You are here: Home > Tiller Parts > Troy Bilt Tiller Parts
We found 114 results matching your criteria.
Sort By:
Page of 2
1901118A  - Genuine MTD Standard Garden Tiller Tine Kit 1901118A - Genuine MTD Standard Garden Tiller Tine Kit

* This part replaces: 1901118, GW-1245K, GW-1348
Fits Troy Bilt Big Red, Horse, Econo Horse, and Pony Tillers
Fits Tillers with BOTH Cast Iron, and Welded Steel Tine Holders
Included in Standard Tine Set:
(8) 742-04119 Left Curved Tines
(8) 742-04118 Right Curved Tines
(16) 710-3005 3/8"-16 x 1-1/4" Hex Head Bolts (Grade 5)
(16) 3/8"-16 Hex Locknuts

Our Price: $172.34
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD 742-04119-0637 12" Standard Left Curved Bolo Tine 742-04119-0637 - Genuine MTD 12" Standard Left Curved Bolo Tine

Replaces 1270-1, 1270-1A, GW-1270-1, GW-1270-1A, 742-04119
Fits Troy Bilt Big Red, Horse, Econo Horse, and Pony Tillers
Fits Tillers with BOTH Cast Iron, and Welded Steel Tine Holders

Our Price: $17.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD 742-04118-0637 12" Standard Right Curved Bolo Tine 742-04118-0637 - Genuine MTD 12" Standard Right Curved Bolo Tine

Replaces 1270-2, 1270-2A, GW-1270-2, GW-1270-2A, 742-04118
Fits Troy Bilt Big Red, Horse, Econo Horse, and Pony Tillers
Fits Tillers with BOTH Cast Iron, and Welded Steel Tine Holders

Our Price: $15.99
This item must be picked up in our store. Please call to make sure in stock.
946-04058 Genuine MTD Reverse Clutch Cable 946-04058 Genuine MTD Reverse Clutch Cable

* This part replaces: 1916719, 746-04058, GW-1916719
54-in Length
52-in Casing Length
Reverse Drive Engagement Cable
Used on Garden Tillers

Our Price: $33.50
This item must be picked up in our store. Please call to make sure in stock.
GENUINE MTD GW-10802 CUSTOM GARDEN TILLER TINE KIT GW-10802 - GENUINE MTD CUSTOM GARDEN TILLER TINE KIT

Special hard-faced, high-chrome carbon alloy tines that are thicker and last up to 2 1/2 times longer than standard Bolo Tines.
These tines better resist the abrasive action of rocky, gritty or sandy soil as compared to standard Bolo Tines.
Included in Custom Tines Set:
(8) GW-2475-1  - Left Curved Custom Tines
(8) GW-2475-2  - Right Curved Custom Tines
(16) 710-0514 - 3/8"-16 x 1" Hex Head Bolts (Grade 5)
(16) 712-0798 - 3/8"-16 Hex Nuts
(16) 736-0169 - Lock Washers
Works with both cast iron and steel holders.

Our Price: $299.00
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-2475-1001 Left Curved Custom Tine Genuine MTD GW-2475-1001 Left Curved Custom Tine

Replaces MTD Troy Bilt GW-2475-1
to purchase the whole Tiller Tine Set, Choose GW-10802
Special hard-faced, high-chrome carbon alloy tine that is thicker and lasts up to 2-1/2 times longer than a standard Bolo Tine.
This tine better resist the abrasive action of rocky, gritty or sandy soil as compared to a standard Bolo Tine.

Our Price: $32.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-2475-2001 Right Curved Custom Tine Genuine MTD GW-2475-2001 Right Curved Custom Tine

Replaces MTD Troy Bilt GW-2475-2
to purchase the whole Tiller Tine Set, Choose GW-10802
Special hard-faced, high-chrome carbon alloy tine that is thicker and lasts up to 2-1/2 times longer than a standard Bolo Tine.
This tine better resist the abrasive action of rocky, gritty or sandy soil as compared to a standard Bolo Tine.

