|
|
|
|
|
|
R8448 LOCK NUT FOR SNAPPER
|
Our Price: $0.29
|
|
|
REPL SNAPPER 1-1201
Also fits hub 10-7885 & 10-7886
|
|
|
|
|
|
|
|
|
|
R5706 SNAP RING
|
|
Our Price: $0.32
|
|
|
R5706 SNAP RING
REPLACES BUNTON PLO410
RANSOMES/BOBCAT 64144-12
1" Snap Ring
|
|
|
|
|
|
|
|
|
|
R11076 HEX NUT FOR SCAG
|
|
Our Price: $0.33
|
|
|
R11076 HEX NUT FOR SCAG
REPL SCAG 0421-07
Also fits 10-11040 & 10-11041 wheel bolts
|
|
|
|
|
|
|
|
|
|
R440 FELT WASHER FOR LAWNBOY
|
List Price: $0.58
Our Price: $0.35
You save $0.23!
|
|
|
REPL LAWNBOY 605255
|
|
|
|
|
|
|
|
|
|
R8493 WASHER FOR SNAPPER
|
|
Our Price: $0.39
|
|
|
REPL SNAPPER 1-0935
Fits 25", 26", 28", 30" & 33" rear
engine riders. Also used in 10-8322 front end repair kit.
3/4" ID x 1-1/8" OD x 1/16" Thickness
|
|
|
|
|
|
|
|
|
|
R321 LOCK NUTS-COARSE
|
|
Our Price: $0.39
|
|
|
R321 LOCK NUTS-COARSE 3/8"
|
|
|
|
|
|
|
|
|
|
R8653 LOCK NUT
|
List Price: $0.43
Our Price: $0.39
You save $0.04!
|
|
|
Fits Velke 9x350x4 caster wheel on all one wheel Velkes.
1/2"-20
|
|
|
|
|
|
|
|
|
|
R8412- WHEEL WASHER FOR BUNTON & HONDA
|
|
Our Price: $0.44
|
|
|
REPLACES BUNTON Z35010
Also fits our wheel assembly R8575,
BUNTON 36", 48", 52" & 61" midsize front cut riders.
HONDA HRC 7013, 36" & 48" midsize.
REPLACES HONDA 4034054, 4034062, 4034112, and 4033106.
|
|
|
|
|
|
|
|
|
|
R12565- 3/8-16 AXLE NUT FOR EXMARK
|
|
Our Price: $0.45
|
|
|
Replaces EXMARK 3296-39
3/8"-16, used in our R12016 & R12018 deck wheel kits.
|
|
|
|
|
|
|
|
|
|
R11565 BLADE BOLT NUT FOR SCAG
|
|
Our Price: $0.47
|
|
|
R11565 BLADE BOLT NUT FOR SCAG
REPL SCAG 04020-09
5/8" x 11
Used with blade bolt 10-8343
|
|
|
|
|
|
|
|
|
|
R329- NYLON WHEEL BUSHING 1/2 X 5/8
|
|
Our Price: $0.50
|
|
|
Replaces OREGON 45-080, STENS 215-160 & SUNBELT B1SB329.
ID 1/2", OD 5/8", Height 5/8", Flange OD 3/4" nylon
|
|
|
|
|
|
|
|
|
|
R8447 WHEEL BOLT NUT FOR TORO/ EXMARK
|
List Price: $1.42
Our Price: $0.70
You save $0.72!
|
|
|
REPL TORO 32153-5
REPL EXMARK 804509
Fits our wheel bolt R8411 & R8419
|
|
|
|
|
|
|
|
|
|
R12564- 3/8-24X2 AXLE SCREW FOR EXMARK
|
|
Our Price: $0.79
|
|
|
Replaces EXMARK 3211-46
3/8"-24 x 2. Used in our R12016 & R12018 deck wheel kits.
Grade 8
|
|
|
|
|
|
|
|
|
|
R331- STEEL WHEEL BUSHING 7/16 X 1/2
|
|
Our Price: $0.83
|
|
|
Replaces STENS 215-186 & SUNBELT B1SB331.
7/16" (11.11 mm) ID x 1/2" (12.70 mm) OD sleeve, 2-3/16" (55.56 mm) Length.
|
|
|
|
|
|
|
|
|
|
R8304 IDLER ARM SPACER FOR SCAG
|
|
Our Price: $0.87
|
|
|
R8304 IDLER ARM SPACER FOR SCAG
REPL SCAG 48100-05 32", 36", 40", 48", 52", 61", and 72" decks.
