R909 Air Lift Lock Washer, Hex Nut and Screw
Replaces OEM: SNAPPER/KEES 703331, 703587,
7090228, 7090228SM, 7090391, 7090391SM,
7091297, 9-0223, 9-0228, 9-0391, 91297
Includes:
(1) 5/16"-24 x 3/4" screw
(1) 5/16" lock washers
(1) 5/16"-24 hex nut
Fits all our Snapper Air Lifts.
R3404 - 18" High Lift Blade fits Bad Boy, Encore, Ferris, Gravely, Great Dane, Hustler, Lesco, Scag and Snapper
Replaces OEM: BAD BOY: 038300000
ENCORE: 363291
FERRIS: 1521227, 5021227, 5021227S, 5101756
GRAVELY: GDU10231, 00450300, 03253800, 0450300
GREAT DANE: D18037
LESCO: 050125
SCAG: A48108, 48108, 481707, 482462, 482878
SNAPPER/KEES: 5101756, 5101756SYP
TORO: 133-2134
WINDSOR: 50-2148, 50-2295, 50-4215
WRIGHT: 71440001
Requires (2) for 36" Cut. Encore, Lesco & Scag; Mid-Size,
(3) for 52" Cut Great Dane, Lesco & Scag.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R2173 - 18" Heavy Duty High Lift Blade Replaces Bobcat 32022A
Replaces: BAD BOY: 038-3000-00, 038300000
BOBCAT/RANSOMES: 112111-02, 32022A
EXMARK: 1-303283, 103-6584-S, 1633482, 303283, 633482
GRAVELY: GDU10231
SNAPPER/KEES: 1-7037, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
WINDSOR: 50-2215, 50-2295, 50-4215
Requires (2) for 36" Cut Bobcat, Exmark,Kees & Snapper
(3) for 54" Cut Bobcat, Kees & Snapper.
Heavy Duty. Also fits Ransomes.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R3434 - 21" High Lift Blade For Great Dane, Lesco & Scag
Replaces OEM: BAD BOY: 038-6080-00, 5208425
FERRIS: 15208425, 5020842, 5020842S, 5101755, 5208425
GREAT DANE: C39949
HUSQVARNA: 539-105711, 539105711, 105711
LESCO: 050170
SCAG: A48111, 48111, 481708, 482879
SNAPPER/KEES: 5101755, 5101755BMYP
WINDSOR: 50-3160
WRIGHT: 71440003
Requires (2) for 42" Cut and (3) for 61" Cut Great Dane, Lesco & Scag.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 21"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R6197 - 19-7/16" Blade Replaces Snapper 7042998BZYP
Replaces OEM: SNAPPER/KEES 2-4466, 42998,
7024466, 7042998, 7042998BZ, 7042998BZYP
Requires (2) for 38" Cut Snapper Front Engine Rider;
Model LT1438H & Black Hawk Model BH120G38A..
C. H. DIA: 1"
CUT DIRECTION: RIGHT
LENGTH: 19-7/16"
THICKNESS: 0.2040"
WIDTH: 2-1/4"
R6294 - 18" Copperhead Mulching Universal Blade
Replaces OEM: BAD BOY: 038-0003-00
BOBCAT/RANSOMES: 32022
BUNTON-GOODALL: PL4206, 11211102, 32022A
ENCORE: 363291
EXMARK: 1-303146, 103-6584, 303146, 633482
GREAT DANE: D18037
JOHN DEERE: PT8721
LESCO: 050125, 050140, 50125, 50140
SABO: SA31853, 31853
SCAG: A48108, 48108, 481707, 481711, 48185, 482467, 482878
SNAPPER/KEES: 1-7037, 363055, 363245, 7-6450, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
TORO: 105-7779-03
WINDSOR: 51-2240, 51-2305
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R13482 - 18-1/2" Blade Replaces Snapper 1737252BZYP
Replaces Snapper OEM: 1737252, 1737252A,
1737252BM, 1737252BZ, 1737252BZYP, 1737252MA
3 blades required for 52" Zero Turn.
