Replaces (OEM): ARIENS 62010 & MTD 710-0389
Fits Ariens ST420, ST424, ST520, ST524, ST624, ST724, ST732, ST824, ST824S, ST828, ST924, ST1028, ST1228E, ST1032, ST1032E, ST1236, ST1236E.
Also fits 20", 24", 32", 36" & 40" Snowblower Attachments.
Fits MTD 195-469-000, 195-486-000 196-486-000, 190-486-000 36" Snow Thrower Attachments, 190-623-000, 190-623-000, 190-624-000, 190-624-000, 310355, 310385, 311355, 311385, 31355-9, 31385-9 and many more MTD models
Length:

1121355 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62013, 06201300
Fits Ariens Snowblower Models: ST824S, ST824, ST828, ST924, ST924E, ST928, ST1024, ST1028, ST1032, ST1228, ST1228E, ST1232, ST1232E, ST1236, ST1236E,
36" & 48" Two Stage Sno-Thro, 40" Sno-Thro Attachment.
Length: 1" OD: 3/8"

.25-20x1.00 G5YZ

06441900 Ariens Gravely Flat Washer .531 x 1.06  x .095

121253 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62026 & MTD 1186097, 1529-025, 158907, 166759, 1712059,
1736098, 706-10611-10, 710-0260, 910-0260, 910-0260A, GW-1186097,
GW-1712059, GW-B1186097, GW-B1712059, GW-B1736098, IH-26212-R1, WM-62532
Fits Ariens ST420, ST520 20" Snowblowers, ST524, ST624, ST724, ST824, ST832, ST1032, ST8
24" & 32" Snowblowers and 24 & 32" Snowblower Attachments.
Fits MTD 22", 24", 26", 28", 45" Snowblowers and 36" Snowblower Attachments
Size: 5/16-18 x 3/4

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Comes with Lock Nut
Length: 1 9/16"
OD: 1/4"

Replaces (OEM): AMF/DYNAMARK/NOMA 53836
ARIENS 05521600, 55213, 55216
FITS NEWER ARIENS SNOWBLOWER MODELS: ST-524 & ST-724.
FLANGE OD: 1-3/16" - (30.16mm)
HEIGHT: 21/32"
ID: 3/4"
OD: 7/8"
OIL IMPREGNATED, IRON. HEX-SHAPED OD.

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"

Replaces Ariens 05500111

Fits most Ariens snowblowers

ID: 5/8"

OD: 3/4"

Height: 1/2"

* This part replaces: 7360270, 753-05555, 936-0270, GW-7360270, IH-106405-C1, YS-736-0270

* This part replaces: 712-3087P, 7123087, 912-3087, GW-7123087

* This part replaces: 1918185 , 710-0449 , 710-0882 , GW-1918185 , HG-50886

Replaces (OEM): MTD 725-1660, TC-35062, TECUMSEH 35062, ARIENS 07500108, 7532000
Fits MTD models:314-180-000, 314-180-088, TMO-3525203, 314-180-131 and 314-181-000 Push / Pull key

Replaces (OEM): ARIENS 07532000 MTD 725-1660, OEM-425-1660,  TC-35062, Tecumseh 35062
Fits Models: ARIENS ST524, ST724, ST824, ST1024, ST1028, ST1128,ST1332 and ST1336 snowthrowers
MTD 314-180-000, 314-180-088, TMO-3525203, 314-180-131, 314-181-000 snow throwers with Tecumseh engines  
 Push/pull key

Fits many Ariens and Gravely snow throwers

Replaces Ariens 36531, Manco 1414, Murray 680070
Fits Go-Karts & Wagons
Female Thread: 3/8 " -24 RH
3/8" Diameter Bore

Replaces (OEM): ARIENS 05503000, 55030, 5503000
AXLE BUSHING FOR ARIENS SNOWBLOWER MODELS: 910 & 924.
FLANGE OD: 1-1/4" - (31.75mm)
HEIGHT: 5/8"
ID: 7/8"
OD: 1"

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"
Includes 5 Snowblower Shear Pins & Lock Nuts