3/4" ID x 7/8" OD x 1/2" Height
|
|
|
|
|
|
|
|
|
|
R5705 HEX NUT FOR BUNTON
|
|
Our Price: $0.87
|
|
|
REPL BUNTON Z32008.
|
|
|
|
|
|
|
|
|
|
R332- STEEL WHEEL BUSHING 1/2 X 5/8
|
|
Our Price: $0.87
|
|
|
Replaces STENS 215-194 & SUNBELT B1SB332.
1/2" (12.70 mm) ID x 5/8" (15.88 mm) OD sleeve, 3-1/4" (82.55 mm) Length.
|
|
|
|
|
|
|
|
|
|
R330- STEEL WHEEL BUSHING 3/8 X 1/2
|
|
Our Price: $0.87
|
|
|
Replaces STENS 215-178 & SUNBELT B1SB330.
3/8" (9.53 mm) ID x 1/2" (12.70 mm) OD sleeve, 2-3/16" (55.56 mm) Length.
|
|
|
|
|
|
|
|
|
|
R368 - Short Valve Stem, Core And Cap (TR-412)
|
List Price: $1.25
Our Price: $0.90
You save $0.35!
|
|
|
Short valve stem, core and cap (TR-412).
Replaces OEM #: TR-412
|
|
|
|
|
|
|
|
|
|
R364 - Long Valve Stem, Core And Cap (TR-413)
|
List Price: $1.25
Our Price: $0.90
You save $0.35!
|
|
|
Long valve stem, core and cap (TR-413).
Replaces OEM #: TR-413
|
|
|
|
|
|
|
|
|
|
R10559 HEX NUT FOR DIXIE CHOPPER
|
List Price: $1.15
Our Price: $0.90
You save $0.25!
|
|
|
R10559 HEX NUT FOR DIXIE CHOPPER
REPL DIXIE CHOPPER N-167
Used in Dixie Chopper 10161 & 10161L spindle assemblies.
1 per assembly, 3 per unit.
1" ID x 1-1/2" OD
|
|
|
|
|
|
|
|
|
|
R12268 BLADE BAR BOLT FOR SNAPPER
|
List Price: $1.09
Our Price: $0.95
You save $0.14!
|
|
|
R12268 BLADE BAR BOLT FOR SNAPPER
REPLACES SNAPPER 7090419
Used with blade 17-5847
1/2"-20 x 1-1/4"
|
|
|
|
|
|
|
|
|
|
R9009 - Retainer Bushing For Dixon
|
List Price: $1.22
Our Price: $0.98
You save $0.24!
|
|
|
Retainer bushing only for Dixon. Used on Dixon 8180 wheel assembly. OD 1-1/2" (38.10 mm), ID 1" (25.40 mm).
Size: ID 1", OD 1-1/2"
|
|
|
|
|
|
|
|
|
|
R311 - 1-5/16" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
R311 WHEEL BOLT
1-5/16"
|
|
|
|
|
|
|
|
|
|
R312 - 1-3/8" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
R312 WHEEL BOLT
1-3/8"
|
|
|
|
|
|
|
|
|
|
R313 - 1-7/16" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
R313 WHEEL BOLT
1-7/16"
|
|
|
|
|
|
|
|
|
|
R314 - 1-1/2" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
R314 WHEEL BOLT
1-1/2"
|
|
|
|
|
|
|
|
|
|
R315 - 1-9/16" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
R315 WHEEL BOLT
1-9/16"
|
|
|
|
|
|
|
|
|
|
R316 - 1-5/8" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
|
|
|
|
|
|
|
|
|
|
R317 - 1-3/4" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
|
|
|
|
|
|
|
|
|
|
R318 - 1-7/8" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
|
|
|
|
|
|
|
|
|
|
R319 - 2" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
|
|
|
|
|
|
|
|
|
|
R320 - 2-1/4" WHEEL BOLT
|
List Price: $1.10
Our Price: $0.99
You save $0.11!
|
|
|
|
|
|
|
|
|
|
|
|
|
R2943 - 7/16" X 29/32" Mclane 1002 Wheel Bearing
|
List Price: $1.25
Our Price: $1.00
You save $0.25!
|
|
|
Replaces McLane Wheel Bearing 1002. Replacement bearings for O.E.M. Wheels.
Replaces OEM #: 1002
Size: ID 7/16", OD 29/32", Height 9/16"
|
|
|
|
|
|
|
|
|
|
R9672 Wheel plastic 7" FLYMO (export only)
|
|
Our Price: $1.05
|
|
|
7" plastic wheel replaces Flymo 5127517. 7" wheel 1-1/2" (38mm) hub. .475" (12.1mm) center hole.
