Non-compliant with EPA and CARB regulations

OD: 7/16"

ID: 1/4"

Length: 25ft

Non-compliant with EPA and CARB regulations

OD: 7/16"

ID: 1/4"

Length: 1ft

For GX110, 120, 140, 160 (4.5X200) formed ends

Replaces Husqvarna 501285902
Fits Husqvarna chainsaws & trimmers 140, 162, 266, 36 & 61

Tygon fuel lines are compatible with up to 10% Ethanol blend fuels. Using Ethanol blends higher than 10% may speed deterioration and cause leakage.
COLOR: YELLOW
ID:  0.062" (1/16")
OD:  0.125" (1/8")
LENGTH: 1 ft.

Tygon fuel lines are compatible with up to 10% Ethanol blend fuels. Using Ethanol blends higher than 10% may speed deterioration and cause leakage.
COLOR: YELLOW
ID:  0.062" (1/16")
OD:  0.125" (1/8")
LENGTH: 50 ft.

Oregon fuel line is specially formulated gas and oil vinyl tubing - made for use with lawnmowers, chain saws and snowmobiles.
Maintains air tight seal on fittings, even in extreme temperatures.
Translucent material resists swelling or hardening
Compare to Tygon
COLOR: YELLOW
ID:  0.062" (1/16")
OD:  0.125" (1/8")
LENGTH: 1 ft.

Oregon fuel line is specially formulated gas and oil vinyl tubing - made for use with lawnmowers, chain saws and snowmobiles.
Maintains air tight seal on fittings, even in extreme temperatures.
Translucent material resists swelling or hardening
Compare to Tygon
COLOR: YELLOW
ID:  0.062" (1/16")
OD:  0.125" (1/8")
LENGTH: 25 ft.

Replaces OEM #: 70310-98
Fuel line replaces Homelite 70310-98.
Used on Homelite & McCulloch trimmers & saws. 3/64" wall.
25' roll
ID: 3/32" (.093")
OD: 13/64" (.203")

Replaces Homelite 70310-98
Used on Homelite & McCulloch trimmers & saws. 3/64" wall.
ID: 3/32" (.093")
OD: 13/64" (.203")
Priced and Sold By the Foot.

Replaces Tecumseh 29122, 29465, 30114, 30120, 30706, 30781, 34357, 430152, 430153, 430155, 430156, 430157, 430159, 430160, 430161, 430162, 430164, 430165, 430166, 430175, 430192, 430203, 430216, 430231
Length 8.62"

Replaces Tecumseh 28585, 28586, 28684, 28581, 28572, 28274, 28271, 28253, 28252, 28210, 22018, 28735, 28866, 26604, 26506, 32341, 32342,
27010, 27009, 26821, 26704, 26669, 27178, 27176, 27173, 27170, 27169, 27134, 27690, 27630, 27346, 29661, 430158, 430163, 430191, 430214,
430218, 29542, 29911, 29109, 29111, 29136, 29219, 29409, 29433, 29955, 34682
Braided
Length: 16" (41 cm)

Replaces Tecumseh 30241, 430217
Braided
Length: 32" (81 cm)

Replaces Tecumseh 32180, 32180A, 32180B
Length: 18"

NOT FOR USE ON BRIGGS & STRATTON ENGINES BUILT AFTER 050630xx IN THE STATE OF CALIFORNIA
Use the 691038 (7/16") - (11mm) fuel line clamp with this fuel line

.25 x .440

3x5x350

Replaces Tanaka 6684627

Replaces Tanaka 6696962

Replaces Briggs 808150, 398367, 690649, 691049, 697712, 699883

Formed 10-1/4" Long, Cut to Required Length

Replaces 695429

Replaces 693401

Replaces Briggs & Stratton 393244, 394045, 398750, 492309
11" Cut To Required Length

Priced and sold by the foot
Size: 1/4" ID, 1/2" OD

Size: 1/4" ID, 1/2" OD
25 foot roll

Replaces 142158

23" (1/2" OD x 1/4" ID) Cut to Fit
Superseded by 491745
Good Condition New-Old Stock

Fits Briggs & Stratton 4, 5.5 & 9 Gross HP Vanguard (Shutt-off Valve to Tank)
4 mm OD x 220 mm (8-5/8") Cut to Fit

Fits Briggs & Stratton 4, 5.5 & 9 HP Vanguard (Tank to Shut-off Valve)
8 mm OD x 470 mm (18-1/2") Cut to Fit

23" (1/2" OD x 1/4" ID) Cut to Fit

Kohler 25-111-37-S
5/16" I.D Fuel Line
Length: 5'
Fits EFI Kohler Engine Models Only

Kohler 25-111-39-S
1/4" I.D Fuel Line
Length: 25'
Fits All Kohler Engine Models except EFI

Kohler 25-111-69-S
1/4" I.D Fuel Line
Length: 11"
Fits Kohler Engine Models XT

Kohler 25-111-81-S Replaces Kohler 2511172-S, 25-111-72-S, 25 111 72-S
1/4" I.D Fuel Line
Length: 30"
Fits All Kohler Engine Models except EFI

Replaces Ryobi/Ryan 791-682039
Fits Ryobi, Lawn-Boy, Ryan and others.
Fuel filter with 6" x 1/8" fuel line.

