Micron:27
20MM x 1.5MM THD
11-14 PSI pressure relief
Anti-drain
Honda code 5038781

R719 IF-3612 Flat Idler Pulley w/Flange Fits Noma, Bolens, Case, MTD & Toro

R719 IF-3612 Flat Idler Pulley w/Flange Fits Noma, Bolens, Case, MTD & Toro

List Price: $10.47
Our Price: $9.75
You save $0.72!

Replaces OEM #: AMF/DYNAMARK/NOMA 27332
BOLENS 171-0556
CASE/INGERSOLL C-15672
HAHN ECLIPSE 451182
MTD 756-0137, 956-0137
TORO/WHEEL HORSE 3-4244
ID: 3/8"
OD: 2-15/32"
WIDTH: 3/4"
A: 2-15/32"
B: 2-1/4"
C: 3/8"
D: 3/4"
E: 1/2"
F: 11/32"
H: 1/16"
T: .050"

1108 - 14" High Lift Blade for Toro / Wheel Horse 6693

List Price: $12.86
Our Price: $9.75
You save $3.11!

Replaces OEM #: TORO/WHEEL HORSE 10-0200, HORSE 6693,
C. H. DIA: 3/4" X 5/8"
CENTER TO CENTER (OUTSIDE HOLES): 1-5/8"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 1/4"
LENGTH: 14"
THICKNESS: 0.1870"
WIDTH: 2"
Quantity discounts available on blade sets of 2 or more.

2001 - 16" Wheel Horse 106637 Blade

List Price: $12.88
Our Price: $9.75
You save $3.13!

Replaces OEM #: TORO/WHEEL HORSE 10-6637,
For 48" cut side discharge.
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 16"
THICKNESS: 0.1870"
WIDTH: 2"
Quantity discounts available on blade sets of 2 or more.

R10090 Snowthrower Belt replaces Toro 71-5381

R10090 Snowthrower Belt replaces Toro 71-5381

List Price: $12.24
Our Price: $9.99
You save $2.25!

Replaces (OEM): TORO 71-5380
Fits Toro 38190, 38195, 38196 CCR1000 Snowblower Models
Application: Drive
Type: Raw edge Aramid Fiber
Length: 34 1/2"
Width: 3/8"

R10210 Snowblower Belt replaces Toro 26-9672

R10210 Snowblower Belt replaces Toro 26-9672

List Price: $12.94
Our Price: $9.99
You save $2.95!

Replaces (OEM): TORO/WHEEL HORSE 26-9672.
Fits Toro snowblower models 622 & 724.
Raw edge, polyester cord construction.
Width: 1/2" (12.70mm)
Length: 30" (762mm)

R8887 Blade Brake Belt replaces Toro 42-0884

R8887 Blade Brake Belt replaces Toro 42-0884

List Price: $12.24
Our Price: $9.99
You save $2.25!

Replaces (OEM): Toro/Wheel Horse 42-0884
Fits Models: Fits Toro Homeowner models 20624, 20684, 20695.
LENGTH: 23-59/64"
WIDTH: 1/2"
Raw edge, Aramid fiber cogged belt

R12687 Auger Belt replaces Toro 75-9010

List Price: $13.01
Our Price: $9.99
You save $3.02!

Replaces (OEM): Toro 75-9010
Fits Toro 38175 Power Lite Snowblowers 1997-2010
Raw Edge Aramid Cord Construction
Width: 3/8" (10.70mm)
Length: 29.2180" (742.1)

R2000 - 13 7/8" Blade Replaces Toro/Wheel Horse 106077

List Price: $14.58
Our Price: $10.00
You save $4.58!

Replaces OEM #:TORO/WHEEL HORSE 11-7192,
For 42" cut side discharge.
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 13-7/8"
THICKNESS: 0.1870"
WIDTH: 2"

R813 Roller Bearing with Race

List Price: $11.55
Our Price: $10.00
You save $1.55!