Also Fits Simplicity & Massey Ferguson.
C. H. DIA: 0.8050"
LENGTH: 18-1/2"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R6296 - 16-1/4" Copperhead Mulching Blade Replaces Bobcat 32061
Replaces OEM: BAD BOY: 038-4827-00
BOBCAT/RANSOMES: 32061, 32061A
EXMARK: 1-402086, 1-403059, 1-403148, 103-2527, 402086, 403026, 403059, 403086
FERRIS: 1520843, 1520843S, 5020843
SNAPPER/KEES: 483011, 7-6675, 7-7378, 7017036, 7017036BMYP
WINDSOR: 51-1935, 51-1935, 51-1940
Copperhead Mulching Universal Blade.
Fits Bobcat, Exmark, Ferris & Kees.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R1009 - 16-1/4" Blade Replaces Bobcat 112111-01
Replaces OEM: BAD BOY: 038-4826-00
BOBCAT/RANSOMES: 112111-01, 32061, 32061A
EXMARK: 1-323515, 1-403026, 103-6583-S, 1036583, 323515, 403026
FERRIS: 5020843
SNAPPER/KEES: 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
WINDSOR: 50-1930, 50-1967
Requires (2) for 32" Cut Bobcat, Kees & Snapper,
Requires (3) for 48" Cut. Standard Lift Blade.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 16-1/4"
THICKNESS: 0.1500"
WIDTH: 2-1/2"
R2172 - 16-1/4" Heavy Duty High Lift Blade Replaces Bobcat 32061A
Replaces OEM: BAD BOY: 038-4820-00, 038-4826-00
BOBCAT/RANSOMES: 112111-01, 32061A
EXMARK: 1-323515, 1-403059, 103-2527, 103-6583-S, 323515, 403059
FERRIS: 5020843, 5101986
SNAPPER/KEES: 1-7036, 5020843, 5020843A, 5020843ASM, 5101986,
5101986BMYP, 7-7378, 7017036, 7017036, 7017036BMYP, 7017036YP
Requires (2) for 32" Cut Bobcat, Kees & Snapper,
(3) for 48" Cut Bobcat, Exmark, Kees & Snapper.
Heavy Duty. Also fits Ransomes.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 16-1/4"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R6300 - 16-1/2" Copperhead Mulching Blade Fits Bunton, John Deere, Lesco, Scag & Snapper
Replaces OEM: BAD BOY: 038-5000-00, 038-5350-00, 038-5350-0050
BUNTON-GOODALL: PL4205, PL4855
ENCORE: 483049
HUSTLER: 795757
JOHN DEERE: AM104489
LESCO: 021871, 21871
SCAG: A48110, A48110, A48184, A48184
SNAPPER/KEES: 1-7043, 7075771, 7075771BZ, 7075771BZYP
TORO: 107-3195-03, 107-3196-03
WINDSOR: 51-1910, 51-1915
Fits Bunton, John Deere, Lesco, Scag & Snapper.
Requires (3) for a 48" cut.
C. H. DIA: 5/8"
LENGTH: 16-1/2"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R6472 - 16-1/2" Blade Replaces Snapper 7075771BZYP
Replaces OEM #: SNAPPER/KEES 29247, 7029247, 7075771, 75771, 7075771BZYP
Fits Snapper Yard Cruiser Model; HZS18482BVE, Homeowner Model.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 16-1/2"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
99-127 Oregon 16-1/4" Blade Replaces Snapper 1-7036
Replaces Husqvarna Turf 100340, 101366, Kees 100340 , 101366,
Snapper 1-7036, 7014036BMI, 7014036BMYP, 7014036YP, 7017036, 7076675, 7077378, 76675, 77377, 77378
Husqvarna Turf & Kees: Requires 2 for 32" cut, 3 for 48" cut, newer style models.
Snapper: Requires 2 for 32" cut, 3 for 48" cut, commercial series 2 decks.
