Replaces GRASSHOPPER 282575.
HEIGHT: 1-1/4"
LENGTH: 1-5/8"
WIDE DIAMETER: 3/4"

Replaces: Grasshopper 902284
ID:  3/8"
LENGTH:  2-3/64"
OD:  5/8"

Replaces OEM#: GRASSHOPPER 265615
BALL JOINT ASSEMBLY. RIGHT HAND THREADS.
THREAD SIZE: 5/16"-24

Replaces OEM: Grasshopper 426122
Fits 52", 61", & 72" decks
HEIGHT: 3"
ID: 5/8"
WIDTH: 2"

Replaces: Grasshopper 942137
ID:  3/8"
LENGTH:  3-7/16"
OD:  5/8"

Replaces BRIGGS & STRATTON 99157
COUNTRY CLIPPER C28971
DEALERS CHOICE 241070
GRASSHOPPER 110080, 110081, 110082, 833210
HOMELITE/JACOBSEN 310427, 345050, 350759
JOHN DEERE JD30198, M63810, M88251
KAWASAKI 92045-1163, 92045-1229
KUBOTA 08141-06205
SCAG 483466
TORO/WHEEL HORSE 104-3096, 104-6325, 116-0720, 251-257, 251-339, 251-342, 251-82
ID: 25 mm
OD: 52 mm
WIDTH: 0.5906"

Replaces OEM: Grasshopper 426122
This is a two piece roller.
Inner Diameter 5/8"
Width 6-1/8"

SIZE: 9 X 350 - 4
VALVE STEM: 90 DEGREE - TURNED

Replaces OEM #: BAD BOY 022-5234-98
BUNTON-GOODALL PL7540
EXMARK 1-603299, 603299
GILSON 710138
KUBOTA K5371-42110
TORO 1-603299, 68-2730
YAZOO 2302-127, YK

BORE: 5/8"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

For Hardware, order R10007 Anti-Scalp Roller Kit for EXMARK

Replaces OEM#: Exmark 633131, John Deere M80373, Grasshopper 265545 & Noma 305530.

Replaces:
BOBCAT/RANSOM 38020
DIXIE CHOPPER 20214
EXMARK 303105
GRASSHOPPER 265537
OREGON 06-003
SUNBELT B1SB9142
SUNBELT B1SB9142  

THREADS:  5/16" - 24 FEMALE, FOR 5/16" PIN

Replaces Grasshopper 120050
FLANGE OD: 1-1/2"
HEIGHT: 1/2"
ID: 5/8"
OD: 1-3/8"

Replaces BOBCAT/RANSOM 38273, 38274
SCAG 48006-06, 48006-07, 481769, 481770
SNAPPER/KEES 22394, 22395, 7022394, 7022394YP, 7022395, 7022395YP
OPEN CAGE ROLLER BEARING IS 5/8" ID (15.86MM) X 1-3/8" OD (34.93MM), 3-1/4" LENGTH (82.55MM).
BUSHINGS ARE 5/8" ID (15.86MM) X 1-3/8" OD (34.93 MM).

Replaces Grasshopper 120048
FLANGE OD: 1-1/2"
HEIGHT: 1-1/2"
ID: 5/8"
OD: 1-3/8"

Replaces BEARING 6205-RS1, 6205DU
BRIGGS & STRATTON 99157
COUNTRY CLIPPER C28971
DEALERS CHOICE 241070
GRASSHOPPER 110081, 110082, 414686, 833210
HOMELITE/JACOBSEN 310427, 345050, 350759
JOHN DEERE JD30198, M63810, M88251
KAWASAKI 92045-1163, 92045-1229
KUBOTA 08101-06205, 08141-06205
SCAG 483466
SNAPPER/KEES 1-9572, 46555, 7-9813, 7019572, 7019572YP, 7046555, 7046555YP
TORO/WHEEL HORSE 104-3096, 104-6325, 11-3514, 251-257, 251-339, 251-342, 251-82
Fits Wheel Horse 50" & 60" cut Zero Turn 500 series mowers.
Fits Grasshopper 33210.
Also fits Snapper 19572, 79813, Zero Turn 42", 48" & 60" decks.
sealed one side.