Replaces (OEM): ARIENS 05404500, 05405500, 54045
AYP/ROPER/SEARS 1553H, 1554H
BEARING LM11910, LM11949
BOLENS 118-5275
CUB CADET 651814-R1, 651815-R91, 941-04089
EXMARK 1-633585
FERRIS 5022631SX2
GILSON 1044, 1140
JOHN DEERE 8188, 8226, JD-8188, JD-8226
MASSEY FERGUSON 831-054-M1, 831-055-M1
SCAG 482621
SIMPLICITY/ALLIS CHA 154393, 154486, 2154393, 2154393SM, 2154486, 2154486SM
SNAPPER/KEES 1-2931
TORO/WHEEL HORSE 254-78, 254-79
HEIGHT: 21/32"
ID: 3/4"
OD: 1-25/32"

5525 Toro 71-5390 Scraper Bar for snowblower model

5525 - Toro 71-5390 Scraper Bar for snowblower model CCR1000

List Price: $12.01
Our Price: $10.00
You save $2.01!

Replaces (OEM): TORO/WHEEL HORSE 71-5390
Fits Toro 38190, 38195, 38196 CCR1000 Snowblower Models
Width: 2-1/8"
Length: 19-5/8"
Three 1/4" mounting holes.

10928 - 20-27/32" TORO/WHEEL HORSE 108-3762-03, 93-4106-03 Blade. Fits 21" Recycler

List Price: $15.28
Our Price: $10.00
You save $5.28!

Replaces OEM #: TORO/WHEEL HORSE 108-3762-03, 93-4106-03
Fits 21" Toro Recycler Walkbehind mower.
C. H. DIA: 7/16"
LENGTH: 20-27/32"
THICKNESS: 0.0150"
WIDTH: 2-1/4"
Quantity discounts available on blade sets of 2 or more.

5515 Scraper Bar replaces Toro 23-3170 for models S-200 and 620

5515 Scraper Bar replaces Toro 23-3170 for models S-200 and 620

List Price: $14.52
Our Price: $10.00
You save $4.52!

Replaces (OEM): TORO/WHEEL HORSE 23-3170
Fits TORO models S-200 and 620
Width: 1-7/8"
Length: 19-5/8"
Three 1/4" mounting holes.

R721 FLAT IDLER PULLEY IF4414 (3/8" X 3-1/4")

List Price: $29.67
Our Price: $10.25
You save $19.42!

Replaces
AMF/DYNAMARK/NOMA 40223
BOLENS 171-3803
GILSON 6588
OREGON 34-009
PRIME LINE 7-05205
SIMPLICITY/ALLIS CHA 154534
SIMPLICITY/ALLIS CHA 156124
SIMPLICITY/ALLIS CHA 1610191
SIMPLICITY/ALLIS CHA 2154534
SIMPLICITY/ALLIS CHA 2154534SM
SIMPLICITY/ALLIS CHA 2156124
SIMPLICITY/ALLIS CHA 2156124SM
STENS 280-065
SUNBELT B1SB721
TORO/WHEEL HORSE 10-5874

A: 3-1/4"
B: 2-3/4"
C: 3/8"
D: 7/8"
E: 5/8"
F: 11/32"
H: 1/8"
T: .050"

120-471 Oil Filter fits GRASSHOPPER 100850/FERRIS 50210681X1/HUSTLER 768341/SNAPPER 7042715/WRIGHT MFG 34490002

120-471 Oil Filter Fits Grasshopper 100850/Ferris 50210681X1/Hustler 768341/Snapper 7042715/Wright 34490002

List Price: $12.14
Our Price: $10.25
You save $1.89!