This part replaces: 01000364, 1186132, 710-3106, 710-3106A, GW-1186132, IH-598811-R1
Fits Models:
Columbia- 13AC26JD897
Craftsman- 12A-764M099, 12A-764M799, 12A-764T299, 12AE764H099, 12AE764Y099, 12AE76JU099, 13B226JD099, 13B226JD299, 17AL3AGV099
Murray- 13A326JC058, 13B326JC758
Troy-Bilt- 12AE763Z011
Yard Machines- 13A326JC700

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Length: 1 9/16"
OD: 1/4"
Includes 5 Shear Pins & Lock Nuts

Replaces (OEM): ARIENS 05511200
Fits Models: ARIENS 901011 20" rear tine tillers, 832003 20" and 24" snow attachments
Specs:  ID:3/4"
OD:1"
Height:3/4"

Replaces (OEM):
ARIENS 05503900, 55039
JOHN DEERE M-127082
MTD 741-0376, 941-0376
FITS OLDER ARIENS SNOWBLOWERS MODEL 1032.
OIL IMPREGNATED, BRONZE.
HEIGHT:  5/8"
ID:  3/4"
OD:  1"

Replaces (OEM): ARIENS 05503500, 55035
JOHN DEERE M124417
FITS ALL AUGER SIDE BUSHINGS MODELS 1960 TO PRESENT.
OIL IMPREGNATED, BRONZE.
HEIGHT: 5/8"
ID: 1"
OD: 1-1/8"

Replaces (OEM): ARIENS 05412300, 54123
AYP/ROPER/SEARS 129895
BEARING 6204DU, 6204RS, 62042RS
BOLENS 172-8225
HUSQVARNA 532129895, 738220419
JOHN DEERE JD7677R
MASSEY FERGUSON 1568
MTD 741-0919, 941-0919, 941-0919A, 941-0919B
SIMPLICITY/ALLIS CHA 118011, 1652231, 1652231SM, 2118011, 2118011SM
SNAPPER/KEES 1-2828, 7012828, 7012828YP
TORO/WHEEL HORSE 251-297, 251-318
Fits our R8479 Spindle Shaft w/Hardware
Fits our R7155 MTD Spindle Assembly
Fits our R7156 MTD Spindle Assembly
Fits our R8479 MTD Spindle Assembly
Fits our R9288 MTD Spindle Assembly
Fits our R8967 MTD Short Spindle Assembly
Fits our R8468 MTD Long Spindle Assembly
HEIGHT: 9/16"
ID: 25/32"
OD: 1-27/32"

Replaces OEM#: ARIENS 05412000, 54073, 54120
BOLENS 118-5828
CUB CADET 465003-R91
GRAVELY 11641
GRAVELY 35925, 5412000
JOHN DEERE 9266, JD9296
MASSEY FERGUSON 833-411-M1, 83341M1
SIMPLICITY/ALLIS CHA 108202, 2108202, 2108202SM, 536986, 7013313
SNAPPER/KEES 1-0696, 1-3313, 2108202SM, 7013313, 7013313SM
TORO/WHEEL HORSE 10-9842
YAZOO 204-060
Used on our R7154 Shaft. Bearing No. 9504-ZZ.
HEIGHT: 19/32"
ID: 3/4"
OD: 1-25/32"

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"
Includes 5 Snowblower Shear Pins & Lock Nuts

Replaces:
ARIENS: 08200204, 21397200
CRAFTSMAN: 24604
CUB CADET: CC-12-050-08, KH-12-050-01-S1
FERRIS: 5021144X1
GRAVELY: 21397200
HUSQVARNA: 531 30 73-93
HUSTLER: 747303
JOHN DEERE: AM125424, GY20577, KH1205008
KOHLER: 12 050 01, 12 050 01-S, 12 050 08, 25 050 21-S
LESCO: 032009
TORO: 12 050 01-S, 98020
WOODS: 70820
Fits Models:
CUB CADET: 1500 and 2000 series lawn tractors with Kohler engines
GRAVELY: With Kohler engines
JOHN DEERE: Lawn tractors SST15, L100 and LX173 with Kohler engines
KOHLER: CH18-CH25 and CV18-CV25
WOODS: With Kohler engines
HEIGHT:  2.7070
MICRONS:  25/30
OD:  2.9210
THREAD SIZE:  3/4-16
Available in our R12862 Oil Filter Shop Pack (12)

