Old Style Rubber Grommet used on Honda filters.

Replaces Bunton-Goodall Z35010
Wheel Washer fits Bunton 36", 48", 52" & 61" Cut Midsize Front Cut Riders.
Fits Honda HRC 7013 36" & 48" Midsize.
ID: 3/4"
OD: 1-1/4"
THICKNESS: 3/32"

Replaces OEM #: Honda 16212-ZL8-000
Fits Honda engine models GCV135, GCV160

Prefilter replaces Honda 17218-ZG9-800, code 4327391.
For our R8903

Replaces OEM: Honda: 16221-ZH8-801 MTD 951-11569A
Fits Models: Honda GX120, GX160 and GX200
Honda code 4725289
Not compatible with greater than 10% ethanol fuel
Use with our S520-722 Carburetor
Use with our S520-718 Carburetor
Use with our S520-702 Carburetor

Replaces OEM #: Honda 16228-ZL8-000
Fits Honda engine models GCV135, GCV160

Replaces OEM #: Honda 16221-883-800
Fits Honda engine models GCV135, GCV160

Blade bolt replaces Honda 90105-960-710, code 1663665.
Fits 21" mower models HR214, HRA214, HR215, HRA215, HR216, HRA216, HRC215, HRC216, HRM215, HRB215 & HRS21.
Hex flange bolt.
SIZE: M10 X 1.25

Precleaner replaces Honda 17218-ZG9-MOO
For our R7980
HEIGHT:  1/4"
LENGTH:  5-1/2"
WIDTH:  3-1/4"

Replaces OEM #: Honda 16010-883-015
Fits Honda Models: G-15, G-200, G-300 and G-400.

Replaces OEM #: Honda 18381-ZL8-305
Fits Honda engine models GCV135, GCV165

Pre filter for our R7042 and R11505 air filters.

Replaces (OEM): Honda 18381-ZH8-800
Fits Honda Engine Models  GX120 - GX200

Replaces OEM: Honda: 17218-888-003, 17218ZE6505
Pre Filter for our R6684
HEIGHT:  1-7/8"
LENGTH:  7-1/2"
WIDTH:  2-1/2"

Replaces Honda 16221-ZF6-800
Fits models GX340 and GX390

• Honda code 3713161
• Not compatible with greater than 10% ethanol fuel

Prefilter replaces Honda 17218-891-003, code 1067164.                                      
Length: 8-1/2"
Width: 2-1/2"
Height: 2-3/8"

Replaces OEM: Honda 17218-883-901, code 1067131.
For our R6686
BOTTOM DIAMETER:  4-3/8"
HEIGHT:  2-3/8"
TOP DIAMETER:  3-1/8"

Prefilter replaces Honda 17218-ZEO-821, code 2535011.
For our R7044
HEIGHT:  2-1/8"
LENGTH:  4"
WIDTH:  2-7/8"

Replaces OEM #: Honda 16562-ZM0-000
Fits models GCV135, GCV160

REPLACES HONDA #16516-891-000.
BOLT ON.
FITS HONDA GX110/120/140/160.

Prefilter replaces Honda 17218-Z0A-810.
Pre filter for our R10879 air filter.
LENGTH:  8-3/8"
THICKNESS:  3/8"
WIDTH:  4-3/8"

Fits our R2808 Air Filter Combo
HEIGHT:  3-1/8"
LENGTH:  5"
WIDTH:  2-5/8"

Governor spring replaces Honda 16561-ZE3-000. Fits models GX240, GX270, GX340 & GX390

Replaces OEM #: Honda 16562-ZE2-000
Fits models GX240, GX270, GX340, GX390

Replaces Honda 16561-ZE1-810
Fits models GX110, GX120, GX140, GX160

For GX110, 120, 140, 160 (4.5X200) formed ends

Replaces (OEM): Honda 90102-732-010 (bolt) Honda Code 1533355 & 90114-SA0-000 (nut) Honda Code 1410182
LENGTH: 1 29/32 Inches
THREAD SIZE: M6 X 1.0
SHOULDER DIAMETER: 10mm

Replaces Honda 17232-891-000.

Replaces (OEM): Honda 18381-ZE6-820  
Fits Honda Engine Models GXV120, GXV160

7-04007 Napa Oil Seal Replaces Clinton 94-178-990

Foam Pre-Filter replaces Briggs & Stratton 595191
650EXi Series (103M) Model 103M, 104M. 104M02-0003-F1 Engines.