FERRIS 50210681X1
GRASSHOPPER 100850
HUSTLER 768341
SNAPPER 7042715
WRIGHT MFG 34490002

GRASSHOPPER 700 series Gemini Transmission and 618
Specs: OD:3"
Height:3 1/2"
Micron:13
Thread Size:3/4" -16
Shorter version of OEM
U.S. Made

73-038 Snowblower Skid replaces Toro 40-8160-01 fits 522, 622, 724 & 824

73-038 Snowblower Skid replaces Toro 40-8160-01 fits 522, 622, 724 & 824

List Price: $12.37
Our Price: $10.25
You save $2.12!

Replaces (OEM): TORO 40-8160 supersedes to 40-8160-01

Fits The following Toro Snowblower Models:
38051, 522 Snowthrower, 2000 (SN 000000001-000999999)
38051, 522 Snowthrower, 2000 (SN 200000001-200999999)
38051, 522 Snowthrower, 2001 (SN 210000001-210999999)
38053, 824 Power Throw Snowthrower, 2003 (SN 230000001-230999999)
38062, 622 Snowthrower, 1997 (SN 7900001-7999999)
38062, 622 Snowthrower, 1998 (SN 8900001-8999999)
38062, 622 Snowthrower, 1999 (SN 9900001-9999999)
38063, 622 Power Throw Snowthrower, 2002 (SN 220000001-220999999)
38063, 622 Power Throw Snowthrower, 2003 (SN 230000001-230999999)
38063, 622 Snowthrower, 1997 (SN 7900001-7999999)
38063, 622 Snowthrower, 1998 (SN 8900001-8999999)
38063, 622 Snowthrower, 1999 (SN 9900001-9999999)
38063, 622 Snowthrower, 2000 (SN 000000001-000999999)
38063, 622 Snowthrower, 2000 (SN 200000001-200999999)
38063, 622 Snowthrower, 2001 (SN 210000001-210999999)
38064, 622 Power Throw Snowthrower, 2002 (SN 220000001-220999999)
38064, 622 Power Throw Snowthrower, 2003 (SN 230000001-230999999)
38064, 622 Snowthrower, 2000 (SN 200000001-200999999)
38064, 622 Snowthrower, 2001 (SN 210000001-210999999)
38072, 724 Snowthrower, 1999 (SN 9900001-9999999)
38072, 724 Snowthrower, 2000 (SN 200000001-200999999)
38073, 724 Snowthrower, 1999 (SN 9900001-9999999)
38078, 824 Power Throw Snowthrower, 2003 (SN 230000001-230999999)
38605, 522 Power Throw Snowthrower, 2007 (SN 270000001-270004504)
38605, 522 Power Throw Snowthrower, 2007 (SN 270004505-270999999)
38605, 522 Power Throw Snowthrower, 2008 (SN 280000001-280999999)
38605, 522 Power Throw Snowthrower, 2009 (SN 290000001-290999999)
38606, 622R Power Throw Snowthrower, 2007 (SN 270000001-270999999)
38606, 622R Power Throw Snowthrower, 2008 (SN 280000001-280999999)
38606, 622R Power Throw Snowthrower, 2009 (SN 290000001-290999999)
38607, 622E Power Throw Snowthrower, 2007 (SN 270000001-270999999)
38607, 622E Power Throw Snowthrower, 2008 (SN 280000001-280999999)
38607, 622E Power Throw Snowthrower, 2009 (SN 290000001-290999999)
38010, 421 Snowthrower, 1981 (SN 1000001-1999999)
38015, 421 Snowthrower, 1981 (SN 1000001-1999999)
38015, 421 Snowthrower, 1982 (SN 2000001-2999999)
38015, 421 Snowthrower, 1983 (SN 3000001-3999999)
38035, 3521 Snowthrower, 1984 (SN 4000001-4999999)