Replaces OEM#:ARIENS 72042, 07228600, MTD 754-0134, 954-0134, TORO / WHEEL HORSE 8-5660
Premium Belts have a protective cover made of a synthetic rubber compound having excellent resistance to heat, oil and abrasion.
Length: 33"
Width: 3/8"

Replaces OEM#:ARIENS 72066, 0720660 AYP / ROPER / SEARS 302707, TORO / WHEEL HORSE 251028  
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:34"
Width:3/8"

Replaces OEM: ARIENS 30957
AYP/ROPER/SEARS 104445X, 109869X
BLACK ROCK 119-3501
BOBCAT/RANSOM 38383
COMMERCIAL TURF PROD 18324
EXMARK 1-513152, 513152
FERRIS 21769
GREAT DANE D38085
JOHN DEERE AM108483
SIMPLICITY/ALLIS CHA 1708207, 1708207SM
SNAPPER/KEES 27225, 7027225, 923408
Single pole, snap in mounting. Normally closed.

Replaces OEM#: ARIENS 02754100, 03657100, 27541, 36571
AYP/ROPER/SEARS 104445X
BOBCAT/RANSOM 38382
BOLENS 174-8723
BUNTON-GOODALL PL4518
EXMARK 1-513051, 513051
FERRIS 21451
GARDEN WAY 1748723
HOWARD 09-058
HUSTLER 781211
JOHN DEERE AM104884
KUBOTA K2561-62251
MTD 725-3167, 925-3167
MURRAY 24273
SCAG 481637
SNAPPER/KEES 14847, 15707, 7014847, 7015707, 919098
TORO/WHEEL HORSE 65-7410
TROY BILT 1748723
YAZOO 1923-025, 539001125
Single Pole, Normally Open

Replaces ARIENS: 27541
AYP/ROPER/SEARS: 160784, 532160784
GREAT DANE: D38001, D38001
HUSQVARNA: 532160784
HUSTLER: 793315
JOHN DEERE: AM-103119
KUBOTA: K1122-62282, K112262280
MTD: 725-3167, 9253167
MURRAY: 024273, 57211
SCAG: 481638, 481638
SIMPLICITY/ALLIS CHA: 1704379, 1704379SM, 1732004SM, 7015707, 7015707YP
SNAPPER/KEES: 15707, 7015707, 7015707YP
TORO: 82-2190
WRIGHT: 524-10002
Single Post, Right Angle Snap in Mounted.
Normally Open.

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"
Includes 5 Snowblower Shear Pins & Nuts

Replaces (OEM):
ARIENS 01016500, 02459951, 02483851, 02483859
JOHN DEERE M124413, M144012
MTD 05002, 05002-0637
DOUBLE SIDED, REVERSIBLE RUNNER FITS ALL ARIENS SNOWBLOWERS FROM 60's UNTIL PRESENT.
USED ON ARIENS MODELS 924080 WITH 24' AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & BLACK IN COLOR.
Length: 5 3/4"
Width: 3 5/8"
Height: 1 1/16"
7/16" W x 1 3/4" slot
Slots are 3" apart
Bolt slots are 3" center to center
BLACK IN COLOR.

Replaces OEM#: ARIENS 03471700, 34717, 3471700
AYP/ROPER/SEARS 133957, 174873
CUB CADET 734-3058B
HUSTLER 031997
HUSQVARNA 532 13 39-57
JOHN DEERE AM-116299, M84690
MTD 734-3058, 734-3058B, 934-3058, 734-04039, 753-04856A
MURRAY 92265, 092265, 92683, 721118, 092683, 2092683, 2092683SM, 092683MA
SIMPLICITY/ALLIS CHALMERS 1700184, 1700184SM
SNAPPER/KEES 29264
TORO/WHEEL HORSE 112-0677
Fits Models: ARIENS 42" EZR 1542, EZR 1742, EZR 1842, 48" EZR 2048 and Zoom 1640
CUB CADET 38", 40" and 50" cut
EXCEL 38", 40" and 50" cut
JOHN DEERE 38", 40" and 50" cut
MTD 46" cut deck H
MURRAY 38", 40" and 50" cut, 2000 and older
SIMPLICITY 38", 40" and 50" cut
TORO 13AP60RP744 and 14AP90RP744
BORE: 1/2"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