1 Foot of 3/16" fuel line and vapor emission hose.
Meets SAE30R7 specifications.
Nitrile tube is reinforced with high strength RAYON.
Neoprene cover resists oil, grease and ozone.
Extremely durable to give years of trouble free service.
Temp, range 40"F to 200"F
ID: 3/16"
LENGTH: 1'
OD: 3/8"

25 Foot Coil 3/16" fuel line and vapor emission hose.
Meets SAE30R7 specifications.
Nitrile tube is reinforced with high strength RAYON.
Neoprene cover resists oil, grease and ozone.
Extremely durable to give years of trouble free service.
Temp, range 40"F to 200"F
ID: 3/16"
LENGTH: 25'
OD: 3/8"

ID: .117"
OD: .211"
LENGTH: 25' ROLL
COLOR: YELLOW
TYGON FUEL & LUBRICANT TUBING FOR PETROLEUM & PETROLEUM/ALCOHOL BLENDS.  
GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
FLEXIBLE & REISISTS SWELLING & BRITTLENESS.

ID: .117"
OD: .211"
LENGTH: 1'
COLOR: YELLOW
TYGON FUEL & LUBRICANT TUBING FOR PETROLEUM & PETROLEUM/ALCOHOL BLENDS.  
GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
FLEXIBLE & REISISTS SWELLING & BRITTLENESS.

Replaces OEM #: Briggs & Stratton 792020, Kohler 25-111-39-S
Size: 25' roll
ID:  1/4"

Replaces OEM #: Briggs & Stratton 792020, Kohler 25-111-39-S
Cut Length: 1'
ID: 1/4"

ID:  5/16"
LENGTH:  1'
OD:  9/16"
Ethanol Resistant

ID:  5/16"
LENGTH:  25'
OD:  9/16"
Ethanol Resistant
25' Box

Replaces Echo 900103
Fits Models: ECHO GT-200EZR, GT-201EZR, GT-200i, GT-201i, GT-200R, GT-201R, PE-200, PE-201,
PPF-210, PPF-211, SRM-210, SRM-211, SRM-210i, SRM-211i, SRM-210U, SRM-211U, SRM-210SB,
SRM-211SB, HC-150,HC-151, HC-150i, HCR-150, and HCR-151
Includes R12605 Fuel Line Grommet

Replaces STIHL 0000-930-2803, 0000-989-0516, 00009375004
Fits Stihl models FS350F, S400, FS450, FS480

Use with Homelite, Black & Decker, Husqvarna and newer Ryobi units.
Color yellow
ID: .094"
OD: .203"
WALL THICKNESS: .054
LENGTH: 25'

Use with Homelite, Black & Decker, Husqvarna and newer Ryobi units.
Color yellow
Replaces Homelite 0143918
ID: .094"
OD: .203"
WALL THICKNESS: .054
LENGTH: 1'

Replaces STIHL 1127-358-7702
For Stihl model 029, 034, 036, 039.

Complete kit includes 24" of our R1502 1/4" SAE30R7 fuel line, (1) R12619 fuel filter, and (4) R5905 1/4" fuel clamps.
Excellent for replacing one fuel line assembly for most rider units.

Replaces OEM: ECHO 90014
ID 2.5mm,
OD 5.0mm,
25 ft/roll.
FUEL LINE:  3/5

Replaces OEM: ECHO 90014
ID 2.5mm,
OD 5.0mm,
LENGTH: 1'
FUEL LINE:  3/5

Replaces OEM: ECHO: 900103, 90097, 900518
Fits Models: ECHO GT-200EZR, GT-201EZR, GT-200i, GT-201i, GT-200R, GT-201R, PE-200, PE-201,
PPF-210, PPF-211, SRM-210, SRM-211, SRM-210i, SRM-211i, SRM-210U, SRM-211U, SRM-210SB,
SRM-211SB, HC-150,HC-151, HC-150i, HCR-150, and HCR-151
Includes our R9024 fuel filter, R9607 Vent Assembly and R12598 Grommet with Fuel line

Length: 50'
Black fuel line. Fits 1/4" nipples.
Oil resistant. 50' roll.
ID: 1/4"
OD: 3/8"

Length: 1'
Black fuel line. Fits 1/4" nipples.
Oil resistant.
ID:  1/4"