38035, 3521 Snowthrower, 1985 (SN 5000001-5999999)
38035, 3521 Snowthrower, 1986 (SN 6000001-6999999)
38035, 3521 Snowthrower, 1987 (SN 7000001-7999999)
38035, 3521 Snowthrower, 1988 (SN 8000001-8999999)
38035, 3521 Snowthrower, 1989 (SN 9000001-9999999)
38052, 521 Snowthrower, 1984 (SN 4000001-4999999)
38052, 521 Snowthrower, 1985 (SN 5000001-5999999)
38052, 521 Snowthrower, 1986 (SN 6000001-6999999)
38052, 521 Snowthrower, 1987 (SN 7000001-7999999)
38052, 521 Snowthrower, 1988 (SN 8000001-8999999)
38052, 521 Snowthrower, 1989 (SN 9000001-9999999)
38052, 521 Snowthrower, 1990 (SN 0000001-0999999)
38052, 521 Snowthrower, 1991 (SN 1000001-1999999)
38052, 521 Snowthrower, 1992 (SN 2000001-2999999)
38052, 521 Snowthrower, 1993 (SN 39000001-39999999)
38052, 521 Snowthrower, 1994 (SN 4900001-4999999)
38052, 521 Snowthrower, 1995 (SN 59000001-59999999)
38052, 521 Snowthrower, 1996 (SN 69000001-69999999)
38052C, 521 Snowthrower, 1988 (SN 8000001-8999999)
38052C, 521 Snowthrower, 1989 (SN 9000001-9999999)
38054, 521 Snowthrower, 1990 (SN 0000001-0999999)
38054, 521 Snowthrower, 1991 (SN 1000001-1999999)
38054, 521 Snowthrower, 1992 (SN 2000001-2999999)
38054, 521 Snowthrower, 1993 (SN 3900001-3999999)
38054, 521 Snowthrower, 1994 (SN 4900001-4999999)
38054, 521 Snowthrower, 1995 (SN 5900001-5999999)
38054, 521 Snowthrower, 1996 (SN 6900001-6999999)
38056, 521 Snowthrower, 1984 (SN 4000001-4999999)
38056, 521 Snowthrower, 1985 (SN 5000001-5999999)
38056, 521 Snowthrower, 1986 (SN 6000001-6999999)
38056, 521 Snowthrower, 1987 (SN 7000001-7999999)
38056, 521 Snowthrower, 1988 (SN 8000001-8999999)
38056, 521 Snowthrower, 1989 (SN 9000001-9999999)
38056, 521 Snowthrower, 1990 (SN 0000001-0999999)
38056, 521 Snowthrower, 1991 (SN 1000001-1999999)
38056C, 521 Snowthrower, 1988 (SN 8000001-8999999)
38056C, 521 Snowthrower, 1989 (SN 9000001-9999999)
38056C, 521 Snowthrower, 1990 (SN 0000001-0999999)
38072, 724 Snowthrower, 1993 (SN 3900001-3999999)
38072, 724 Snowthrower, 1994 (SN 4900001-4999999)
38072, 724 Snowthrower, 1995 (SN 5900001-5999999)
38072, 724 Snowthrower, 1996 (SN 6900001-6999999)
38072, 724 Snowthrower, 1997 (SN 7900001-7999999)
38072, 724 Snowthrower, 1998 (SN 8900001-8999999)
38073, 724 Snowthrower, 1993 (SN 3900001-3999999)
38073, 724 Snowthrower, 1994 (SN 4900001-4999999)
38073, 724 Snowthrower, 1995 (SN 5900001-5999999)
38073, 724 Snowthrower, 1996 (SN 6900001-6999999)
38073, 724 Snowthrower, 1997 (SN 7900001-7999999)
38073, 724 Snowthrower, 1998 (SN 8900001-8999999)
38250, 421 Snowthrower, 1981 (SN 1000001-1999999)

5" L x 2-3/4" W
Slots size: 5/16" W x 1-5/8" L
Slots are 2" center to center

Quantity Discounts Available

R6326 - 15-1/2" Toro 92-7952 Blade

List Price: $15.28
Our Price: $10.50
You save $4.78!