Replaces Ariens 05435200, 54352, Bearing no. 1620-2RS
Fits snow thrower friction drive
OD: 1.375"
ID: 0.437"
Width: 0.437"

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Length: 1 9/16"
OD: 1/4"
Includes 10 Shear Pins & Lock Nuts

Replaces OEM: ARIENS 06903200, 39032, 69032
Fits snowblower models 10954, 10962, 10965, 10969, 10970.
Negative action "F" to "S".
Has bracket for side mounting
CONDUIT LENGTH: 27-1/8"
INNER WIRE LENGTH: 29"
WIRE TRAVEL: 1-3/4"

Fits Ariens, Briggs & Stratton 493988, Bolens, Cub Cadet, John Deere, Gilson, Gravely, Homelite, Jacobsen, MTD, Simplicity, Snapper and Toro.

Genuine Ariens 072065 Snowblower Belt 3/8" X 36"

Replaces Ariens 72098, 07209800, 07232100
Fits 22" single stage snow blowers
Also used on some 2-stage snow throwers as traction drive belt
Size: 3/8" x 33-1/8"

Replaces: Ariens 05409300
REF NO: 8186-2RST LYD
Fits Ariens snowblowers
ID: .880"
OD: 1-3/4"
Height: 1/2"

Replaces (OEM): ARIENS 22107.
Fits all Ariens 20" augers.
Length: 19-1/4"
Width: 1-5/8"
Thread Size: 5/16"
Five 3/8" square mounting holes.
Mounting Holes approx 4.5" apart center to center.
Steel construction, painted orange

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"
Includes 10 Snowblower Shear Pins & Lock Nuts

Replaces OEM #: AIRCAP 11604
AMF/DYNAMARK/NOMA 49907, 56922
ARIENS 01190600, 02456500, 52406900
AYP/ROPER/SEARS 135944
CUB CADET 725-3232, 925-0873
EXMARK 1-403121, 403121
FERRIS 1521842, 5021842
GREAT DANE D18090
HOMELITE/JACOBSEN GP-57823-8, JA13064-1
LAWNBOY 1-403121, 700171, 740015
LESCO 10943
MTD 925-0873
MURRAY 056419, 056419MA, 56419
SCAG 48609
SIMPLICITY/ALLIS CHA 1664804, 1664804SM
SNAPPER/KEES 17817, 28765, 7017817, 7028765, 7817
TROY BILT 1758145
Multi-application ignition switch fits single stage Simplicity & Snapper snowthrowers.
Includes key, lockwasher nut & cover.
2 TERMINALS/ 2 POSITIONS. INDAK Q431.

REPLACES OEM: AMF/DYNAMARK/NOMA: 53716
ARIENS: 03057700, 3057700
BRIGGS & STRATTON: 5409H, 5409K
HUSTLER: 030817
MTD: 725-0530, 725-0771, 725-1426, 925-0771, 925-1426, 9251426A
MURRAY: BS5409D, 21261, 24285, 424285, 5409D, 5409H, 5409K, 745000MA, 924285
SNAPPER/KEES: 1-8817, 7075671, 7075671YP, 75671
Universal starter solenoid. 3 pole, 12 volts.
Terminal post will accommodate both 5/16" & 1/4" terminal connectors.
Mounting bracket will accommodate both chassis and wall mount configurations.
LOWER STUD THREAD: 1/4"
UPPER STUD THREAD: 5/16"