Replaces DIXIE CHOPPER 10205, 120050
McLANE 2036
SNAPPER/KEES 1-2390, 35358, 7035358, 7035358SM
WALKER 5037, 5037-1
BEARING 44F40P
HEIGHT: 1/2"
ID: 5/8"
OD: 1-3/8"

Replaces; Grasshopper 833260
Fits rider models 612, 616, 2144, 6144, 9044, 9148, 9048, 9052, 9061, 9244, 9252, 9261, 9372, 9272.
Oil impregnated.
FLANGE OD:  1-1/2"
HEIGHT:  3-1/16"
ID:  1"
OD:  1-1/4"

Replaces BEARING RA100RR
BOBCAT/RANSOM 38348-01
BUNTON-GOODALL PL7323
CUB CADET 455102-R21, 586609-R92, 60069-C91, 60071-C91, IH-60071-C91, IH60071C92
DIXIE CHOPPER 30218
DIXON 539115279
DIXON INDUSTRIES 1701, 539102677, 539115279
EXMARK 1-513016
GRASSHOPPER 120081
HUSTLER 077123, 784223
JOHN DEERE 8597, JD8597
WALKER 5270
WOODS/HESSTON 60006, 70006
YAZOO 102677
Fits spindle assembly on 30", 42", 50" cut Zero Turn.
Also fits wheel hubs on Dixon Zero Turn with chain drive.
HEIGHT: 27/32"
ID: 1"
OD: 2"

9 x 350 x 4 Smooth / 4 Ply Tubeless Lawnmower Pneumatic Tire (Replaces Scag 48307-02,481774).

Replaces Grasshopper 122044
Fits Grasshopper 700 series
HEIGHT: 2-3/4"
ID: 1"
LENGTH: 5-1/2"

Repl. wheel bearing kit for our Bobcat, Grasshopper & Scag wheel assembly 8-3276. Comes with (2) 9-481 high speed 5/8" (15.88 mm) bearings, (2) 10-7779 21/32" (16.67 mm) x 1-1/8" (28.58 mm) washer and (1) 9-7262 5/8" OD (15.88 mm) x 4-1/16" (103.19 mm) bushing.

Replaces OEM #: Grasshopper 603927.
CASTER WHEEL. 1 PIECE RIM, SEMI-SEALED BEARING & ZERK FITTING.
FITS GRASSHOPPER 44", 52", 61" & 72" CUT. MODELS: 2144, 6144, 6152 & 6161. (PAINTED TAN).
BORE: 5/8"
HUB LENGTH: 3-1/2" CENTERED
PLY: 4
TIRE SIZE: 9 X 350 - 4
TREAD: SLICK
TYPE: TUBELESS

Rib 4 ply tubeless tire. Fits Grasshopper wheel assembly 603975. 13x650x6.
Replaces OEM #: 603975

Replaces OEM #: Grasshopper 483861.
CENTERED HUB, (1) PIECE RIM WITH BEAD LOCK, SEMI SEALED BALL BEARING & ZERK FITTING.
FITS 44", 52", 61" & 72" CUT MODELS. REAR WHEEL ON ZTR MOWERS. (PAINTED TAN)
BEARING: 5/8"
HUB LENGTH: 3-3/4" CENTERED
PLY: 4
TIRE SIZE: 13 X 500 - 6
TREAD: RIB
TYPE: TUBELESS

3-1/2" centered hub with 5/8" semi-sealed bearing and zerk fitting.
Fits 44", 52", 61" & 72" cut, models 2144, 6144, 6152 & 6161.
BORE: 5/8"
HUB LENGTH: 3-1/2"
PLY: 6
TIRE SIZE: 9 X 350 - 4
TREAD: SLICK
TYPE: SOLID
(painted tan)

Replaces OEM #: BOBCAT/RANSOM 38264, 38510
GRASSHOPPER 483800, 603925, 603971
SCAG 48006-01, 48307
CENTERED 3-PIECE RIM WITH ZERK FITTING & OPEN CAGE ROLLER BEARINGS.
(PAINTED ORANGE)
Uses our R5812 and R7780 bearing kit.
BORE: 5/8"
HUB LENGTH: 4"
PLY: 4
TIRE SIZE: 9 X 350 - 4
TREAD: SLICK
TYPE: TUBELESS

Replaces Grasshopper 482480, 482478
Fits Grasshopper Zero Turn mowers.

Turf Master / 4 Ply Tubeless Tire Replaces Grasshopper 482472