Replaces OEM #:TORO/WHEEL HORSE 92-7952,
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 15-1/2"
THICKNESS: 0.1870"
WIDTH: 2-1/2"
Takes (3) blades for 44" cut.
Quantity discounts available on blade sets of 2 or more.

R9861 Snowblower Section Belt for Toro 55-9300

R9861 Snowblower Section Belt for Toro 55-9300

List Price: $15.20
Our Price: $10.50
You save $4.70!

Replaces (OEM): TORO/WHEEL HORSE 55-9300
Fits model CCR2000. Poly-ribbed belt.
Width: 3/8" (9.53mm)
Length: 34" (863.6mm)

7162 - Toro/Wheel Horse 113514 Bearing

List Price: $14.00
Our Price: $10.50
You save $3.50!

Bearing replaces Toro/Wheel Horse 113514.
Fits Wheel Horse 50" & 60" cut Zero Turn 500 series mowers.
Fits Grasshopper 33210.
Also fits Snapper 19572, 79813, Zero Turn 42", 48" & 60" decks.
Bearing No. 6205-RS, sealed one side.
Size: ID 63/64", OD 2-3/64", Height 19/32"

729 IV-40 Idler Pulley

List Price: $16.88
Our Price: $10.50
You save $6.38!

Replaces OEM #: IV-40, AYP 75672, AYP 016-176, Bolens 1727978, Case 23456, FMC 172-7978, Gilson 23486, Huffy 9992, Jacobsen 325267, Massey Ferguson 1023-556-M91, MTD 756-0166, Noma 47781, Noma 53243, Rugg 10858, Snapper 1-4208, Toro/Wheel Horse 110370, Toro/Wheel Horse 12-5820
A: 2-5/8"
B: 1-3/4"
C: 3/8"
D: 19/32"
E: 1/2"
F: 11/32"
H: 3/16"
T: .060"

R6137 - 10-1/2" Toro 72-7690 Blade

List Price: $15.28
Our Price: $10.75
You save $4.53!

Replaces OEM #:TORO/WHEEL HORSE 72-7690,
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 10-1/2"
THICKNESS: 0.1340"
WIDTH: 2-1/2"
Takes (1) R6135, (1) R6136 and (1) R6137.
Quantity discounts available on blade sets of 2 or more.

R3441 - 15-1/2" Toro/Wheel Horse 54-0010 Blade

List Price: $13.24
Our Price: $10.99
You save $2.25!

Replaces OEM #:TORO/WHEEL HORSE 54-0010-03,
Takes (3) blades for 44" cut Deck 57358,
Groundsmaster model 117 and 1144 rider tractor.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 15-1/2"
THICKNESS: 0.1870"
WIDTH: 2-1/2"
Quantity discounts available on blade sets of 2 or more.

R7952 Snowblower Drive Belt for TORO 25-6430

R7952 Snowblower Drive Belt for TORO 25-6430

List Price: $15.70
Our Price: $10.99
You save $4.71!

Replaces (OEM): TORO 25-6430
Fits Models: FITS TORO SNOWMASTER S200 & S620
Application: Drive
LENGTH: 33"
WIDTH: 3/32"
Type: Multi-ribbed

R727 FLAT IDLER PULLEY IF-6416 (3/8" X 4-1/2")

List Price: $13.25
Our Price: $10.99
You save $2.26!

Replaces:
CASE/INGERSOLL C-15343
JOHN DEERE AM-121238
JOHN DEERE AM-35590
OREGON 34-020
PRIME LINE 7-05211
PRIME LINE 7-05444
STENS 280-131
STENS 280-495
SUNBELT B1SB727
TORO/WHEEL HORSE 11-2895
TORO/WHEEL HORSE 93-1622
A: 4-1/2"
B: 4"
C: 3/8"
D: 1"
E: 5/8"
F: 11/32"
H: 1/16"
T: .040"
FITS JOHN DEERE & WHEEL HORSE

R7278 - Toro/Wheel Horse 46-5650 Idler Pulley

R7278 - Toro/Wheel Horse 46-5650 Idler Pulley

List Price: $18.39
Our Price: $10.99
You save $7.40!