Replaces OEM#:
ARIENS: 03551000, 35510
AYP/ROPER/SEARS: 109946, 146154, 532146154
BOLENS: 1753539
BRIGGS & STRATTON: 5410H, 5410K
CASE/INGERSOLL: C-33025
GILSON: 212655
GRASSHOPPER: 184251
GRAVELY: 0355100, 03551000, 355100, 45071
HUSQVARNA: 146154, 532 10 90-81, 532 10 99-46, 532145673, 532146154, 532175141, 532178861
JOHN BEAN: AM133094
JOHN DEERE: AM138497
LAWNBOY: 740207
MTD: 725-04437
MURRAY: 745001MS
SIMPLICITY/ALLIS CHA: 16771993, 16852980, 1700751
SNAPPER/KEES: 1-8604, 1755382YP, 7075622, 7075622SM, 75622
TORO: 1101162, 1101167, 47-1910, 740207
Universal Starter Solenoid. 4 Pole, 12 Volt
**Terminal Post will accomodate both 5/16"&1/4" connectors.
**Mounting Bracket will accomodate both chassis and wall mount configurations.
UPPER STUD THREAD: 5/16"
LOWER STUD THREAD: 1/4"

Replaces (OEM): ARIENS 01016400, 01016459, 10164, 1016400, 01016459
Fits ARIENS Model 924082
LENGTH: 23-3/4"
THREAD SIZE: 5/16"
WIDTH: 2"
Five 3/8" square mounting holes.
Steel Construction, Painted Orange.

Replaces (OEM):ARIENS 2459900, 02483859, 24599, 02459900
Fits ALL ARIENS 1960 UNTIL PRESENT. FITS ARIENS MODELS: 924080 & 924082 WITH 24" AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & SIMPLICITY
Length: 5 13/16"
Width: 3"
Height: 1"
Slot: 7/16" W x 1 3/14"
Bolt slot: 3" center to center

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"
Includes 10 Snowblower Shear Pins & Lock Nuts

Replaces Ariens 72023, 07202300
Fits 2-stage snow throwers (set of 2)
Size: 1/4"x27-3/4"

Replaces Ariens 07242800
Fits Pro-Master 200 series mowers
Size: 21/32"x50-1/4"

Replaces OEM#: Ariens 69087, 06908700
FITS ARIENS REAR ENGINE RIDERS WITH TECUMSEH ENGINES.  VINYL WRAPPED CONDUIT.  
CONDUIT LENGTH:  38-7/8"
INNER WIRE LENGTH:  39-7/8"
WIRE TRAVEL:  1-1/2"

REQUIRES (3) FOR 48" CUT ARIENS, CENTER BLADE FOR ARIENS 60" CUT, GT DECK.
Replaces OEM #: ARIENS 03027800, 03027859, 30278, 3027859
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 16-5/8"
THICKNESS: 0.1800"
WIDTH: 2-1/2"

Replaces OEM#: ARIENS 07204700, 72047
AYP/ROPER/SEARS 314175
JOHN DEERE PT10865
MTD 754-0131, 954-0131
MURRAY 325890, 325890MA
TORO/WHEEL HORSE 51-7432, 51-7434
TROY BILT T239661
FITS ARIENS OLDER MODEL WITH SINGLE BELT. WRAPPED BELT.
Length: 35-1/2"
Width: 3/8"

REQUIRES (3) FOR 48" CUT ARIENS; DECK #831031 GT.
Replaces OEM #: 31237, 03123759, 3123759, 03123700
C. H. DIA: 3/4"
CUT DIRECTION: RIGHT
LENGTH: 16-5/8"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Replaces OEM #: ARIENS 03551000, 35510, 3551000
AYP/ROPER/SEARS 192507
BOLENS 175-2137, 175-3539
GILSON 212655
GRASSHOPPER 184251
GRAVELY 355100, 45071
LAWNBOY 740207
SIMPLICITY/ALLIS CHA 1685290, 1700751
SNAPPER/KEES 1-8604, 7075622, 75622
TORO/WHEEL HORSE 11-0116, 47-1910
LOWER STUD THREAD:  3/16"
UPPER STUD THREAD:  1/4"