Our Price: $32.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-1901 Tiller Tine Kit for Bronco, Super Bronco and Pro-Line Models Genuine MTD GW-1901 Tiller Tine Kit for Bronco, Super Bronco and Pro-Line Models

Replaces MTD/Troy Bilt  Part Number 1901
Used for Bronco, Super Bronco and Pro-Line Models.
Bolo Tine Replacement Set Includes: (8) 742-04226-0637 Right Hand Tines, (8) 742-04227-0637 Left Hand Tines & required hardware
Works with both cast iron and steel holders.

Our Price: $171.72
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD 742-04227-0637 10" Left Bolo Tine for Bronco, Super Bronco and Pro-Line Models 742-04227-0637 - Genuine MTD 10" Left Bolo Tine for Bronco, Super Bronco and Pro-Line Models

Replaces MTD/Troy Bilt  Part Number 742-04117, 742-04117-0637
Used for Bronco, Super Bronco and Pro-Line Models.

Our Price: $12.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD 742-04226-0637 10" Right Bolo Tine for Bronco, Super Bronco and Pro-Line Models 742-04226-0637 - Genuine MTD 10" Right Bolo Tine for Bronco, Super Bronco and Pro-Line Models

Replaces MTD/Troy Bilt  Part Number 742-04116, 742-04116-0637
Used for Bronco, Super Bronco and Pro-Line Models.

Our Price: $12.99
This item must be picked up in our store. Please call to make sure in stock.
R8620 - Economy Tiller Tine Set for Troy Bilt 1901118. For new style tillers with steel tine holder R8620 - Economy Tiller Tine Set for Troy Bilt 1901118. For new style tillers with steel tine holder

Replaces (OEM): ARIENS (left hand) 00129300, 00129351, 00129359
ARIENS (right hand) 00129200, 00129251, 00129259
AYP/ROPER/SEARS (left hand) 4459J, 6554J
AYP/ROPER/SEARS (right hand) 4460J, 6555J
JOHN DEERE (left hand) M130045
JOHN DEERE (right hand) M130044
MTD (left hand) 1916947, 1916947001, 742-0105, 742-0105-0637
MTD (right hand) 1916946, 1916946001, 742-0106, 742-0106-0637
ROTO-HOE (left hand) 1569
ROTO-HOE (right hand) 1570
TROY BILT (left hand) 1270-1A, 742-04119-0637, GW-1270-1A
TROY BILT (right hand) 1270-2A, 742-04118-0637, GW-1270-2A

Fits Models: TROY BILT Horse and Pony models

Complete set:
8 left hand tiller tines
8 right hand tiller tines
Does Not fit cast iron tine holder; will only fit new style steel tine holders
Includes Hardware
Tine Measurements:
Bolo Tine: 12"
Center to Center: 2-5/8" or 3-1/8"
Thickness: .250"
Three Bolt Holes: 3/8"

Our Price: $115.00
This item must be picked up in our store. Please call to make sure in stock.
12703 - 10" Economy Tiller Tine Set for Troy Bilt GW-1901, 742-04116, 742-04117. Used on Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP R12703 - 10" Economy Tiller Tine Set for Troy Bilt GW-1901, 742-04116, 742-04117. Used on Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Replaces (OEM): TROY BILT GW-1901 742-04116 & 742-04117, 742-04116-0637, 742-04117-0637

Fits Models: Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Complete set:
 8 - R12860 - left hand tiller tines
 8 - R12859 - right hand tiller tines
Hardware included:
 32 cap screws,
 32 hex nuts
 32 lock washers
Tine Measurements:
 Bolo Tine:  10"
 Center to Center:  2-5/8"
 Two Bolt Holes:  3/8"

Imported

Our Price: $115.00
This item must be picked up in our store. Please call to make sure in stock.
1900864 Genuine MTD Troy-Bilt Tiller Bar Depth Regulator 1900864 Genuine MTD Troy-Bilt Tiller Bar Depth Regulator

* This part replaces: 1117A, 1902318, GW-1117, GW-1117A,
GW-1900864, GW-1902318, GW-1916186001, GW-20795
Comes with tolerance ring .5325 ID and control knob.

