Included in our R8621 hardware kit for tillers
SIZE: 3/8"

* This part replaces: 01000369, 1100043, 1110043, 1509-091,
1509-117, 153015, 2050511, 2050611, 457176, 706-10123-20,
706-501277-1, 710-0342, 910-3005, BN-Z24008, GW-1100043,
GW-1110043, GW-90029, GW-90043, GW-9712, GW-B1100043,
GW-L-90040, GW-T70238, IH-180124, IH-18495-R1, YS-710-3005

* This part replaces:     714-0149,   714-0149B,   714-0149BP

Replaces MTD Troy Bilt: 1124, 1124-2, GW-1124
Thickness .010"

SCR:F:5/16-18:.750:HHWSH WHIZ

* This part replaces: 1113-1, GW-1113, GW-1113-1, GW-1113-2
.50" Inside Dia.
.375" Outside Dia.

Replaces Part Number 2146
BUSHING-.5X.375X.325

Replaces Part Number 9120

* This part replaces: 9855, GW-9855

* This part replaces: 1916712, GW-1916712

Replaces MTD Troy Bilt: 1129-2, GW-1129-2
Thickness: 0.030"

Replaces MTD Troy Bilt: 1129-1, GW-1129-1
Thickness: 0.010"

This part replaces: 01000371, 710-0644, IH-251231-R1
Fits Models:
Bolens- 21A-250H765
Craftsman- 21AB47M6099, 24AF570L799
Yard Machines- 24AF550C729, 24AF551D700, 24AF572B729

* This part replaces: 731-10069B, 731-10069A, 731-10069C

Replaces Part Number 9119

This part replaces: 00009678
Fits Models: Craftsman Wide Area Mower- 55AC5GMR099, Craftsman Wide Area Mower- 55AC5GMR299

PIN-CLEVIS 1/2 X 4.375 ZT/MM

Replaces OEM#:AMF / DYNAMARK / NOMA 20317, BOLENS 110-8453,170-3085,170-5061,171-4251, FATE - ROOT-HEATH 1330, HOMELITE/JACOBSEN 04393A,313775,314804,324136,372780,REM1415,
MASSEY FERGUSON 51432M1, MTD 754-0126,754-0156,754-0232,7595,954-0156,954-0232,
McLANE 4060, TORO / WHEEL HORSE 1556,271-16, YAZOO 205-020
Premium Belts have a protective cover made of a synthetic rubber compound
having excellent resistance to heat, oil and abrasion.
Length:20" Width:1/2"

Replaces OEM#:BOLENS 110-8463,172-0573, E-Z ROLL S-335, EDKO 20824, HOMELITE / JACOBSEN 2058, LITTLE WONDER 177, MTD 754-0107,754-0196,954-0107,954-0196, TORO / WHEEL HORSE 1561,1573, McLane 2058.
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:30"
Width:1/2"

Fits Ariens, Briggs & Stratton 493988, Bolens, Cub Cadet, John Deere, Gilson, Gravely, Homelite, Jacobsen, MTD, Simplicity, Snapper and Toro.

Replaces (OEM): Troy-Bilt 742-04117, 742-04117-0637
Fits Models: Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Fits left hand
Bolo Tine: 10"
Center to Center: 2-5/8"
Two Bolt Holes: 3/8"

Replaces (OEM): Troy-Bilt 742-04116, 742-04116-0637
Fits Models: Troy Bilt Bronco, Pro-Line & Tuffy from 2005-UP

Fits right hand
Bolo Tine:  10"
Center to Center:  2-5/8"
Two Bolt Holes:  3/8"

Replaces OEM#:BOLENS 189-4272, TORO / WHEEL HORSE 1593  
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Fits Bolens Snowblower Model 826
Width: 3/8" (9.53mm)
Length: 35" (889mm)

to make sure this belt fits your model 826, please call us with your machine's serial number

Replaces (OEM): BOLENS 110-8467, 172-5253 & 180-0365, K & S TRIM ALL 4L340, MTD 754-0192 & 954-0192, ROTOTILLER 28151, TANAKA 754-0192, TORO/WHEEL HORSE 28-8630.
Fits Bolens Snowblower Model 826
Width: 1/2" (12.70mm)
Length: 34" (863.6mm)

to make sure this belt fits your model 826, please call us with your machine's serial number

Replaces (OEM): SIMPLICITY/ALLIS CHALMERS 1657806 (4hp), BOLENS 110-8469, 173-6279, MURRAY 37X5
Width: 1/2" (12.70mm)
Length: 36" (914.4mm)