Replaces (OEM): ARIENS 72114
Fits Ariens Snowblower Models 932001, 932004, 932006, 932016, 932025, 932500, 932103, 932310, 932400, 932007, 932019, 932020, 932022, 932023, 932015, 932017, 932018
Fits Ariens Tiller Model 832004
Raw edge belt.
Width: 1/2" (12.70mm)
Length: 34-1/2" (876.30mm)

Replaces OEM #: Ariens 04265400
Fits ZT 42, Zoom 42.
C. H. DIA:  5/8"
LENGTH:  14-7/8"
THICKNESS:  0.1870"
WIDTH:  2-1/4"

Replaces 431142, 532431142, 581497903
ADJUSTER.ASM.9.22 /RF/LR.21/LF
For Husqvarna, Poulan, Roper, Craftsman, Weed Eater
**Please note: this is a RH adjuster. On some models LH. On others refer to product I

Replaces Ariens 05417700, John Deere AM122105
Bearing No. 8276-1 2RSW
Fits Ariens 924 series snowblowers
ID: 1.45"
OD: 2.19"
Height: .63"

Genuine Ariens 72094 Snowblower Belt 3/8" X 27"
Width: 3/8"
Length: 27"

Replaces (OEM): ARIENS 72086.
Raw edge belt.
Fits models 924082, 8 hp engines.
Width: 1/2" (12.70mm)
Length: 40" (1016.00mm)

Replaces OEM #: ARIENS 03551000, 35510, 3551000
AYP/ROPER/SEARS 146154
BOLENS 175-2137, 175-3539
CASE/INGERSOLL C-26525, C-33025
EXMARK 1-513075, 117-1197, 513075
GRASSHOPPER 184251
GRAVELY 355100, 45071
SIMPLICITY/ALLIS CHA 1671993, 1686981, 1686981SM, 1700751, 1686981YP
TORO/WHEEL HORSE 11-0116, 11-0162, 11-0167, 28-4210

4 POLE, 12 VOLT
LOWER STUD THREAD: 3/16"
UPPER STUD THREAD: 5/16"

Replaces OEM#: Ariens 69076, 06907600
FITS BRIGGS & STRATTON POWERED ARIENS REAR ENGINE RIDERS FROM 1971-1979.  
CONDUIT LENGTH:  50-7/8"
INNER WIRE LENGTH:  52-7/8"
WIRE TRAVEL:  1-1/2"

Genuine Ariens 72111 Snowblower Belt
Width: 1/2"
Length: 34"

Replaces OEM: ARIENS: 03192800
BOBCAT: 48045B
Cub Cadet: 723-3014, 923-3014, IH-395789-R2
HITACHI: AM39653
JOHN DEERE: AM39653
TORO: 106-5830, 108335, 79-5270
Fits Models:
ARIENS Hydro series
BOBCAT XM and 700 hydro series
Cub Cadet 1250, 1450 and 1862
GRAVELY Pro Master 400
JOHN DEERE Front mount mowers F911, F912, F915, F925, F932 and F935; Z-trak mowers F620, F680, F687,F737 and F757; lawn tractors 230, 140, 300, 312, 314, 316, 317, 318, 322, 330, 332, 400, 420 and 430.Loaders: 444J, 444H LL and 444HTC with 4045T Powertech Eng; 544H, 544H LL, 544HTC and624H with 6068 Powertech Eng; 544J and 624Jwith 6068H eng; 624G with 6068T eng; 644G with 6076 eng; 644J and 724J with 6081 Powertecheng; 644J with 6081H eng; 744H with 6125A Powertech eng; 744J, 824J and 844J with 6125 Powertech eng.
TORO 300, 400 and 500 hydro series
Thread Size: 3/4 " -16
OD: 3 1/2 "
Height: 3 3/4 "
Micron: 16

Replaces Ariens 07239200
Fits Zoom 2050 - 992028 (030000 - ) and Zoom 2250 - 992040 (031000 - ) mowers
Size: 1/2"x67-3/4"

Replaces Ariens 01213200, 12132, 1213200, 02457400, 52007000
Also replaces John Deere M124285
Fits Ariens 922003, 924028, 924029, 932000
ID: 5/16"
OD: 2-1/2"
WIDTH: 13/16"