Replaces EXMARK 1-633581, SCAG 43584
Fits Lazer Z units.
Fits our R9803, R9804, R9809 wheels.
Spacer for front wheel, bearing & seal.
ID: 3/4"
OD: 1-1/8"
WIDTH: 5/8"

Replaces EXMARK 3322154, Husqvarna 539102484
Used on Exmark 3322154 wheel assembly & our R8197 wheel assembly for Gravely.
OD 1-1/2" (38.10MM), ID 3/4" (19.05MM). THE O.D. ON THE FIRST STEP IS 1.390".

HEIGHT:  9/16"
ID:  7/8"
OD:  1-31/64"

Height: 5/8"
ID: 7/8"
OD: 1-1/8"

DIAMETER: 1"
HEIGHT: 5/8"

Replaces; Bunton-Goodall PLO928, Exmark 303041, 1-303041, Snapper/Kees 7-6515, 7076515, 7076515YP
Used on Bunton support arm PAL-0937A
HEIGHT: 1-1/4"
ID: 7/8"
OD: 1-1/8"

Replaces Exmark 513810
ID: .75"
OD: 1.383"
Width .375"

Replaces EXMARK 1-633580, 103-0063, 633580
FERRIS 5022631SX3, Great Dane D38065
SCAG 482622
Fits Exmark Lazer Z Unites
ID: 1-1/8"
OD: 1-3/4"
WIDE DIAMETER: 7/16"

Replaces Exmark 513547, 1-513547
HEIGHT: 4-5/8"
ID: 1/2"
OD: 3/4"

Replaces Exmark 1-633579
Fits Exmark Laser Z 13 x 500 x 6wheels.
Used with our R9804 wheel.
ID 1/2"; OD 3/4"; Length 5-7/8"

Replaces Exmark 1-633959, Scag 43583, Toro E633959
Fits Exmark Laser Z 13X650X6 Wheels
ID: 1/2"
LENGTH: 7-1/2"
OD: 3/4"

Replaces; EXMARK 603602, OREGON 48-007, STENS 225-205, SUNBELT B1CO86 & SUNBELT B1SB8586.
Fits in wheel 603299 on Exmark commercial mowers. Models Turf Ranger, Turf Tracer Explorer.
ID 3/8", OD 5/8", Length 2-13/16", Flange OD 1"

Replaces Exmark 103-2477
HEIGHT: 0.7080"
ID: 1"
OD: 2.0475"
Bearing No. RA100RR7

Replaces Exmark 103-3037
Splined blade bushing for all Exmark blades with 0.94" center hole.
FITS OUR R13005 & R13540 Spindle assemblies.
HEIGHT: 1"
ID: 1/2"
Flange OD: 1-3/4"

Replaces OEM: Bobcat: 38046N, Bunton: PL0678, Exmark: 1-303051, Jacobsen: 552234,
John Deere: AM122119, Kees: 363181, Lesco: 021870, Bearing Ref No: 6202-2RS,
Scag: 48224, Snapper: 1-4514, 7-7324, 7014514, 7014514YP,
Fits Models:
Bobcat Variable speed units
Jacobsen Crew King
John Deere Units with variable speed transmissions
Snapper tractors, pro gear drive loop handle series 0, 1, 2, 4; 36" V
and 48" pro deck attachment series 0, 2, 4; pro gear drive pistol grip series 1, 2, 4 for disc drive
Specs:
ID: .625"
OD: 1.375"
Height: .430"
Double seal

Replaces Exmark 513809, 1-513809
HEIGHT: 3-23/32" ID: 49/64" OD: 1-1/4"

Replaces; EXMARK 513336, 1-513336
Fits models Turf Ranger. (nylon) (black)
FLANGE OD: 1-5/8"
HEIGHT: 11/16"
ID: 15/16"
OD: 1-1/4"

Replaces EXMARK 513009, 631560, 1-631560
HEIGHT: 1/2"
ID: 1/2"
OD: 1-3/8"
Fits front caster wheels.

Replaces Exmark 1-513012, 513012
Includes locking collar and set screw.
HEIGHT: 1-3/4"
ID: 1"
OD: 2"

Roller cage bearing with retainer bushings only.
Replaces Exmark 513809.
Roller cage bearing OD 1-1/4" (31.75 mm), ID 49/64" (19.45 mm), Length 3-23/32" (94.46 mm).
Retainer bushings OD 1-1/2" (38.10 mm), ID 3/4" (19.05 mm), Height 3/8" (9.53 mm).
Size: ID 49/64", OD 1-1/4", Length 3-23/32"

Replaces: BOBCAT/RANSOM 35008N
BUNTON-GOODALL PL4611, PLO609
EXMARK 1-303057, 1-303543, 303543
FERRIS 46363-5
HUSTLER 783555
JOHN DEERE 9467
SCAG 483303
SNAPPER/KEES 1-9125, 7-6510, 7019125, 7019125YP
Bearing No. 6305-2RS, 6305DU
HEIGHT: 21/32"
ID: 25 mm
OD: 2-7/16"

* This part replaces: 01009917, 750-3197

Kit Replaces Exmark 110-8837
Includes (2) R813 bearings, (2) R10013 seals, and (2) R10064 spacers.
Fits Laser Z units.
Used in our R9803, R9804, and R9809, R10286, R10288 wheel assemblies.
ID: 3/4"
OD: 1-25/32"

Fits Exmark midsize mowers with 36", 48", 52", 60" decks.
Fits Exmark wheel 322154. Fits Turf Ranger, Turf Tracer & Viking metro models from 80000 series and higher.
Kit contains our R8408 roller cage bearing with retainer bushings and R8409 spanner bushing.
Size: ID 1/2", OD 1-3/8", Length 4-21/32"

Bobcat/Ransomes 35062B, Exmark 1-303067, 303067
Output Shaft Support Bracket Bearing.
Used with our R8184 Flange.
HEIGHT: 7/8"
ID: 5/8"
OD: 1-9/16"
THICKNESS: 0.3543"

Replaces OEM: EXMARK 109-2064
Fits ExmarkLazer Z Triton decks
Takes 2 per unit, comes without O-Ring.
HEIGHT: 1.2570
ID: 1.1170
OD: 2.1660