Length: 16-1/4"
Center Hole: 5/8"
Width/Thickness: 2.50-.203
Lift: 1-1/16"
99-128 Oregon 18" Blade Replaces Snapper 1-7037
Replaces Husqvarna Turf 100341, 101485, Kees 100341, 101485, Snapper 1-7037, 17037, 77344, 7-7344
Snapper: Requires 2 for 36" cut, 3 for 52" cut, commercial, Series 2 decks, Pro Series 0, Pro 7 Series 0,1,2,4
Length: 18"
Center Hole: 5/8"
Width/Thickness: 2.50-.203
Lift: 1-1/16"
R12852 - 21-3/16" Blade replaces 1731898BZYP
Replaces OEM: Snapper, Murray 1731898, 1731898A, 1731898BZ, 1731898BZYP, 1731898MA
Fits LT-200 Series & Zero Turn Series 42". Also fits Craftsman ZTS 7500.
C. H. DIA: 0.9750"
LENGTH: 21-3/16"
THICKNESS: 0.1600"
WIDTH: 2-1/4
R2006 - 20 3/4" Blade Replaces Snapper 7019795BZYP
Replaces OEM: Snapper 1-9645, 1-9795, 7017002, 7019645,
7019702, 7019795, 7019795BZ, 7019795BZYP, 7026691
Used on Snapper 21" & 41" Steel Deck.
C. H. DIA: 3/8"
CENTER TO CENTER (OUTSIDE HOLES): 2-3/4"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 3/8"
LENGTH: 20-3/4"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R2007 - 20 11/16" Blade Replaces Snapper 7019795BZYP
Replaces OEM: Snapper 1-9795, 7019795, 7019795BZYP
Fits Steel Deck Snapper.
C. H. DIA: 3/8"
CENTER TO CENTER (OUTSIDE HOLES): 2-3/4"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 3/8"
LENGTH: 20-11/16"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R6014 - 18" High-Lift Blade Replaces Snapper 7075751BZYP
Replaces OEM: BUNTON-GOODALL: PL4206
FERRIS: 1521227, 5021227, 5021227S
SNAPPER/KEES: 1756152AYP, 1756152SYP, 29246, 7075751, 7075751BZYP
Requires (2) for 36" Cut, (3) for 52" Cut Bunton & Snapper.
Fits Snapper Pro Series. High Lift.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R6259 - 24-1/2" Formed Blade Replaces Snapper 1-6587
Replaces OEM: SNAPPER/KEES 1-6587, 525, 525GCS
Fits Kees 25" Cut High Wheel Mowers. Formed Blade.
C. H. DIA: 1"
CENTER TO CENTER (OUTSIDE HOLES): 2-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 7/16"
LENGTH: 24-1/2"
THICKNESS: 0.1870"
WIDTH: 2-1/2"
R9967 - 16-1/4" Low-Lift Blade Replaces Bobcat/Ransom 32061A
Replaces OEM: Bobcat: 32061A, Ferris: 1520843, 5020843
Husqvarna: 483011, Exmark: 1-403026, 1-403059, 1-403086
Snapper: 7077378, 7017036BMYP
Low Lift Sand Blade.
Sharpened on all 4 sides.
(2) Blades for 32" Cut - (3) Blades for 48" Cut.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2400"
WIDTH: 2"
R6167 - 21" Heavy Duty Standard Lift Blade Replaces Grasshopper 320242
Replaces OEM: COUNTRY CLIPPER: H-1667
GRASSHOPPER: 320242
SNAPPER/KEES: 1696323YP, 7-9222, 7079222, 7079371BMYP, 7079371YP
WINDSOR: 50-4080
WOODS/HESSTON: 70134
Requires (3) for 61" Cut Grasshopper, Snapper & Woods. Heavy Duty.