Replaces OEM#:AYP / ROPER / SEARS STD324370, BOLENS 110-8470, 181-3220, GILSON 16366 (5HP), MTD 754-0154, 754-0255, 954-0154, 954-0255, MURRAY 337X6, ROTO-HOE 1079, STEINER 81A035, SWEEPSTER 06-0165, TORO / WHEEL HORSE 1552, 19-2650, YARDMAN 754-0225
Premium Belts have a protective cover made of a synthetic rubber compound
having excellent resistance to heat, oil and abrasion.
Length:37" Width:1/2"

Replaces OEM#:ARIENS 07234000, 07234 BOLENS 172-6929,
GILSON 14790, 37230, MAXIM 320372204, SOUTHLAND SP2-700,
TORO / WHEEL HORSE 271-104, 3-8445, YARDMAN 754-275
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length: 38"
Width: 1/2"

Replaces OEM#: Agri-Fab 46960, BOLENS 110-8473, GILSON 16386, 35545, MTD 754-0244, 954-0244, PRO 7520031, STEINER 81A38, TORO / WHEEL HORSE 16-9670, 23-9080, 25-0105, 26-9670
Premium Belts have a protective cover made of a synthetic rubber compound
having excellent resistance to heat, oil and abrasion.
Length:40" Width:1/2"

* This part replaces: GW-1915089

Replaces OEM#:BOLENS 110-8476, 172-5603, 173-2880, 174-1578, GILSON 17569, MTD 754-0109, 754-0253, 954-0109, 954-0253, MURRAY 37X23,
PRO 7524026, ROTO-HOE 1078, 2430, 5065C, STEINER 81A041, TORO / WHEEL HORSE 1587, 3-6348, WHITE OUTDOOR 0109
V-BELT FOR SNOWBLOWERS
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:43"
Width:1/2"

Replaces MTD 754-04088
WIDTH: 1/4"
LENGTH: 33"

Replaces OEM #: AIRCAP 11604
AMF/DYNAMARK/NOMA 49907, 56922
ARIENS 01190600, 02456500, 52406900
AYP/ROPER/SEARS 135944
CUB CADET 725-3232, 925-0873
EXMARK 1-403121, 403121
FERRIS 1521842, 5021842
GREAT DANE D18090
HOMELITE/JACOBSEN GP-57823-8, JA13064-1
LAWNBOY 1-403121, 700171, 740015
LESCO 10943
MTD 925-0873
MURRAY 056419, 056419MA, 56419
SCAG 48609
SIMPLICITY/ALLIS CHA 1664804, 1664804SM
SNAPPER/KEES 17817, 28765, 7017817, 7028765, 7817
TROY BILT 1758145
Multi-application ignition switch fits single stage Simplicity & Snapper snowthrowers.
Includes key, lockwasher nut & cover.
2 TERMINALS/ 2 POSITIONS. INDAK Q431.

Replaces MTD 954-05110
WIDTH: 3/8"
LENGTH: 26.3750"

* This part replaces: 1086, 741-04300, GW-1086, GW-1086099, GW-11-1044, GW-11-1086
1.25 x 1 x .005 x 1.5

Replaces SCAG 48609, SNAPPER 7017817, Troy Bilt GW-1758145, MTD & Troy Bilt 925-0873,
EXMARK 1-403121, SIMPLICITY 1664804SM, MURRAY 7017817YP.
Ignition Switch Magneto, 2 Positions, 2 Terminals, 5/8" mounting stem.
Includes Hardware.
On/off switch.

Replaces MTD 954-04260
WIDTH: 3/8"
LENGTH: 34.1300"

Replaces OEM #: Troy Bilt 9245
Fits Troy Bilt 4 speed Horse models
LENGTH:  22-1/4"
WIDTH:  1/2"

Replaces (OEM): TROY BILT 1128-1
Fits Models: TROY BILT 2 speed horse models, serial numbers 1001 to 314150
Raw edge, laminated, fiberglass cord construction
LENGTH:  21-3/4"
WIDTH:  1/2"

Replaces MTD 954-04201A
WIDTH: 3/8"
LENGTH: 35.5600"

Replaces MTD/Troy Bilt  Part Number 742-04117, 742-04117-0637
Used for Bronco, Super Bronco and Pro-Line Models.

Replaces MTD/Troy Bilt  Part Number 742-04116, 742-04116-0637
Used for Bronco, Super Bronco and Pro-Line Models.