Our Price: $43.14
This item must be picked up in our store. Please call to make sure in stock.
1900867001 Genuine MTD Troy-Bilt Depth Regulator Bar Drag 1900867001 Genuine MTD Troy-Bilt Depth Regulator Bar Drag

* This part replaces: 1900867004, 1900867010, 1900867021,
GW-1900867001, GW-1900867010, GW-1900867021, GW-2121

Our Price: $21.99
This item must be picked up in our store. Please call to make sure in stock.
GW-1113-1099 Genuine MTD Troy-Bilt Bushing .5 x .375 x .3 GW-1113-1099 Genuine MTD Troy-Bilt Bushing .5 x .375 x .3

* This part replaces: 1113-1, GW-1113, GW-1113-1, GW-1113-2
.50" Inside Dia.
.375" Outside Dia.

Our Price: $2.99
This item must be picked up in our store. Please call to make sure in stock.
1903633 Genuine MTD Troy-Bilt Depth Regulator Drag Bar 1903633 Genuine MTD Troy-Bilt Depth Regulator Drag Bar

* This part replaces: This part replaces: GW-1903633 , GW-4763, 4763
Fits Troy-Bilt Horse Tiller serial no. 24575 & up

Our Price: $39.38
This item must be picked up in our store. Please call to make sure in stock.
941-04300 Genuine MTD Troy-Bilt Bushing, 1.25 x 1 x .005 x 1.5 941-04300 Genuine MTD Troy-Bilt Bushing, 1.25 x 1 x .005 x 1.5

* This part replaces: 1086, 741-04300, GW-1086, GW-1086099, GW-11-1044, GW-11-1086
1.25 x 1 x .005 x 1.5

Our Price: $9.99
This item must be picked up in our store. Please call to make sure in stock.
GW-1878 Genuine MTD Troy-Bilt Wheel Shaft Kit GW-1878 Genuine MTD Troy-Bilt Wheel Shaft Kit

* This part replaces: 1878, GW-1235, GW-1235A
Includes
(1) Hi-Pro Key .25X1.812
(2) Snap Ring .906 ID

Our Price: $122.40
This item must be picked up in our store. Please call to make sure in stock.
753-06841 Genuine MTD Shortblock 753-06841 Genuine MTD Shortblock

Fits the following Tillers:
21AK125G799 - Craftsman Tiller
21AK125G965 - Bolens Tiller
21AK125G983 - Remington Tiller
21AK125G900 - Yard Machines Tiller

Our Price: $57.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-1205 Cast Iron Tine Holder with Shield Genuine MTD GW-1205 Cast Iron Tine Holder with Shield

Replaces MTD - Troy Bilt 1205
Fits the following Troy Bilt Models:
HORSE I 6HP ROTO TILLER (S/N 1001-639999)
056 Horse III (S/N 640000-855638)
2215-2228 Horse III
2308 Horse III
6000-8811 Horse III
HORSE III 6HP ROTO TILLER (S/N 640000-855638)
HORSE III 7HP ROTO TILLER (S/N 640000-855638)
HORSE III 8HP ROTO TILLER (S/N 640000-855638)

Our Price: $128.00
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-2732 Hard Fiber Reversing Disc for Tillers Genuine MTD GW-2732 Hard Fiber Reversing Disc for Tillers

Replaces (OEM): TROY BILT: 2732
This is the older style fiber disk. For the later style rubber disk assembly, use GW-1919.
ID: 1-1/4"
OD: 3-7/8"
Thickness: 3/8"

Our Price: $47.23
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-11596 Hard Fiber Reversing Disc For two speed tillers Genuine MTD GW-11596 Hard Fiber Reversing Disc For two speed tillers