Black hub cover. Used with our inside hub cover 07-9672 (EXPORT ONLY)
|
|
|
|
|
|
|
|
|
|
R9675 Wheel plastic 8" FLYMO (export only)
|
|
Our Price: $1.05
|
|
|
8" plastic wheel replaces Flymo 5127517. 8" wheel 1-1/2" (38mm) hub. .475" (12.1mm) center hole.
Black hub cover. Used with our inside hub cover 07-9672 (EXPORT ONLY)
|
|
|
|
|
|
|
|
|
|
R7886 HUB BOLT FOR SNAPPER (LONG)
|
|
Our Price: $1.06
|
|
|
REPL SNAPPER 11013
For right hand side used with 08-7744 wheel hub.
Fits 25" thru 33" Snapper rear engine riders.
|
|
|
|
|
|
|
|
|
|
R324 - 1/2" X 1-1/8" Bearing
|
List Price: $1.38
Our Price: $1.08
You save $0.30!
|
|
|
1/2" ID replaces Snapper 28014, 12304. Hex Shaft Bearing on 21" self-propelled mowers.
Size: ID 1/2", OD 1-1/8"
|
|
|
|
|
|
|
|
|
|
R7779 WHEEL WASHER FOR SCAG
|
List Price: $1.31
Our Price: $1.10
You save $0.21!
|
|
|
Used in wheel bearing kit 09-7780 and
with 06-3276 wheel assembly.
21/32" ID x 1-1/8" OD
|
|
|
|
|
|
|
|
|
|
R7115 - 2-1/2" WHEEL BOLT
|
List Price: $1.32
Our Price: $1.10
You save $0.22!
|
|
|
|
|
|
|
|
|
|
|
|
|
R7116 - 2-3/4" WHEEL BOLT
|
List Price: $1.32
Our Price: $1.10
You save $0.22!
|
|
|
|
|
|
|
|
|
|
|
|
|
R7117 - 3" WHEEL BOLT
|
List Price: $1.32
Our Price: $1.10
You save $0.22!
|
|
|
|
|
|
|
|
|
|
|
|
|
R7118 - 3-1/4" WHEEL BOLT
|
List Price: $1.32
Our Price: $1.10
You save $0.22!
|
|
|
R7118 WHEEL BOLT
|
|
|
|
|
|
|
|
|
|
R7885 HUB BOLT FOR SNAPPER
|
|
Our Price: $1.10
|
|
|
REPL SNAPPER 11035 (SHORT)
For left hand side, used with 08-7745 wheel hub.
Fits 25" thru 33" Snapper rear engine riders.
|
|
|
|
|
|
|
|
|
|
R8640- BLADE BOLT M10 X 1.25 REPLACES HONDA 90101-960-710
|
|
Our Price: $1.10
|
|
|
Blade bolt replaces Honda 90105-960-710, code 1663665. Fits 21" mower models HR214, HRA214, HR215, HRA215, HR216, HRA216, HRC215, HRC216, HRM215, HRB215 & HRS21. Hex flange bolt.
|
|
|
|
|
|
|
|
|
|
R11039 HEX LOCK NUT FOR EXMARK
|
List Price: $1.58
Our Price: $1.19
You save $0.39!
|
|
|
R11039 HEX LOCK NUT FOR EXMARK
REPL EXMARK 3296-51
Size 3/4"-10
Used with R10194 yoke
|
|
|
|
|
|
|
|
|
|
R9296- 1/2-20 JACKSHAFT LOCKNUT REPLACES MURRAY 15X72
|
List Price: $1.50
Our Price: $1.20
You save $0.30!
|
|
|
REPLACES MURRAY 15X72. LOCKNUT FOR OUR R2925 SPINDLE ASSEMBLY & R8320 SPINDLE REPAIR KIT.
Size 1/2" - 20
|
|
|
|
|
|
|
|
|
|
R9746- Flange Bushing Replaces Murray 90035
|
List Price: $2.50
Our Price: $1.25
You save $1.25!
|
|
|
REPLACES MURRAY 90035, PRIME LINE 7-04196, SILVER STREAK 45-042, STENS 225-163. FITS FRONT AXLE SPINDLE BEARING ON MURRAY PRE-1991 TRACTORS.
