Fits Poulan Pro Models 230, 260, 2050, 2075, 2150, 2175, 2250, 2550
Fits Sears Craftsman Models 351062, 351142, 351161, 351181, 352161, 352180
Pitch: 3/8" LP
No. of Teeth: 6
Herr Mfgr. No.: PO532-R6N

Fits Allis Chalmers Models: 75, 75A, 95
Fits Dayton (W.W. Grainger) Models: 2Z573, 4Z970
Fits Husqvarna Models: Husky Jr. 121
Fits Poulan Models: 25, 25A, 25DA, Countervibe, S-25
Fits Wright (Poulan) Models: 121, 122A
Fits Sears Craftsman Models: 35095, 35096, 35211, 35215, 35119, 35231, 35232, 35235, 35238, 35255, 35256, Explorer I, II.
Drum ID: 2.7"
Drum Depth: .470"
Bushing ID: .430" or 11mm.  Bushing Installed.
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: B225-M6

Replaces Poulan 952-048124
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325
Fits Poulan 210, 221, 230, 260, 2050, 2055, 2075, 2150, 2155, 2175, 2250, 2450, 2550, Patriot 1900, Woodshark.
Fits Sears 351062, 351142, 351161, 351181, 352161, 352180.
Fits Snapper 1634, 1838.
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 530048083
SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits Olympyk 931
Fits Poulan 285, 305, 335, 336, 2700, 2800, 3000, 3300, 3350, 3700
Fits Sears 251200
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 952-048078
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 35184
Fits Dayton 4Z022, 4Z023, 4Z109
Fits Poulan/Poulan Pro 180, 205, 225, 235, 1800, 2000, 2100, 2300, 2400, Micro 25
Fits Sears 35093, 35094, 35202, 35203, 35205,
Fits Skil 1620, 1622, 1624, 1634
Fits Western Auto 012, 014, 110, 112, 214, 1800, 2000, 4010, S25DA
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 952-048102
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 28031
Fits fits Allis Chalmers 75
Fits Dayton 2Z970, 4Z573
Fits Poulan/Poulan Pro 25 Series (except Micro 25), S25
Fits Sears 35235, 35238, 35255, 35256
fits Skil 1635, 1636
Fits Western Auto Wizard Models 316, AV16
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Echo 175005-14330
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 37507 (bearing does not come with sprocket but is available separately)
Fits Echo CS-451, CS-452, CS-500, CS-510, CS-550, CS-610
Fits John Deere 50V, 55EV, 55V
Fits Redmax G-561, G-621
Fits Sears 35826, 35829
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Echo 175005-14330
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET RIM: 18720
SPROCKET WASHERS: 27116 (washers do not come with sprocket but are available separately)
SPLINE: SM 7 (Small 7 Spline)
Fits Echo CS-451, CS-452, CS-500, CS-510, CS-550, CS-610
Fits John Deere: 50V, 55EV, 55V
Fits Redmax G-561, G-621
Fits Sears 35826, 35829
The Power Mate Rim Sprocket System is the most effective way to drive saw chain on most chainsaws.
The Power Mate Rim Sprocket System includes a clutch cup with spline and a replaceable rim sprocket.
The rim floats freely on the spline, maximizing the saw chain-bar groove alignment.
The rim is designed to be replaced, maximizing operational life and reducing overall operating costs.
Note: All rim sprockets have two sets of teeth.

SPROCKET PITCH: 1/4"
TEETH: 9
Fits Echo CS-300, CS-301, CS-305, CS-340, CS-341, CS-345, CS-346, CS-3000, CS-3350, CS-3400, CS-3450
The Power Mate Rim Sprocket System is the most effective way to drive saw chain on most chainsaws.
The Power Mate Rim Sprocket System includes a clutch cup with spline and a replaceable rim sprocket.
The rim floats freely on the spline, maximizing the saw chain-bar groove alignment.
The rim is designed to be replaced, maximizing operational life and reducing overall operating costs.
Note: All rim sprockets have two sets of teeth.