Replaces (OEM): TROY BILT: 2732, GW-2732, 1072A, 1072K, GW-1072-A, GW-1072-K, GW-11596
ID: 1-1/4"
OD: 3-7/8"
Thickness: 3/8"
Fits the following Troy bilt models:
HORSE, 6HP ROTO TILLER (S/N 1001-639999)
HORSE, 7HP ROTO TILLER (S/N 1001-639999)
HORSE, 8HP ROTO TILLER (S/N 1001-639999)

Our Price: $73.85
This item must be picked up in our store. Please call to make sure in stock.
R8192 - Tiller Reversing Disc Replaces Troy Bilt 756-04171 R8192 - Tiller Reversing Disc Replaces Troy Bilt 756-04171

Replaces (OEM): TROY BILT GW-2111, 2111, 88174, 756-04171
Used on Troy Bilt newer Horse Models: DP630-1260 Since 1989.
ID: 3/8"
OD: 3-3/4"

Our Price: $15.99
This item must be picked up in our store. Please call to make sure in stock.
GW-1919 - Troy Bilt Tiller Reversing Disc Kit GW-1919 - Troy Bilt Tiller Reversing Disc Kit

Replaces Troy Bilt 1919
*For Reversing Disc only, order 756-04171
**This is the later style rubber reverse disk assembly. If older style fiber disk, order GW-2732

Our Price: $61.49
This item must be picked up in our store. Please call to make sure in stock.
R10298 Tiller Tine Hardware Kit R10298 Tiller Tine Hardware Kit

Hardware included:
(32) 3/8" - 1, grade 5 cap screw.
(32) 3/8" - Lock Washer
(32) 3/8" - 16 Zinc Hex Nut

Our Price: $17.60
This item must be picked up in our store. Please call to make sure in stock.
R10821 Drive Belt Replaces Troy Bilt 1128-1 R10821 Drive Belt Replaces Troy Bilt 1128-1

Replaces (OEM): TROY BILT 1128-1
Fits Models: TROY BILT 2 speed horse models, serial numbers 1001 to 314150
Raw edge, laminated, fiberglass cord construction
LENGTH:  21-3/4"
WIDTH:  1/2"

Our Price: $11.75
This item must be picked up in our store. Please call to make sure in stock.
R10822 Drive Belt Replaces Troy Bilt 9245 R10822 Drive Belt Replaces Troy Bilt 9245

Replaces OEM #: Troy Bilt 9245
Fits Troy Bilt 4 speed Horse models
LENGTH:  22-1/4"
WIDTH:  1/2"

Our Price: $11.75
This item must be picked up in our store. Please call to make sure in stock.
GW-9245 Genuine Troybilt Tiller Drive Belt GW-9245 Genuine Troybilt Tiller Drive Belt

Forward Drive Belt, Replaces Part Number 9245, GW-56035
Single "V" for four-speed tillers

Our Price: $16.20
This item must be picked up in our store. Please call to make sure in stock.
R8501 Tine Shaft Replaces Troy Bilt 1026A R8501 Tine Shaft Replaces Troy Bilt 1026A

Replaces OEM #: Troy Bilt 1026A, GW-1026A
Fits rear tine tiller models Horse 1, 2 & 3 - 6, 7 & 8 hp, and models OPC Horse & PTO Horse
LENGTH: 7"
OD: 1-1/4"

Our Price: $49.50
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD GW-1773 Seal, Washer, Gasket Set Genuine MTD GW-1773 Seal, Washer, Gasket Set

Replaces MTD Troy Bilt: 1309, GW-1309, 1773
Kit Includes the following Troy-Bilt Parts:
(1) GW-1123 Top Transmission Cover Gasket
(2) 921-04031 Wheel Shaft Oil Seal (axle)
(2) GW-9618099 Shaft Oil Seal
(1) 921-04044 Pinion Shaft Oil Seal
(2) GW-9604 Pinion Bearing Retaining Plug O-Ring
(1) GW-9244 Gasket Sealant
(2) GW-1124-2099 Bearing Cap, front/rear Gasket
(2) GW-1129-1099 Tiller Housing Cover, 0.010" Thick
(1) GW-1129-2099 Tiller Housing Cover, 0.030" Thick (thickest available)