ID 3/4" (19.05 mm)
OD 7/8" (22.23 mm)
Height 11/16" (17.46 mm)
Height 1-1/8" (28.58 mm)
|
|
|
|
|
|
|
|
|
|
R326 - 5/8" X 1-3/8" Bearing
|
List Price: $1.82
Our Price: $1.25
You save $0.57!
|
|
|
5/8" ID (15.88 mm) x 1-3/8" OD (34.93 mm) Fits 8 x 2.75, 10 x 2.75.
Size: ID 5/8", OD 1-3/8"
|
|
|
|
|
|
|
|
|
|
R8995 - Retainer Bushing For Scag
|
List Price: $2.31
Our Price: $1.25
You save $1.06!
|
|
|
Retainer bushing only for Scag. Used on our Scag wheel assembly 8-3276. OD 1-3/8" (34.93 mm), ID 5/8" (15.86 mm).
Size: ID 5/8", OD 1-3/8"
|
|
|
|
|
|
|
|
|
|
R310 ADJUSTABLE WHEEL BOLT
|
List Price: $1.42
Our Price: $1.25
You save $0.17!
|
|
|
R310 ADJUSTABLE WHEEL BOLT
Consists of bolt, spacer and nut.
Fits all 1/2" hubs
Adjustable length from 1-1/4" to 2" plated.
|
|
|
|
|
|
|
|
|
|
R8999- RETAINER BUSHING 3/4 X 1-1/2 FOR EXMARK
|
List Price: $2.31
Our Price: $1.25
You save $1.06!
|
|
|
Replaces EXMARK 3322154 & SUNBELT B1SB8999.
Used on Exmark 3322154 wheel assembly & our R8197 wheel assembly for Gravely. OD 1-1/2" (38.10 mm), ID 3/4" (19.05 mm).
|
|
|
|
|
|
|
|
|
|
R7279- DRAGLINK BUSHING 3/8 X 17/32 FOR AYP
|
List Price: $2.29
Our Price: $1.25
You save $1.04!
|
|
|
Replaces; AYP/ROPER/SEARS 126847X, OREGON 45-128, PRIME LINE 7-04195 & SUNBELT B1RS10.
Draglink bushing for front engine riders.
ID 3/8", OD 17/32", Height 15/32", Flange OD 11/16"
|
|
|
|
|
|
|
|
|
|
R9502 - Engine Mount Bushing for MTD 922-0513
|
List Price: $1.63
Our Price: $1.25
You save $0.38!
|
|
|
Replaces OEM: MTD 922-0513
Fits 600 series riders.
Nylon Material
|
|
|
|
|
|
|
|
|
|
R6885 CASTER YOKE SPACER FOR BOBCAT
|
List Price: $1.64
Our Price: $1.29
You save $0.35!
|
|
|
R6885 CASTER YOKE SPACER FOR BOBCAT
REPL BOBCAT 64163-07
1" ID x 1-3/4" OD x 1/4" Thickness
|
|
|
|
|
|
|
|
|
|
R8418 YOKE WASHER FOR TORO
|
List Price: $1.65
Our Price: $1.29
You save $0.36!
|
|
|
REPL TORO 3-6781
Fits TORO midsize mowers 36", 37", 44", 52" & 62"
cut decks. Models 30136, 30137, 30144, 30152 & 30162.
Used with 10-8477 yoke.
1-3/16" ID x 1-3/4" OD x 1/8" Thickness
|
|
|
|
|
|
|
|
|
|
R2964 WHEEL BOLT FOR LAWNBOY
|
List Price: $2.52
Our Price: $1.35
You save $1.17!
|
|
|
R2964 WHEEL BOLT FOR LAWNBOY
REPL LAWNBOY 603441
1-9/16" x 3/8"
|
|
|
|
|
|
|
|
|
|
R9892 - Flanged bearing. 1-1/8" OD. 3/8" ID
|
|
Our Price: $1.38
|
|
|
Universal Flanged Bearing
Size: ID 3/8"; OD 1-1/8"
|
|
|
|
|
|
|
|
|
|
R2225- 5/16" QUICK PIN FOR BOBCAT
|
List Price: $1.56
Our Price: $1.39
You save $0.17!
|
|
|
Replaces; BOBCAT/RANSOM 64173-01, OREGON 02-445, SNAPPER/KEES 7-6967, SNAPPER/KEES 7076967 & SUNBELT B1WH2.