C. H. DIA: 1/2"
CUT DIRECTION: RIGHT
LENGTH: 21"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R6168 - 21" Heavy Duty High Lift Blade Replaces Grasshopper 320243
Replaces OEM: GRASSHOPPER: 320243, 320245
SNAPPER/KEES: 1696323YP, 7-9222, 7079222, 7079371BMYP, 7079371YP
WINDSOR: 50-2982, 50-3162, 50-4080
WOODS/HESSTON: 70142
Requires (3) for 61" Cut Grasshopper, Snapper & Woods.
Heavy Duty. High Lift.
C. H. DIA: 1/2"
CUT DIRECTION: RIGHT
LENGTH: 21"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R9968 - 18" Low Lift Sand Blade Replaces Ferris 5021227
Replaces OEM: Ferris 1521227, 5021227, Great Dane D18037, Toro 55-4210, Scag 48185
Low Lift Sand Blade. Sharpened on all 4 sides.
Requires (2) Blades for 36" Cut - Requires (3) Blades for 52" & 54" Cut.
Fits Bobcat, Encore, Exmark, Ferris, Great Dane, Husqvarna, Lesco, Scag, Snapper and Toro.
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2400"
WIDTH: 2"
R15003 - 21" Heavy Duty High Lift Blade Replaces Scag 482881
Replaces OEM: BAD BOY: 5208425
FERRIS: 15208425, 5020842, 5020842S, 5101755, 5208425
GREAT DANE: C39949
HUSQVARNA: 539105711
LESCO: 050170
SCAG: A48111, 48111, 481708, 482879, 482881
SNAPPER/KEES: 5101755, 5101755BMYP
WINDSOR: 50-3160
WRIGHT: 71440003
Requires (2) for 42" Cut and (3) for 61" Cut Great Dane, Lesco & Scag.
C. H. DIA: 5/8"
LENGTH: 21"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R10172 - 16-1/4" Flat Blade. Sharpened - 4-Sides.
Replaces OEM: Exmark: 1-403026, 1-403059, 1-403086
Ferris 1520843, 5020843, Snapper 7077378, 7017036BMYP
Flat Blade. Sharpened - 4-Sides.
(2) Blades for 32" Cut, ( 3) Blades for 48" Cut
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R9969 - 21" Low-Lift Blade Replaces Ferris 5020842
Replaces Ferris: 1520842, 5020842
Great Dane: C39949
Scag A48111
Snapper 101733
Low Lift Sand Blade.
Sharpened on all 4 sides.
Requires 3 Blades for 61" Cut.
C. H. DIA: 5/8"
LENGTH: 21"
THICKNESS: 0.2400"
WIDTH: 2"
R15006 - 18-in Heavy Duty Copperhead Mulching Blade
Replaces OEM: BAD BOY 038-0003-00
BOBCAT/RANSOM 32022
BUNTON-GOODALL PL4206
ENCORE 363291
EXMARK 1-303146, 103-6584, 303146, 633482
JOHN DEERE PT8721
LESCO 050125, 050140, 50125, 50140
SCAG 48108, 481707, 481711, 48185, 482467, 482878
SNAPPER/KEES 1-7037, 363055, 363245, 7-6450, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
TORO/WHEEL HORSE 105-7779-03
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R15002 - 18" High Lift Blade fits Bad Boy, Encore, Ferris, Gravely, Great Dane, Hustler, Lesco, Scag and Snapper
Replaces OEM: BAD BOY: 038300000
ENCORE: 363291
FERRIS: 1521227, 5021227, 5021227S, 5101756
GRAVELY: GDU10231, 00450300, 03253800, 0450300
GREAT DANE: D18037
LESCO: 050125
SCAG: A48108, 48108, 481707, 482462, 482878
SNAPPER/KEES: 5101756, 5101756SYP
TORO: 133-2134
WINDSOR: 50-2148, 50-2295, 50-4215
WRIGHT: 71440001
Requires (2) for 36" Cut. Encore, Lesco & Scag; Mid-Size,
(3) for 52" Cut Great Dane, Lesco & Scag.