Our Price: $42.25
This item must be picked up in our store. Please call to make sure in stock.
R12860 - Left Hand Tiller Tine for Troy-Bilt 742-04117, 742-04117-0637 R12860 - Left Hand Tiller Tine for Troy-Bilt 742-04117, 742-04117-0637

Replaces (OEM): Troy-Bilt 742-04117, 742-04117-0637
Fits Models: Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Fits left hand
Bolo Tine: 10"
Center to Center: 2-5/8"
Two Bolt Holes: 3/8"

Our Price: $7.99
This item must be picked up in our store. Please call to make sure in stock.
R12859 - Right Hand Tiller Tine for Troy-Bilt 742-04116, 742-04116-0637 R12859 - Right Hand Tiller Tine for Troy-Bilt 742-04116, 742-04116-0637

Replaces (OEM): Troy-Bilt 742-04116, 742-04116-0637
Fits Models: Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Fits right hand
Bolo Tine:  10"
Center to Center:  2-5/8"
Two Bolt Holes:  3/8"

Our Price: $7.99
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD OEM-290-250 Tiller Attachment Genuine MTD OEM-290-250 Tiller Attachment

Genuine MTD OEM-290-250 Tiller Attachment
Fits Try-Bilt Horse, Horse ES, and Big Red tiller.
Includes hiller, furrower, bracket and hardware.

Our Price: $164.06
This item must be picked up in our store. Please call to make sure in stock.
Genuine MTD OEM-290-251 Tiller Attachment Genuine MTD OEM-290-251 Tiller Attachment

Genuine MTD OEM-290-251 Tiller Attachment
Fits Try-Bilt Junior, Pony, and Pro-Line tillers.
Includes hiller, furrower, bracket and hardware.

Our Price: $187.49
This item must be picked up in our store. Please call to make sure in stock.
R141 - 3/8" Lockwasher R141 - 3/8" Lockwasher

Included in our R8621 hardware kit for tillers
SIZE: 3/8"

Our Price: $0.30
This item must be picked up in our store. Please call to make sure in stock.
1185224 - Genuine MTD 3/4" Oil Seal 1185224 Genuine MTD 3/4" Oil Seal

3/4" Diameter Oil Seal
* This part replaces: 1820601, GW-1185224, GW-27085, GW-B1185224

Our Price: $9.99
This item must be picked up in our store. Please call to make sure in stock.
GW-9618099 - Genuine Troy-Bilt Tiller Shaft Oil Seal GW-9618099 - Genuine Troy-Bilt Tiller Shaft Oil Seal

Replaces Part Number 9602, GW-9602, 9616, 9618, GW-9616, GW-9618
Outside Diameter 2"
Inside Diameter 1.25"

Our Price: $12.99
This item must be picked up in our store. Please call to make sure in stock.
SU-5000174 Genuine MTD Oil Seal SU-5000174 Genuine MTD Oil Seal

* This part replaces: 1185296, 1728240, 1728248, GW-1185296, GW-B1185296, SU-9008000-7505

Our Price: $21.28
This item must be picked up in our store. Please call to make sure in stock.
921-04044 Genuine Troy-Bilt Pinion Shaft Oil Seal 921-04044 Genuine Troy-Bilt Pinion Shaft Oil Seal

* This part replaces: 1983632, 721-04044, GW-1983632, GW-85030, 9600, GW-9600, GW-H213556, GW-PT/85030/00
750 SHF X 1.250 BORE

Our Price: $5.44
This item must be picked up in our store. Please call to make sure in stock.
921-04030 Genuine MTD Troy Bilt Oil Seal 921-04030 Genuine MTD Troy Bilt Oil Seal

SEAL:OIL:.750 SHF X 1.783 BORE
* This part replaces: 721-04030, 9617, GW-9617

Our Price: $7.25
This item must be picked up in our store. Please call to make sure in stock.
921-04031 Genuine Troy-Bilt Tiller Wheel Shaft Oil Seal (axle) 921-04031 Genuine Troy-Bilt Tiller Wheel Shaft Oil Seal (axle)