5/16" Quick Pin
|
|
|
|
|
|
|
|
|
|
R9546- Idler Pulley Reducer Bushing Replaces Murray 390369
|
List Price: $1.75
Our Price: $1.45
You save $0.30!
|
|
|
Idler Pulley Reducer Bushing Replaces Murray 390369
|
|
|
|
|
|
|
|
|
|
R6973 CLUTCH/BRAKE SPG FOR SNAPPER 13885
|
List Price: $1.96
Our Price: $1.45
You save $0.51!
|
|
|
Replaces
SNAPPER/KEES 1-3885
SUNBELT B1SN44
DIAMETER: 17/32"
LENGTH OF COIL: 3-9/16"
OVERALL LENGTH: 5-1/8"
THICKNESS: 1/16"
|
|
|
|
|
|
|
|
|
|
R3223 WHEEL DRIVE SPRING FOR SNAPPER 13694
|
List Price: $1.63
Our Price: $1.45
You save $0.18!
|
|
|
Replaces:
OREGON 05-060
PRIME LINE 7-05363
SNAPPER/KEES 1-7326
SNAPPER/KEES 2-9025
STENS 285-635
SUNBELT B1SB3223
DIAMETER: 5/8"
LENGTH OF COIL: 1-1/2"
OVERALL LENGTH: 3-1/4"
THICKNESS: 1/16"
|
|
|
|
|
|
|
|
|
|
R325- FLANGED BALL BEARING 1/2X1-3/8
|
List Price: $1.60
Our Price: $1.45
You save $0.15!
|
|
|
Replaces; OREGON 45-012, PRIME LINE 7-07476, STENS 215-020, STENS 230-241 & SUNBELT B1SB325.
1/2" ID (12.70 mm) x 1-3/8" OD (34.93 mm) Fits many universal wheels
|
|
|
|
|
|
|
|
|
|
R10064- FRONT WHEEL SPACER FOR EXMARK 1-633581/ SCAG 43584
|
|
Our Price: $1.47
|
|
|
Replaces EXMARK 1-633581, SCAG 43584, STENS 230-225 & SUNBELT B1EX25.
Fits Lazer Z units. Fits our 8-9803, 8-9804, 8-9809 wheels. Spacer for front wheel, bearing & seal.
ID 3/4"; OD 1-1/8"; Width 5/8"
|
|
|
|
|
|
|
|
|
|
R9513 LEFT HAND SPACER FOR SNAPPER
|
List Price: $1.64
Our Price: $1.49
You save $0.15!
|
|
|
R9513 LEFT HAND SPACER FOR SNAPPER
REPL SNAPPER 32114
Fits Snapper extra tough series for 28", 30",
33" &41" rear engine riders.
3/4" ID x 1" OD x 7/8" Length
|
|
|
|
|
|
|
|
|
|
R8830 SHOULDER BOLT FOR AYP
|
List Price: $2.29
Our Price: $1.49
You save $0.80!
|
|
|
REPL AYP 131340
Fits 42" AYP vented decks.
|
|
|
|
|
|
|
|
|
|
R9329- 9/16"-18 JACKSHAFT NUT REPLACES MURRAY 15X100
|
List Price: $1.95
Our Price: $1.50
You save $0.45!
|
|
|
REPLACES MURRAY 15X100, STENS 285-183. FITS MURRAY SPLINED SHAFTS. HEX HEAD. Size 9/16" - 18
|
|
|
|
|
|
|
|
|
|
R327 - 3/4" X 1-3/8" Bearing
|
List Price: $3.26
Our Price: $1.50
You save $1.76!
|
|
|
3/4" ID (19.05 mm) x 1-3/8" OD (34.93 mm) Replaces Snapper No. 11807,Toro No. 110513, 251-210.
Replaces OEM #: 11807, 110513, 251-210
Size: ID 3/4", OD 1-3/8"
|
|
|
|
|
|
|
|
|
|
R9326 - Flanged Bearing Replaces MTD 941-0324
|
List Price: $3.61
Our Price: $1.50
You save $2.11!
|
|
|
Bearing replaces MTD 741-0324. Flanged bearing fits self propelled mowers. (nylons)
Replaces OEM #: MTD941-0324
Size: ID 1/2", OD 11/16", Height 19/32"
|
|
|
|
|
|
|
|
|
|
R8184- FLANGE PLATE FOR BOBCAT
|
|
Our Price: $1.50
|
|
|
Replaces; BOBCAT/RANSOM 65263A, PRIME LINE 7-07453 & STENS 230-064.
Used to hold transmission shaft bearings on 36", 54" and 61" decks.
|
|
|
|
|
|
|
|
|
|
R2910- CLEVIS PIN FOR BOBCAT TRACTION
|
List Price: $4.61
Our Price: $1.50
You save $3.11!
|
|
|
Replaces; BOBCAT/RANSOM 64140-2, BOBCAT/RANSOM 64188-21, STENS 285-916 & SUNBELT B1CO199.