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R15005 - 16.5-in Heavy Duty Copperhead Mulching Blade
Replaces OEM: BAD BOY: 038-5000-00, 038-5350-00, 038-5350-0050
BUNTON-GOODALL: PL4205, PL4855
ENCORE: 483049
HUSTLER: 795757
JOHN DEERE: AM104489
LESCO: 021871, 21871
SCAG: A48110, A48110, A48184, A48184
SNAPPER/KEES: 1-7043, 7075771, 7075771BZ, 7075771BZYP
TORO: 107-3195-03, 107-3196-03
WINDSOR: 51-1910, 51-1915
Fits Bunton, John Deere, Lesco, Scag & Snapper.
Requires (3) for a 48" cut.
C. H. DIA: 5/8"
LENGTH: 16-1/2"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R1091 - 26" Blade Replaces Snapper 7018068BMYP
Replaces OEM: Snapper/Kees 1-8068, 7018068, 7018068BMYP, 7018068YP
Fits Snapper rear engine.
Uses the 2 Bolt Hole.
Regular Air Lifts Rotary R1131.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 26"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R6110 - 20-11/16" Mulching Blade Replaces Snapper 7041939BZYP
Replaces OEM: SNAPPER/KEES 1-7168, 17002,
19645, 19702, 19710, 26691, 7017168, 7026691,
7026691BZ, 7026691BZYP, 7041939, 7041939BZYP
Mulching Blade for 21" Snapper Steel Deck.
C. H. DIA: 3/8"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 3/8"
LENGTH: 20-11/16"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R13799 - 18" Heavy Duty Copperhead Mulching Blade
Replaces OEM: BAD BOY 038-0003-00
BOBCAT/RANSOM 32022
BUNTON-GOODALL PL4206
ENCORE 363291
EXMARK 1-303146, 103-6584, 303146, 633482
JOHN DEERE PT8721
LESCO 050125, 050140, 50125, 50140
SCAG 48108, 481707, 481711, 48185, 482467, 482878
SNAPPER/KEES 1-7037, 363055, 363245, 7-6450, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
TORO/WHEEL HORSE 105-7779-03
C. H. DIA: 5/8"
LENGTH: 18"
THICKNESS: 0.2500"
WIDTH: 3"
This is a wide heavy duty version of our R15006 Copperhead Mulching Blade.
R15008 - 16-1/4" Heavy Duty Copperhead Mulching Blade Replaces Bobcat 32061
Replaces OEM: BAD BOY: 038-4827-00
BOBCAT/RANSOMES: 32061, 32061A
EXMARK: 1-402086, 1-403059, 1-403148, 103-2527, 402086, 403026, 403059, 403086
FERRIS: 1520843, 1520843S, 5020843
SNAPPER/KEES: 483011, 7-6675, 7-7378, 7017036, 7017036BMYP
WINDSOR: 51-1935, 51-1935, 51-1940
Copperhead Heavy Duty Mulching Universal Blade.
Fits Bobcat, Exmark, Ferris & Kees.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R13814 - 16-1/4" Wide Heavy Duty Copperhead Mulching Blade
Replaces OEM: BAD BOY: 038-4827-00
BOBCAT/RANSOMES: 32061, 32061A
EXMARK: 1-402086, 1-403059, 1-403148, 103-2527, 402086, 403026, 403059, 403086
FERRIS: 1520843, 1520843S, 5020843
SNAPPER/KEES: 483011, 7-6675, 7-7378, 7017036, 7017036BMYP
WINDSOR: 51-1935, 51-1935, 51-1940
Copperhead Wide Heavy Duty Mulching Universal Blade.
Fits Bobcat, Exmark, Ferris & Kees.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2500"
WIDTH: 3"
R10174 - 21" Flat Blade Replaces Ferris 5020842
Replaces OEM: Ferris: 1520842, 5020842
Great Dane: C39949
Scag: A48111
Snapper: 101733
Flat Blade. Sharpened - 4 Sides.
Requires (3) Blades for 61" Cut.