Replaces Part Number 9621, 9609, GW-9621, GW-9601, GW-9609, GW-644, GW-602, 721-04031

Our Price: $6.99
This item must be picked up in our store. Please call to make sure in stock.
921-04035 Genuine Troy-Bilt Tiller Oil Seal 921-04035 Genuine Troy-Bilt Tiller Oil Seal

* This part replaces: 721-04035, 97073, 97073P,
GW-9623, GW-9623099, GW-97073
Outside Diameter 1.75"
Inside Diameter 1"

Our Price: $6.99
This item must be picked up in our store. Please call to make sure in stock.
718-04007 Genuine MTD Front Bearing Cap 718-04007 Genuine MTD Front Bearing Cap

* This part replaces: 1900879004, 1900879010, 2424, GW-1114, GW-2424

Our Price: $12.99
This item must be picked up in our store. Please call to make sure in stock.
1902404 Genuine TroyBilt Clutch Dogs Tiller Kit 1902404 Genuine TroyBilt Clutch Dogs Tiller Kit

* This part replaces: 1901712, GW-10353, GW-1902404,
GW-2120-1, GW-2120-2, GW-2120-3, GW-2130, GW-2132

Our Price: $83.18
This item must be picked up in our store. Please call to make sure in stock.
R8407 Axle Oil Seal Replaces MTD, Troy Bilt 921-04031 R8407 Axle Oil Seal Replaces MTD, Troy Bilt 921-04031

Replaces (OEM): MTD/Troy Bilt 9621, 9609, GW-9621,
GW-9601, GW-9609, GW-644, GW-602, 721-04031
Fits Models: Troy Bilt Horse models
ID: 1"
OD: 1-1/2"

Our Price: $2.50
This item must be picked up in our store. Please call to make sure in stock.
R8406 Tine Oil Seal Replaces MTD, Troy Bilt GW-9618099 R8406 Tine Oil Seal Replaces MTD, Troy Bilt GW-9618099

Replaces (OEM): MTD/Troy Bilt 9602, GW-9602, 9616, 9618, GW-9616, GW-9618
Fits Models: Troy Bilt Horse models
ID: 1-1/4"
OD: 2"

Our Price: $3.99
This item must be picked up in our store. Please call to make sure in stock.
710-3005 Genuine MTD Hex Bolt 3/8-16 x 1.25 710-3005 Genuine MTD Hex Bolt 3/8-16 x 1.25

* This part replaces: 01000369, 1100043, 1110043, 1509-091,
1509-117, 153015, 2050511, 2050611, 457176, 706-10123-20,
706-501277-1, 710-0342, 910-3005, BN-Z24008, GW-1100043,
GW-1110043, GW-90029, GW-90043, GW-9712, GW-B1100043,
GW-L-90040, GW-T70238, IH-180124, IH-18495-R1, YS-710-3005

Our Price: $2.50
This item must be picked up in our store. Please call to make sure in stock.
711-0679A - Genuine MTD Clevis Pin 711-0679A - Genuine MTD Clevis Pin

711-0679A
PIN- CLEVIS .375" x 1.75"
* This part replaces: 1545-029, 1545-029B, 40104, 488825, 489823, 616532, 711-0599, 711-0679, 711-0705, IH-58987-C1, YS-711-0679A

Our Price: $8.50
This item must be picked up in our store. Please call to make sure in stock.
710-3029 - Genuine MTD Hex Screw 710-3029 - Genuine MTD Hex Screw

