Replaces (OEM): MTD 731-0778, 731-0812, 731-1033
Use with our R5521 paddle set.
LENGTH:  19-7/8"
MOUNTING HOLES:  1"
WIDTH:  2-1/8"

* This part replaces: 706-14240, 731-0722, 731-0778, 731-0812

Fits 22" MTD two-stage Snow Thrower models 611D, 611D & 623D
Kit includes:
(1) R5591 - 22 Inch Snow thrower Shave Plate 2.25 x 21.66 replaces MTD 790-00117-0637
(2) 8828 - Snow Thrower Skids replaces MTD 784-5580
(8) 121253 - 5/16-18 x .750 Snow thrower Carriage Bolts and Nuts replaces MTD 710-0451, 712-04063

Fits 24" MTD two-stage Snow thrower models, 1992 to Current.
Kit Includes:
(1) R5592 - 24 Inch Snow thrower Shave Plate. 2.25 x 23.66 replaces MTD 790-00120-0637
(2) 8828 - Snow thrower Skid replaces MTD 784-5580
(8) 121253 - 5/16-18 x .750 Snow thrower Carriage Bolts and Nuts replaces MTD 710-0451, 712-04063

Replaces Part Number OEM-784-5579, OEM-784-5579A, 784-5579A, 784-5579A-0629, 784-5579A-0637, 784-5579A-0638, 784-5579A-0667, 784-5579A-0689, 784-5579A-0691, 784-5579A-0692, 790-00121-0637
26 Inch Snow thrower Shave Plate. 2.25 x 25.66.
Fits 26" MTD two-stage Snowthrower models, 1992 to Current.

Replaces MTD 706-15945-02, 784-5244
Mounting holes are 6-9/16" apart.

Fits 26" MTD two-stage Snow thrower models, 1992 to Current.
Kit includes:
(1) R5593 - 26 Inch Snow thrower Shave Plate. 2.25 x 25.66 replaces MTD 790-00121-0637
(2) 8828 - Snow Thrower Skids replaces MTD 784-5580
(8) 121253 - 5/16-18 x .750 Snow thrower Carriage Bolts and Nuts replaces MTD 710-0451, 712-04063

Fits 28" MTD two-stage Snow thrower models, 1992 to Current.
Kit includes:
(1) R5594 - 28 Inch Snow thrower Shave Plate. 2.25 x 27.66 replaces MTD 790-00118-0637
(2) 8828 - Snow Thrower Skids replaces MTD 784-5580
(8) 121253 - 5/16-18 x .750 Snow thrower Carriage Bolts and Nuts replaces MTD 710-0451, 712-04063

Fits 30" MTD two-stage Snow thrower models, 1992 to Current.
Kit includes:
(1) R5595 - 30 Inch Snow thrower Shave Plate. 2.25 x 29.66 replaces MTD 790-00119-0637
(2) 8828 - Snow Thrower Skids replaces MTD 784-5580
(8) 121253 - 5/16-18 x .750 Snow thrower Carriage Bolts and Nuts replaces MTD 710-0451, 712-04063

Replaces MTD 784-5575, 784-5575-0637
2.25 x 29.66

Replaces (OEM):
ARIENS 01016500, 02459951, 02483851, 02483859
JOHN DEERE M124413, M144012
MTD 05002, 05002-0637
DOUBLE SIDED, REVERSIBLE RUNNER FITS ALL ARIENS SNOWBLOWERS FROM 60's UNTIL PRESENT.
USED ON ARIENS MODELS 924080 WITH 24' AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & BLACK IN COLOR.
Length: 5 3/4"
Width: 3 5/8"
Height: 1 1/16"
7/16" W x 1 3/4" slot
Slots are 3" apart
Bolt slots are 3" center to center
BLACK IN COLOR.

Replaces (OEM): BOLENS 174-1179, 1741179
Fits models 225, 300 and 350.
Length: 19-3/8"
Width: 1-5/8"  
Five 1/4" mounting holes.

Replaces (OEM):ARIENS 2459900, 02483859, 24599, 02459900
Fits ALL ARIENS 1960 UNTIL PRESENT. FITS ARIENS MODELS: 924080 & 924082 WITH 24" AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & SIMPLICITY
Length: 5 13/16"
Width: 3"
Height: 1"
Slot: 7/16" W x 1 3/14"
Bolt slot: 3" center to center

Replaces (OEM): MTD 784-5038A, 784-5038B, 784-5038B-0637
Fits models 449, 450, 550, 552, 586 & 588.
Inside Diameter: 10"
Outside Diameter: 10-1/4"
Width: 3-1/2"
Slot Size: 1/2" x 3-1/4"
5 Slots 1-17/32" apart

Replaces (OEM): MTD 784-5580 & 984-5580
Fits all two stage MTD units.
Slots are 2-3/4" apart.