C. H. DIA: 5/8"
LENGTH: 21"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
R1060 - 33" Blade Replaces Snapper 7019523BZYP
Replaces OEM: Snapper/Kees 1-9523, 7019523, 7019523BZ, 7019523BZYP
New Style. Uses the 3 Bolt Hole. High Air Lifts R1136.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 33"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R1092 - 30" Blade Replaces Snapper 7018069BZYP
Replaces OEM: Snapper/Kees 1-8069, 7018069, 7018069BZ, 7018069BZYP
Fits Snapper rear engine rider.
New Style.
Uses the 2 Bolt Hole.
Regular Air Lifts R1131.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 30"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R1098 - 28" High LIft Blade Replaces Snapper 7019515BZYP
Replaces OEM: Snapper/Kees 1-8069, 7018069, 7018069BZ, 7018069BZYP
Fits Snapper. New Style.
Uses the 3 Bolt Hole.
High Air Lifts R1136.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 28"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R1103 - 25" Blade Replaces Snapper 7019518BMYP
Replaces OEM: Snapper/Kees 1-9518, 7019518, 7019518BMYP, 7019518YP
Fits Snapper. New Style.
Uses the 3 Bolt Hole.
High Air Lifts R1136.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 25"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R3329 - 25" Heavy Duty High Lift Blade Replaces Bobcat 42139B
Replaces OEM: BOBCAT/RANSOMES: 112111-04, 42139B
FERRIS: 22476, 5022476
SNAPPER/KEES: 5102227
For Bobcat/Ransomes: Requires (3) blades for 74" cut.
For Ferris: Requires (3) blades for 72" cut.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 25"
THICKNESS: 0.2400"
WIDTH: 2-1/2"
R13798 - 21" Wide Heavy Duty Copperhead Blade Replaces Scag 481712
Replaces OEM: SCAG: 481712
Fits BobCat, Bunton, Encore, Ferris,
Great Dane, Husqvarna, Hustler, Kees,
Lesco, Snapper, Wright and others.
This is a wide heavy duty version of R15007 Copperhead Mulching Blade.
C. H. DIA: 5/8"
LENGTH: 21"
THICKNESS: 0.2500"
WIDTH: 3"
R6029 - 30" Blade Replaces Snapper 7018069BZYP
Replaces OEM: SNAPPER/KEES 1-8069, 7018069, 7018069BZYP
No air lift holes, new style.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 30"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
R6108 - 28" Mulching Blade Replaces Snapper 7016980BZYP
Replaces OEM: SNAPPER/KEES 1-6980, 7016980, 7016980BZ, 7016980BZYP
Mulching Blade for 28" Snapper Rear Engine Riders.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 28"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R6109 - 33" Mulching Blade Replaces Snapper 7024741AYP
Replaces OEM: SNAPPER/KEES 1-6982, 7016982, 7024741AYP, 7024741BZ
Mulching Blade for 33" Snapper Rear Engine Riders.
C. H. DIA: 1-1/16"
CENTER TO CENTER (OUTSIDE HOLES): 7-1/2"
CUT DIRECTION: RIGHT
DIAMETER OF OUTSIDE HOLES: 35/64"
LENGTH: 33"
THICKNESS: 0.1600"
WIDTH: 2-3/4"
R6302 - 28" Coppherhead Mulching Blade Replaces Snapper 7019515BZYP
Replaces OEM #: SNAPPER/KEES 1-9515, 7019515, 7019515BZ, 7019515BZYP
Fits Snapper Models: 250610T, 250612T, 25062, 25062S, 25063, 25063S, 25064,
25064S, 25065, 25065S, 25066, 25066S, 25069T, 250811BE, 250812BE, 250813BE,
250814B, 250814BE, 250815B, 250815BE, 250816B, 250816BE, 25083, 25083S,
25084, 25084BS, 25084S, 25085, 25085S, 25086
C. H. DIA: 1-1/16"
LENGTH: 28"
THICKNESS: 0.1870"
WIDTH: 2-3/4"
For High Lift Blade, use R1098