Replaces Part Number 9602, GW-9602, 9616, 9618, GW-9616, GW-9618
Outside Diameter 2"
Inside Diameter 1.25"

* This part replaces: 1900879004, 1900879010, 2424, GW-1114, GW-2424

Replaces MTD 954-04195A
WIDTH 1/2"
LENGTH 36.9700"

Replaces MTD 954-04194A
WIDTH: 1/2"
LENGTH: 44.6000"

Replaces (OEM): ARIENS 00170800, 3003 & 00300300, CASE C22891, GILSON 18915 & 32222,
HOMELITE/JACOBSEN 158458 & 990152, JOHN DEERE AM122115, LAWN-BOY 741316, LESCO 050559,
MURRAY 35550, SNAPPER/KEES 1-0765 & 7010765 & 7018782, TROY BILT 1720859.
Fits ARIENS ST824DLE, ST928LE, ST1024, ST1028 & ST1132,
Fits TROY BILT 42010, 42012, 42033, 42034, 42036, 42039, 42040 & 42041 self-propelled mowers; 42051 & 42052 snowblowers.  
Fits John Deere 828D, 924DE, 1032D, 1128DE, 1128DDE, 1332DDE Walk Behind Snowblowers.
Also fits Sears Rider made by Murray.
ID: 3"
OD: 6"
Drive disc has been ground to remove the center rib for improved performance and smoother operation.

* This part replaces: GW-1051, GW-1051-A, GW-9346

Raw Edge 3L Belt
.375" x 31"

Replaces (OEM): TROY BILT GW-2111, 2111, 88174, 756-04171
Used on Troy Bilt newer Horse Models: DP630-1260 Since 1989.
ID: 3/8"
OD: 3-3/4"

Replaces 1270-2, 1270-2A, GW-1270-2, GW-1270-2A, 742-04118
Fits Troy Bilt Big Red, Horse, Econo Horse, and Pony Tillers
Fits Tillers with BOTH Cast Iron, and Welded Steel Tine Holders

* This part replaces: GW-1765197

Forward Drive Belt, Replaces Part Number 9245, GW-56035
Single "V" for four-speed tillers

Hardware included:
(32) 3/8" - 1, grade 5 cap screw.
(32) 3/8" - Lock Washer
(32) 3/8" - 16 Zinc Hex Nut

Replaces 1270-1, 1270-1A, GW-1270-1, GW-1270-1A, 742-04119
Fits Troy Bilt Big Red, Horse, Econo Horse, and Pony Tillers
Fits Tillers with BOTH Cast Iron, and Welded Steel Tine Holders

Replaces Troy-Bilt 9201

Replaces MTD 725-0803B, 725-0803C, 925-0803C

Replaces Troy-Bilt 9200

Replaces MTD Troy Bilt: 1121A

Replaces Troy-Bilt 90252
V-BELT-REV DRIVE-ECONO

Cogged 3L Belt
.375" x 32"

Replaces GW-1772310, GW-56032

Replaces OEM: CUB CADET 725-3163, 925-3163
TROY-BILT, BOLENS 1726169, 1754183, 1754183099

Replaces Troybilt 1128-1

* This part replaces: 1900867004, 1900867010, 1900867021,
GW-1900867001, GW-1900867010, GW-1900867021, GW-2121

* This part replaces: GW-1752194, GW-B1752194
36-in Length
3/8-in Top Width

* This part replaces: GW-1917356, 42035

Replaces 747-05226-0637
Frame for MTD grass bag part number 964-04117B

**Additional Shipping Charge will be applied when ordering this part. SPECIAL ORDER.

Replaces OEM #: Troybilt 1739944
Raw Edge 4L Belt
.5" x 37.5"

Replaces Part Number GW-1714, 1714, 741-0107
3/4 inch.

Replaces CUB CADET 725-3163A

Replaces MTD Part Number 618-0245, 618-0245A

* This part replaces: 1764906, GW-1769830

* This part replaces: 786-0005

Replaces MTD Troy Bilt GW-2475-1
to purchase the whole Tiller Tine Set, Choose GW-10802
Special hard-faced, high-chrome carbon alloy tine that is thicker and lasts up to 2-1/2 times longer than a standard Bolo Tine.
This tine better resist the abrasive action of rocky, gritty or sandy soil as compared to a standard Bolo Tine.

Replaces MTD Troy Bilt GW-2475-2
to purchase the whole Tiller Tine Set, Choose GW-10802
Special hard-faced, high-chrome carbon alloy tine that is thicker and lasts up to 2-1/2 times longer than a standard Bolo Tine.
This tine better resist the abrasive action of rocky, gritty or sandy soil as compared to a standard Bolo Tine.

Replaces (OEM): TROY BILT GW-2111, 2111, 88174, 756-04171

Replaces GW-1739945
Raw Edge 4L Belts
.5" x 37.5"

* This part replaces: 1133-1A, GW-1133, GW-1133-1, GW-1133-A
belt adjustment, 3-3/4" long, for two-speed tillers, Serial# 314150 & below. Has cast-in neutral position. Replaces 3/4" steel bar (completely flat) used previously. Includes bolt, lockwasher & washer.