Clevis Pin for Traction Control Handle. Comes complete with Cotter Pin.
|
|
|
|
|
|
|
|
|
|
R2226- 3/16" QUICK PIN FOR BOBCAT
|
List Price: $3.05
Our Price: $1.50
You save $1.55!
|
|
|
Replaces; BOBCAT/RANSOM 64173-02, BOBCAT/RANSOM 64173-05, EXMARK 809006, OREGON 02-443, PRIME LINE 7-07439,
PRIME LINE 7-07440, STENS 285-387, STENS 285-631 & SUNBELT B1WH1.
3/16" Quick Pin
|
|
|
|
|
|
|
|
|
|
R7212 - 4" WHEEL BOLT
|
|
Our Price: $1.54
|
|
|
R7212 WHEEL BOLT
|
|
|
|
|
|
|
|
|
|
R6974 BELT CLUTCH SPRING FOR SCAG 48051
|
List Price: $1.77
Our Price: $1.55
You save $0.22!
|
|
|
Replaces:
ENCORE 363117
OREGON 43-026
PRIME LINE 7-05366
SCAG 48051
STENS 285-696
SUNBELT B1SB6974
COIL LENGTH: 2-3/16"
DIAMETER: 3/4"
OVERALL LENGTH: 3-1/2"
THICKNESS: 3/32"
|
|
|
|
|
|
|
|
|
|
R3301 BRAKE SPRING FOR AMF 35410
|
List Price: $1.64
Our Price: $1.55
You save $0.09!
|
|
|
Replaces:
AMF/DYNAMARK/NOMA 782223
OREGON 48-003
PRIME LINE 7-05354
STENS 285-122
SUNBELT B1SB3301
DIAMETER: 5/8"
LENGTH OF COIL: 2-7/8"
OVERALL LENGTH: 4-9/16"
THICKNESS: 5/64"
|
|
|
|
|
|
|
|
|
|
R254 SPRING FOR MTD 732-0157
|
List Price: $7.05
Our Price: $1.55
You save $5.50!
|
|
|
Replaces:
MTD 732-0157
MTD 932-0157
PRIME LINE 7-05359
STENS 285-056
SUNBELT B1SB254
DIAMETER: 3/8"
LENGTH OF COIL: 2"
OVERALL LENGTH: 3-3/8"
THICKNESS: 1/16"
|
|
|
|
|
|
|
|
|
|
R9678 Wheel plastic 9" FLYMO (export only)
|
|
Our Price: $1.65
|
|
|
9" plastic wheel replaces Flymo 5127517. 9" wheel 1-1/2" (38mm) hub. .475" (12.1mm) center hole.
Black hub cover. Used with our inside hub cover 07-9672 (EXPORT ONLY)
|
|
|
|
|
|
|
|
|
|
R11142 SHOULDER BOLT FOR AYP
|
List Price: $2.09
Our Price: $1.65
You save $0.44!
|
|
|
R11142 SHOULDER BOLT FOR AYP
REPL AYP 184219, 137644 & 193406
REPL CUB CADET 938-3055
REPL JOHN DEERE 193406
Fits deck wheels on riders 2003 and up.
3-5/8" overall length
|
|
|
|
|
|
|
|
|
|
R8522- YOKE BUSHING 1 X 1-3/8 FOR GRAVELY
|
List Price: $3.17
Our Price: $1.65
You save $1.52!
|
|
|
Replaces; GRAVELY 18355, STENS 225-726 & SUNBELT B1SB8522.
Yoke bushing on models Promaster, Pro 40, Pro 50, Pro 200, Pro 100, nylon.
ID 1", OD 1-3/8", Height 3/4", Flange OD 1-3/4"
|
|
|
|
|
|
|
|
|
|
R7249 BLADE SPACER
|
List Price: $1.98
Our Price: $1.69
You save $0.29!
|
|
|
R7249 BLADE SPACER
1/2" BLADE SPACER -1/2"ID x 1"OD
USED ON-
SCAG, BOBCAT, BUNTON, SNAPPER, and EXMARK
|
|
|
|
|
|
|
|
|
|
R9295 EXTENSION SPRING FOR MTD REPL MTD 732-0815
|
List Price: $2.92
Our Price: $1.70
You save $1.22!