FITS ALL TORO 21" BBC MODELS.
ID: 1"
OD: 2-7/8"
WIDTH: 27/32"

5524 Toro 55-8760 Scraper Bar for Snowblower models CCR2000, CCR2400, CCR2450, CCR2500, CCR3000, CCR3600 & CCR3650

5524 - Scraper Bar replaces for Snowblower models CCR2000, CCR2400, CCR2450, CCR2500, CCR3000, CCR3600 & CCR3650

List Price: $18.59
Our Price: $10.99
You save $7.60!

Replaces (OEM): TORO/WHEEL HORSE 55-8760
Fits models CCR2000, CCR2400, CCR2450, CCR2500, CCR3000, CCR3600 & CCR3650
Width: 1-15/16"
Length: 19-1/8"
7/8" X 7/8" notch on one end
3 mounting holes on 8 1/2" centers

10173 - 18" X 5/8" Flat Blade

List Price: $18.24
Our Price: $10.99
You save $7.25!

REPLACES OEM: BOBCAT/RANSOM 32022A, BUNTON-GOODALL PL4206, ENCORE 363291, 482462,
EXMARK 1-303146, FERRIS 1521227, GREAT DANE D18037, HUSQVARNA 77344,
LESCO 050140, SCAG 48185, TORO/WHEEL HORSE 55-4210.
(2) BLADES FOR 36" CUT, (3) BLADES FOR 52" & 54" CUT
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Sharpened - 4-sides.
Quantity discounts available on blade sets of 2 or more.

11821 - 21-43/64" Standard Blade Replaces Toro 106-2247-03

List Price: $18.58
Our Price: $10.99
You save $7.59!

Replaces OEM #:TORO/WHEEL HORSE 106-2247-03, 110-6568-03, 110-1857-03
Fits model Time cutter Z.
Takes (2) blades for a 42" cut.
C. H. DIA: 5/8"
LENGTH: 21-43/64"
THICKNESS: 0.1600"
WIDTH: 2-1/4"
Quantity discounts available on blade sets of 2 or more.

265-533 Auger Drive Belt replaces Toro 37-9080

S265-533 Auger Drive Belt replaces Toro 37-9080

List Price: $14.89
Our Price: $10.99
You save $3.90!

Replaces (OEM): TORO 37-9080
Fits Models: TORO 3521, 421, 521 and 522 snowthrowers
Application: Auger Drive
Length: 29 3/4"
Type:C ogged
Width: 3/8"

R851 - 14-1/2" Wheel Horse 10610 Blade

Our Price: $11.25

Replaces OEM #: TORO/WHEEL HORSE 14-4879, 79-2920,
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 14-1/2"
THICKNESS: 0.2040"
WIDTH: 2"
Takes (3) blades for 42" cut.
Rear discharge WH set 106635
Quantity discounts available on blade sets of 2 or more.

S280-032 MTD 756-0137 Flat Idler for MTD 225, 440, 450, 550, 552, 586, 588 (1987-88) series snowthrowers

S280-032 Flat Idler replaces MTD 756-0137 for 225, 440, 450, 550, 552, 586, 588 (1987-88) series snowthrowers

List Price: $13.96
Our Price: $11.25
You save $2.71!