Length: 50'
For 1/8" nipples (chain saw)

For 1/8" nipples (chain saw)

CLEAR FUEL LINE FOR 3/16" NIPPLE.
LENGTH:  1'
NIPPLE:  3/16"

CLEAR FUEL LINE FOR 3/16" NIPPLE.
LENGTH:  50'
NIPPLE:  3/16"

CLEAR LINE FOR 1/4" NIPPLE.
LENGTH:  1'
NIPPLE:  1/4"

CLEAR LINE FOR 1/4" NIPPLE.
LENGTH:  50'
NIPPLE:  1/4"

ID:  0.0800"
LENGTH:  1'
OD:  0.1400"
THICKNESS:  0.0300"
Tygon fuel & lubricant tubing for petroleum and petroleum/alcohol blends.
Gas and oil tubing for chain saws, small engines, snowmobiles, mowers, etc.
Flexible and resists swelling and brittleness.
Temperature Range 35 degrees below Fahrenheit to 165 degrees Fahrenheit

ID: 3/32"
LENGTH: 50'
OD: 3/16"
THICKNESS: 3/64"
Tygon LP-1200. Low Permeation and Ethanol compatible small engine fuel line
Clear Fuel Line

ID: 3/32"
LENGTH: 1'
OD: 3/16"
THICKNESS: 3/64"
Tygon LP-1200. Low Permeation and Ethanol compatible small engine fuel line
Clear Fuel Line

ID:  1/8"
LENGTH:  1'
OD:  1/4"
THICKNESS:  1/16"
Tygon fuel & lubricant tubing for petroleum and petroleum/alcohol blends.
Gas and oil tubing for chain saws, small engines, snowmobiles, mowers, etc.
Flexible and resists swelling and brittleness.
Temperature Range 35 degrees below Fahrenheit to 165 degrees Fahrenheit

ID:  3/16"
LENGTH:  1'
OD:  5/16"
THICKNESS:  1/16"
Tygon fuel & lubricant tubing for petroleum and petroleum/alcohol blends.
Gas and oil tubing for chain saws, small engines, snowmobiles, mowers, etc.
Flexible and resists swelling and brittleness.
Temperature Range 35 degrees below Fahrenheit to 165 degrees Fahrenheit

Replaces STIHL 1123-358-7701
For Stihl model 021, 023, 025

Replaces STIHL 1124-358-7700
For Stihl models MS 650, 066, MS640, MS880, 084, TS 700, 088, MS 780, TS 800, 064, MS660.

Replaces STIHL 1122-647-9400
For Stihl models 026, 034, 036, 064, 066, MS 260, 361.

ID: 1/4"
OD: 1/2"
LENGTH: 1'
Meets SAE J-30 Specifications.
Nitrile Tube is Reinforced with High Strength Rayon.
Neoprene Cover Resists Oil, Grease & Ozone. Extremely
Durable to give years of trouble free service.

ID: 1/4"
OD: 1/2"
LENGTH: 25'
Meets SAE J-30 Specifications.
Nitrile Tube is Reinforced with High Strength Rayon.
Neoprene Cover Resists Oil, Grease & Ozone. Extremely Durable to give years of trouble free service.

Length: 50'
ID:  3/32"
OD:  3/16"
COLOR: YELLOW
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES.  
RESISTS SWELLING OR HARDENING .  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW .  
MEETS ALL GOVERNMENT SPECIFICATIONS FOR CHAIN SAW & GAS ENGINES.

Length: 1'
ID:  3/32"
OD:  3/16"
COLOR: YELLOW
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES.  
RESISTS SWELLING OR HARDENING .  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW .  
MEETS ALL GOVERNMENT SPECIFICATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  1/8"
LENGTH:  50'
OD:  1/4"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHIAN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFICATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  1/8"
LENGTH:  1'
OD:  1/4"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHIAN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFICATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  3/16"
LENGTH:  50'
OD:  5/16"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHIAN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFCATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  3/16"
LENGTH:  1'
OD:  5/16"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHIAN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFCATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  1/4"
LENGTH:  50'
OD:  3/8"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFCATIONS FOR CHAIN SAW & GAS ENGINES.

ID:  1/4"
LENGTH:  1'
OD:  3/8"
SPECIAL FORMULA VINYL GAS & OIL TUBING FOR CHAIN SAWS, SMALL ENGINES, SNOWMOBILES, MOWERS, ETC.  
MAINTAINS AN AIRTIGHT SEAL ON FITTINGS EVEN IN EXTREME CLIMATES  
RESISTS SWELLING OR HARDENING  
TRANSLUCENT MATERIAL ALLOWS VISUAL INSPECTION OF FLOW  
MEETS ALL GOVERNMENT SPECIFCATIONS FOR CHAIN SAW & GAS ENGINES.