|
|
|
Replaces
MTD 732-0815
COIL DIAMETER: 7/16"
COIL LENGTH: 2-11/16"
OVERALL LENGTH: 4"
|
|
|
|
|
|
|
|
|
|
R2238 CASTER YOKE SPACER
|
List Price: $1.95
Our Price: $1.75
You save $0.20!
|
|
|
R2238 CASTER YOKE SPACER
CASTER YOKE SPACER - 3/4"ID x 1-1/4" OD x 1/4" Thickness
REPL BOBCAT 64163-14, 64163-71
REPL BUNTON PL0417
|
|
|
|
|
|
|
|
|
|
R382- BRONZE BUSHING 1/2 X 3/4 FOR MTD
|
List Price: $2.75
Our Price: $1.75
You save $1.00!
|
|
|
Replaces; MTD 748-0108, MTD 948-0108, OREGON 45-085, STENS 225-334 & SUNBELT B1SB382.
ID 1/2", OD 3/4", Height 19/32", Flange OD 1"
|
|
|
|
|
|
|
|
|
|
R8654 - Hitch Bushing For Velke Sulky
|
List Price: $6.60
Our Price: $1.78
You save $4.82!
|
|
|
Fits Velke 9 x 350 x 4 caster wheel on all one wheel mowers
FLANGE OD: 15/16" - (23.81mm)
HEIGHT: 1"
ID: 1/2"
OD: 3/4"
|
|
|
|
|
|
|
|
|
|
R6886 CASTER YOKE SPACER FOR BOBCAT
|
List Price: $2.60
Our Price: $1.85
You save $0.75!
|
|
|
R6886 CASTER YOKE SPACER FOR BOBCAT
REPL BOBCAT 64163-22
1" ID x 1-11/16" OD x 1/2" Thickness
Used on caster yoke 10-6581 and 10-6582
|
|
|
|
|
|
|
|
|
|
R7720- NYLON WHEEL BUSHING 5/8X 13/16 FOR MTD
|
List Price: $3.66
Our Price: $1.85
You save $1.81!
|
|
|
Replaces; MTD 741-0313, MTD 741-0487, MTD 741-0487, MTD 941-0313, MTD 941-0487, MTD 941-0487A, PRIME LINE 7-04112,
STENS 225-169, STENS 225-750 & SUNBELT B1MT18.
ID 5/8", OD 13/16", Height 1"
Nylon wheel bushing fits MTD rider models 530-568 and 600-658.
|
|
|
|
|
|
|
|
|
|
R8306- SPINDLE BEARING 3/4 X 1 AMF/ DYNAMARK/ NOMA
|
List Price: $1.98
Our Price: $1.85
You save $0.13!
|
|
|
Replaces; AMF/DYNAMARK/NOMA 52407, PRIME LINE 7-08415, STENS 225-536 & SUNBELT B1AM45.
Used on 39" cut, 12 hp, front engine rider models 3912-081 & 082.
ID 3/4", OD 1", Height 3/4", Flange OD 1-3/8"
|
|
|
|
|
|
|
|
|
|
R9531- FIBRE SPACER 2-1/4" X 5/8" REPLACES DIXIE CHOPPER W101
|
|
Our Price: $1.86
|
|
|
R9531- FIBRE SPACER 2-1/4" X 5/8" REPLACES DIXIE CHOPPER W101
|
|
|
|
|
|
|
|
|
|
R1191 BLADE SPACER
|
List Price: $2.96
Our Price: $1.89
You save $1.07!
|
|
|
R1191 BLADE SPACER
BLADE SPACER- 5/8"ID x 1"OD x 1/4" Thickness
REPL RANSOMES /BOBCAT 64163-12
REPL BUNTON PL0617
REPL EXMARK 1-303164
REPL SCAG 43278, 43038
REPL SNAPPER/KEES 76436
|
|
|
|
|
|
|
|
|
|
R11474 SPACER WASHER FOR AYP
|
List Price: $2.29
Our Price: $1.89
You save $0.40!
|
|
|
R11474 SPACER WASHER FOR AYP
REPL AYP 187690
Used with 10-8479, 10-8549, 10-9519, 10-9520, 10-9574 & 10-9575
mandrel assemblies and shafts.
43/64" ID x 1-1/8" OD x 5/32" Thickness
|
|
|
|
|
|
|
|
|
|
R2934 Murray 165X58 Spring
|
List Price: $3.25
Our Price: $1.90
You save $1.35!
|
|
|
REPLACES MURRAY 165 X 58 & 20682, PRIME LINE 7-05352, SILVER STREAK 48-001, STENS 285-015, SUNBELT B1SB2934.