Replaces (OEM): AYP 4933H, 78744
CASE C15672, C23535
FMC 171-0566
HAHN 27829, 451182
MTD 756-0137
NOMA 27332
SNAPPER 1-3850, 7013850
TORO 3-4244, MW8821
TROY BILT 1710566, 1710567, 756-1207
WHITE 1710566
YARDMAN 1626-69

Fits Models: MTD 225, 440, 450, 550, 552, 586, 588 (1987-88) series snowthrowers
ID: 3/8"
OD: 2 1/2"
Height: 7/8"
2 15/32" OD flange

R6680- TRANSMISSION OIL FILTER FOR CUB CADET/ BOLENS/ JOHN DEERE/ MTD/ ONAN/ SIMPLICITY/ TORO

R6680- TRANSMISSION OIL FILTER FOR CUB CADET/ BOLENS/ JOHN DEERE/ MTD/ ONAN/ SIMPLICITY/ TORO

List Price: $12.65
Our Price: $11.25
You save $1.40!

Replaces; BOLENS 172-6450, CUB CADET 723-3014, CUB CADET 923-3014, JOHN DEERE AM-35176, MTD 727-0162, MTD 927-0162,
ONAN 122-0185, OREGON 83-300, PRIME LINE 18-7878, SIMPLICITY/ALLIS CHA 1650954, SIMPLICITY/ALLIS CHA 1650954SM,
SIMPLICITY/ALLIS CHA 171439, STENS 120-265, STENS 120-519, SUNBELT B1WH35, TORO/WHEEL HORSE 10-8335 &
TORO/WHEEL HORSE 79-5270.
25/30 Micron

S120-519 Oil Filter fits Bobcat, Cushman, Gravely, Howard Price, Jacobsen, John Deere, Kubota, Lesco, MTD, Onan, Simplicity, Toro and Troybilt

S120-519 Oil Filter fits Bobcat, Cushman, Gravely, Howard Price, Jacobsen, John Deere, Kubota, Lesco, MTD, Onan, Simplicity, Toro and Troybilt

List Price: $15.48
Our Price: $11.25
You save $4.23!

Replaces (OEM): BOBCAT I.R. 6675517
BOBCAT I.R. 6678233
CUSHMAN 111836
GRAVELY 039306
HOWARD PRICE 6033
JACOBSEN 130555
JOHN DEERE AM35176
KUBOTA 1C010-32430
KUBOTA 1C020-32430
KUBOTA HH164-32430
KUBOTA HH1C0-32430
LESCO 050487
MTD 727-0162
ONAN 122-0185
SIMPLICITY 1650954
SIMPLICITY 171439
TORO 104-5169
TORO 23-2300
TROY BILT 1719859
TROY BILT 1726450

Fits Models: BOBCAT I.R. Skid Steer: 645; 1600 (with Kubota engine); 643 (with Kubota V1402B engine); 743 (with Kubota V1702 engine); 743DS (with Kubota V1702 engine); 751, 751G (with Kubota V1903 engine);753; 763; 763G; 773; 773G; 7753 (with KubotaV2203 engine); 800 (with Deutz A220 engine);S130, S150, S160, S175, S185 (with Kybota V2203TE engine); S220; S250 (with Kubota V3300Tengine); T180; T190; T250; T300
Excavator: 225; 231; 325; 328; X325; Kubota D1703E engine; 331; 430 ZHS; 435 ZHS (with Kubota V2203 engine); 331E; 334; 341; X331 Kubota V2203E engine; 337; 341; X337 (with Kubota V2203EBengine); X225; X231
CUSHMAN 60" and 72" units and Truckster
HOWARD PRICE Hydro units
JACOBSEN Hydro units
MTD Hydro units
ONAN JA, JB, JC and JF
SIMPLICITY Sunstrand Hydro units
TROY BILT 1455, 1476, 1477, 166, 1660, 1666, 1886, 194,197, 198, 2086, 2087, QT-16, 13060, 13062, 13074, 13076 LTX hydro garden tractors and 13101 GTX hydro garden tractors
Specs: OD:3 3/4"
Height:3 13/16"
Micron:28
Thread Size:3/4" -16
8-11 PSI pressure relief
Anti-drain
U.S. Made

719 - Flat Idler replaces MTD 756-0137. Also fits Toro and Snapper

719 - Flat Idler replaces MTD 756-0137. Also fits Toro and Snapper

List Price: $13.96
Our Price: $11.25
You save $2.71!