Replaces OEM #: MTD 05002-0637.
Fits 1988 & 1989, 20" & 26" snowblowers models 225 & 590.
Slots are 3" apart.
Height:  3/4"
Length:  5-1/4"
Width:  3-1/8"

MTD Part # 05378, 05378-0637

Replaces OEM #: MTD 05002-0637.
Fits 1988 & 1989, 20" & 26" snowblowers models 225 & 590.
Slots are 3" apart.
Height:  3/4"
Length:  5-1/4"
Width:  3-1/8"
Includes Two Skids

Fits White models ST800, 850, ST950, 1050, Ariens models ST524, ST824, ST924.
Also fits many Toro, MTD, John Deere, Noma, Murray, Snapper & Argo Allis models.
Slots are adjustable between 2" and 3" apart.

* This part replaces: 1724868, 1728567, 1728567010, 1728567021,
1728567BDG, 1728567GAR, GW-1728567001, GW-1728567010, GW-B1728567GAR
Fits many Bolens, Troy-Bilt, Cub Cadet, and White Outdoor Snow Blowers.
Overall width: 8 1/4"
Height: 2 5/8"
Slot size: 7/16" X 1 1/2"
Slots center to center: 3"

MTD/Bolens/Troybilt Part # 1758136, 1758136010, 1758136021,
1758136BDG, 1758136GAR, GW-1758136001, GW-B1758136GAR

MTD/Bolens/Troybilt Part # 1720885001, GW-1720885001
Fits the following Bolens Models:
1026 26" (S/N 0600667)
726 (S/N 0200101-0299999)
Uses 5/16"-18 x .750" carriage bolt

790-00091-0637 Genuine MTD Black Snow Thrower Slide Shoe
Replaces MTD 790-00091

Replaces (OEM): MTD 731-06472, 490-241-0010
Fits Most Fits AYP, Ariens, MTD, Craftsman, Murray & Toro 2 Stage Snow Throwers.
Helps protect driveways, walkways, garages and porches from snow-blower damage.
Non-abrasive material helps prevent scratches.
High-strength polymer material resists rust.
Reversible for longer life.
Includes hardware.
Designed to protect driveways, walkways, garages and porches from scratches created by traditional slide shoes.

* This part replaces: 784-5581

Skid Shoe for Craftsman Snowblower Attachments

* This part replaces: 1107385, 1540-049, 1540-086, 1540-170, 736-0326, 753-05706, GW-1107385, IH-62942-C1, YS-736-0326

Replaces (OEM): MTD 784-5038A, 784-5038B, 784-5038B-0637
Fits models 449, 450, 550, 552, 586 & 588.
Inside Diameter: 10"
Outside Diameter: 10-1/4"
Width: 3-1/2"
Slot Size: 1/2" x 3-1/4"
5 Slots 1-17/32" apart
Includes Two Skids

Contains two each of MTD
731-05984, 731-05984A Polymer Slide Shoes
710-0276 Carriage Screw, 5/16-18 x 1.00
936-0159 Washer, Flat, .349 x .879
712-04063 Flange Lock Nut, 5/16-18
**These polymer shoes will work in replacement for 790-00091-0637 metal shoes

Replaces OEM: MTD: 784-5576, 784-5576-0637, 790-00117-0637, OEM-784-5576
Fits Models: MTD 22" two-stage snowthrowers, 1995 and newer
Length: 22 "
Width: 2 1/4 "
ID: .474 "
Thickness: .105 "
4 mounting holes

Replaces OEM: MTD: 784-5581A-0637, 784-5581A-0687, 790-00120-0637, OEM-784-5581
Fits Models: MTD 24" two stage snow throwers, 1992 and newer
Length: 24 "
Width: 2 1/4 "
ID: 1/2 "
Thickness: 1/8 "
4 mounting holes

Replaces OEM: MTD: 784-5579-0638, 784-5579-0692, 784-5579A-0629, 784-5579A-0667, 784-5579A-0691, 790-00121-0637, OEM-784-5579, OEM-784-5579A
Fits Models: MTD 26" two-stage snow throwers, 1992 and newer
Length: 26 "
Width: 2 1/4 "
ID: .473 "
Thickness: .108 "
4 mounting holes

Replaces OEM: MTD: 784-5582a-0637, 790-00118-0637, OEM-784-5582, OEM-784-5582A
Fits Models: MTD 28" two-stage snow throwers, 1992 and newer
Length: 28 "
Width: 2 1/4 "
ID: .474 "
Thickness: .109 "
4 holes for mounting

Replaces MTD 784-5575, 784-5575-0637
Fits Models: MTD 30" two-stage snow throwers, 1992 and newer
LENGTH: 29.6600"
WIDTH: 2.2500"
Thickness: .109 "
4 holes for mounting