COIL DIAMETER 5/8", LENGTH OVERALL 5", LENGTH OF COIL 3-1/2", THICKNESS 5/64".
|
|
|
|
|
|
|
|
|
|
R3216- BRONZE BUSHING 1/2 X 3/4
|
List Price: $2.25
Our Price: $1.90
You save $0.35!
|
|
|
Replaces; K & S TRIM ALL 3999, K & S TRIM ALL T16276, OREGON 45-019, STENS 225-276 & SUNBELT B1SB3216.
Replaces Air Cap / K&S T16276, 3999. Bronze bushing. Velke Sulky Wheel Bearing.
ID 1/2", OD 3/4", Height 3/4", Flange OD 15/16"
|
|
|
|
|
|
|
|
|
|
R6671- BELT GUIDE FOR BOBCAT
|
List Price: $5.86
Our Price: $1.90
You save $3.96!
|
|
|
Replaces; BOBCAT/RANSOM 32345-01, PRIME LINE 7-04307, PRIME LINE 7-04309, STENS 285-175 & SUNBELT B1SB6671.
Used on all variable speed new models. Holds belt on engine pulley. (2 per unit)
|
|
|
|
|
|
|
|
|
|
R6672- BELT GUIDE FOR BOBCAT
|
List Price: $4.24
Our Price: $1.90
You save $2.34!
|
|
|
Replaces; BOBCAT/RANSOM 32345-02, STENS 285-555 & SUNBELT B1SB6672.
Used on older model single belt variable speed mowers. Uses 2 on engine pulley and 4 on wheel drive pulley. (6 per unit)
|
|
|
|
|
|
|
|
|
|
R8411 - 1/2" x 6" WHEEL BOLT FOR EXMARK
|
List Price: $2.60
Our Price: $1.95
You save $0.65!
|
|
|
R8411 WHEEL BOLT FOR EXMARK
REPL EXMARK 1-800334
Fits EXMARK midsized mowers 36", 48", 52" & 60" decks.
For models Turf Ranger, Turf Tractor, Viking & Metro models 80000
series and higher. Used with our R8447 wheel bolt nut.
1/2" x 6"
|
|
|
|
|
|
|
|
|
|
R3202- FLANGE BEARING 5/8 X 7/8 FOR MTD
|
List Price: $3.79
Our Price: $1.95
You save $1.84!
|
|
|
Replaces; MTD 748-0227, MTD 748-0227A, MTD 948-0227, MTD 948-0227A, OREGON 45-088, PRIME LINE 7-04101, STENS 225-128 &
SUNBELT B1SB3202.
ID 5/8", OD 7/8", Height 5/8", Flange OD 1-1/8" bronze
|
|
|
|
|
|
|
|
|
|
R12361- DECK MOUNT BUSHING FOR GRASSHOPPER 282575
|
|
Our Price: $1.95
|
|
|
Replaces GRASSHOPPER 282575.
|
|
|
|
|
|
|
|
|
|
R8783 Ariens 55213/55216 Snowblower Flange Bushing also fits Gravely, Jacobsen, John Deere & Noma
|
List Price: $2.92
Our Price: $1.99
You save $0.93!
|
|
|
Replaces (OEM): ARIENS 05521600
GRAVELY 05521600
JACOBSEN 53836
JOHN DEERE M127093
NOMA 53836
Fits Models: ARIENS 36" and 40" snowthrowers, newer snowblower models ST-524 & ST-724, Sierra, High Sierraseries and YT tractors
GRAVELY 815006-000101, 834034-000101, 836011-000101,834035-000101, 987103 (GLT584H) and 987107 (GLT584H)
Specs: ID:3/4"
OD: 1 3/16"
Height: 21/32
OIL IMPREGNATED, IRON. HEX-SHAPED OD
|
|
|
|
|
|
|
|
|
|
R8190 - CASTER YOKE SPACER REPLACES SCAG 43037-01 AND EXMARK 303314
|
List Price: $2.15
Our Price: $1.99
You save $0.16!
|
|
|
CASTER YOKE SPACER REPLACES SCAG 43037-01 AND EXMARK 303314.
USED WITH OUR 10-8189 SUPPORT ARM.
HEIGHT: 1/2"
ID: 7/8"
OD: 1-1/2"
|
|
|
|
|
|
|
|
|
|
R10316 WHEEL BOLT CARDED
|
List Price: $2.79
Our Price: $1.99
You save $0.80!
|
|
|
R10316 WHEEL BOLT CARDED
1-5/8"
2 per card
|
|
|
|