Replaces (OEM): MTD 756-0137
SNAPPER 1-3850, 7013850
TORO 3-4244
Fits Models: MTD 225, 440, 450, 550, 552, 586, 588 (1987-88) series snowthrowers
TORO 3521, 421, 522, 524, 526, 622, 724, 726, 824XL, 826, 924, 1132, 1332
ID: 3/8"
OD: 2 1/2"
Height: 3/4"

R2060 - 18" 33-0490 Toro Rear Bagger Blade

List Price: $15.80
Our Price: $11.50
You save $4.30!

Replaces OEM #:TORO/WHEEL HORSE 33-0490,
Toro rear bagger and Grassmaster.
C. H. DIA: 7/16"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.1250"
WIDTH: 2-5/8"
Quantity discounts available on blade sets of 2 or more.

R3361 - 18" Toro/Wheel Horse 27-0990 Blade

List Price: $14.26
Our Price: $11.50
You save $2.76!

Replaces OEM #:TORO/WHEEL HORSE 27-0990,
Takes ((3) blades for 52" cut Groundsmaster
C. H. DIA: 1/2"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.1870"
WIDTH: 2-1/2"
Quantity discounts available on blade sets of 2 or more.

S120-265 Oil Filter fits Ariens, Bobcat, Cub Cadet, Hitachi, John Deere and Toro

S120-265 Oil Filter fits Ariens, Bobcat, Cub Cadet, Hitachi, John Deere and Toro

List Price: $13.15
Our Price: $11.50
You save $1.65!

Replaces (OEM): ARIENS 03192800
BOBCAT 48045B
CUB CADET IH-395789-R2
CUB CADET 723-3014
CUB CADET 923-3014
HITACHI AM39653
JOHN DEERE AM39653
TORO 108335
TORO 79-5270
Fits Models:
ARIENS Hydro series
BOBCAT XM and 700 hydro series
CUB CADET 1250, 1450 and 1862
GRAVELY Pro Master 400
HITACHI Loader: LX120 and LX150 with Hino EP100T eng;LX120-2, LX150-3, LX150-5, LX230-3 and LX230-5 with John Deere Eng; LX150-2 with John Deere 6076 eng; LX150-2 with John Deere 6081 eng; LX150-2 with Nissan NE6 eng.
JOHN DEERE Front mount mowers F911, F912, F915, F925, F932 and F935; Z-trak mowers F620, F680, F687,F737 and F757; lawn tractors 230, 140, 300, 312, 314, 316, 317, 318, 322, 330, 332, 400, 420 and 430.Loaders: 444J, 444H LL and 444HTC with 4045T Powertech Eng; 544H, 544H LL, 544HTC and624H with 6068 Powertech Eng; 544J and 624Jwith 6068H eng; 624G with 6068T eng; 644G with 6076 eng; 644J and 724J with 6081 Powertecheng; 644J with 6081H eng; 744H with 6125A Powertech eng; 744J, 824J and 844J with 6125 Powertech eng.
TORO 300, 400 and 500 hydro series
OD: 3 1/2"
Height: 3 3/4"
Micron: 16
Thread Size: 3/4" -16
U.S. Made

10929 - 21-23/32" Blade Replaces Toro 104-8697-03 Fits 22" Recycler

List Price: $15.28
Our Price: $11.50
You save $3.78!

Replaces OEM #: TORO/WHEEL HORSE 104-8697-03
Fits 22" Recycler
Walk Behind Mowers
C. H. DIA: 7/16"
LENGTH: 21-23/32"
THICKNESS: 0.1500"
WIDTH: 2-1/4"
Quantity discounts available on blade sets of 2 or more.