710-3029
Genuine Parts Hex Screw, 7/16-20 x 1.25
* This part replaces: 1736485, 910-3029, DR-4001-33, GW-1736485, GW-90019, GW-98-053, GW-98053, GW-B1736485, GW-T71270
Fits Models:
Bolens: 13AC650F765, 13AM662F765, 13AM662G765, 13AM762F765
Gold Series: 13AD688G300, 13AD688G722, 13AD698G300, 13AD698G722, 13AF688G722, 13AF698G722, 13AG688H722, 13AJ688G722, 13AT618H300
Huskee: 13AJ791G731, 13AL608G731, 13AM680F731, 13AM682G731, 13AM771F731, 13AN682G731, 13AN771G731, 13AP698G731, 13AS608H731, 13AT688H731, 13CS608H731
Huskee Supreme: 13AJ795G730
MTD Pro: 13AO791G718
Private Label: 13AF698G131, 13AM660F131, 13AQ608H131, 13BS608H131, 14AR808K131
Ranch King: 13AD618G705, 13AD668G705, 13AF618G705, 13AG618G705, 13AT618G705, 13AU618H705
Troy-Bilt: 13AJ609G766, 13AJ689G766, 13AN689G766, 13AT609G766
White Outdoor: 13A2606G790, 13A2683G790, 13A6616H190, 13AJ606G790, 13AJ616G790, 13AJ616H190, 13AY616G790, 13BT616H190
Yard Machines: 13A1760F700, 13A3760F700, 13A3761G700, 13A3771G700, 13A3791G700, 13A7660G752, 13A7668H352, 13AB652F729, 13AC650F000, 13AC650F700, 13AC762F729, 13AD618G726, 13AD685G000, 13AD685G700, 13AD695G700, 13AF618G726, 13AF685G700, 13AF695G700, 13AG618G706, 13AH650F352, 13AH650F752, 13AH762F752, 13AJ690G752, 13AM660F000, 13AM660F700, 13AM660G000, 13AM660G700, 13AM660G752, 13AM762G752, 13AN660G752, 13AN662G729, 13AN682G729, 13AN771G729, 13AQ608H729, 13AT618G706, 13BM660F000
Yard-Man: 13AJ693G755, 13AN791G755, 13AT604G701, 13AT604G755, 13AT604H701, 13AT604H755, 13AT614H401, 13AT614H701, 13AT614H755, 13AU614H755, 13AX614G701, 13AZ614H401, 13AZ614H701, 13BT604G401, 13BT604H401

Our Price: $2.75
This item must be picked up in our store. Please call to make sure in stock.
941-3037 Genuine MTD Ball Bearing 941-3037 Genuine MTD Ball Bearing

* This part replaces: 741-0360, 741-3037, 941-0360, 97074, 97074P,
GW-97074, IH-56882-C91, IH-ST2256, IH-ST2258, IH-ST225B

Our Price: $22.99
This item must be picked up in our store. Please call to make sure in stock.
711-05735 Genuine MTD Clevis Pin 711-05735 Genuine MTD Clevis Pin

This part replaces: 00009678
Fits Models: Craftsman Wide Area Mower- 55AC5GMR099, Craftsman Wide Area Mower- 55AC5GMR299

Our Price: $6.99
This item must be picked up in our store. Please call to make sure in stock.
710-3130 Genuine MTD Hex Bolt 8 3/8-16 X 3.25 710-3130 Genuine MTD Hex Bolt 8 3/8-16 X 3.25

This part replaces: 01000371, 710-0644, IH-251231-R1
Fits Models:
Bolens- 21A-250H765
Craftsman- 21AB47M6099, 24AF570L799
Yard Machines- 24AF550C729, 24AF551D700, 24AF572B729

Our Price: $5.99
This item must be picked up in our store. Please call to make sure in stock.
02002426 Genuine MTD Weight Bar 02002426 Genuine MTD Weight Bar

* This part replaces: 01002152, 01003789, 01003790, 01004930, 719-04069
Fits Models:
Craftsman- 55AC5GMR099, 55AC5GMR299
MTD- 55AE200R718

Our Price: $101.95
This item must be picked up in our store. Please call to make sure in stock.
02003417 - Genuine MTD Transmission Pulley 02003417 - Genuine MTD Transmission Pulley

* This part replaces: 01008381, 01008381P, 01008808
Fits Models:
Craftsman- 17AL3AGV099

Our Price: $31.99
This item must be picked up in our store. Please call to make sure in stock.