Replaces Honda 16221-ZE3-306

Prefilter replaces Honda 17218-ZE1-821, code 2535029.
For our R6690
HEIGHT:  2-5/8"
LENGTH:  4"
WIDTH:  2-7/8"

Replaces OEM: HONDA: 90325-044-000
Fits Models: HONDA GX110-GX390 and GXV120-GXV390
Used on air filters and air filter housings
Honda code 0127720

Replaces OEM #: Honda 16562-ZE1-020
Fits models GX110, GX120, GX140, GX160

Replaces OEM #: Honda 15600-ZG4-003
Fits Honda Engine Models GX110, GX120, GX140, GX160, GX240, GX270, GX340 & GX390

Replaces OEM: Honda 17211-899-000
Fits engine models GX240, GX270, GX340, GX390, Generator models EB3000, EB4000, EB5000, EB6500, EM3000,
EM3800, EM4000, EM5000, EM6000, EM6500, EMS4000, EMS4500, EW140 and EW17.
Length 6-1/2";
Width 4-1/2";
Height 1-3/8"

Replaces OEM: Honda 17218-ZJ1-840, Hustler 785618
Fits models 610K1, 620K2, 670, GXV610K1 & GXV620K1.
Prefilter for our R10678 air filter.

Replaces (OEM): Honda 18333-ZK6-Y00
Fits Honda GX240, GX340, & GX390 Engines

Fits models GCV135/160. Fits our R9985 recoil starter.

Replaces OEM #: Honda 15600-ZE1-000
Fits Honda Engine Models GX110, 120, 140, 160

Replaces OEM #: Honda 15650-ZMO-801
Fits Honda Engine Models GCV135/160

Replaces (OEM): HONDA 18381-ZH8-800
Fits Models: HONDA GX120, GX140, GX160 and GX200
Honda code 3683745
Fits our OR35-038 Muffler With Shield

Replaces Honda 17211-ZG7-WO3
Fits our R8906

Replaces HONDA 54411-VB3-800
FOR HONDA S/P 21" WALK BEHIND MOWERS.  HONDA CODE #2456069.  
COIL LENGTH:  1-1/4"
DIAMETER:  1/2"
OVERALL LENGTH:  7"
THICKNESS:  3/32"

Filter replaces Honda 17211-896-000.
Fits model G100, 2 & 2.5 hp engines.
Used on Honda pumps. Also fits Mclane & Powertrim edgers.
HEIGHT:  1/2"
LENGTH:  3"
WIDTH:  3-1/2"

Fits 8-13 hp models GX240, GX270, GX340 and GX390.
For our R7712

Starter handle fits Honda models GX110, GX120, GX140 & GX160

Replaces OEM #: HONDA 16955-ZE1-000
Fits models GX 110, 120, 140, 160, 240, 270, 340 & 390.

Prefilter replaces Honda 17218-ZE3-000, code 2577377.
For our R7712
HEIGHT:  3-5/8"
LENGTH:  4-3/8"
WIDTH:  3-1/16"

Replaces (OEM): HONDA 11381-ZH8-801, 11381-ZH8-800
Fits Honda Engine Models GX160 & GX200
Honda code 3683349/4723144

Replaces OEM #: Honda 17620-ZE7-000
Fits Honda Engine GXV120 GXV160 GXV160K1 GXV340K1 GXV340K2 GXV390K.
Fits Honda Mower models HR214SXAHR HRA HRC 215 & 216.

For models GX160, GX240, GX340, GX390

Replaces (OEM): HONDA #16950-ZG9-M02
Fits Models: GCV135, GCV160.
Material: Plastic

Choke lever replaces Honda 16610-ZE1-000.
Fits models GX110, GX120, GX140, GX160, GX240, GX270, GX340, GX390

OLD NEW STOCK GO BY SIZE FITS MANY HONDAS AND JOHN DEERE
KAWASAKI ENGINES
HEIGHT: 3.10 OD: 3.2520 Lip
OD 3.15
ID + THREAD SIZE: .67 x 1.5

Replaces NGK XB05F
Spark Plug Boot 102 Degree.

Replaces OEM: Honda: 16220-ZE1-020, Honda code 2534055
Fits Models: Honda GX110, GX120, GX140, GX160 and GX200

7-04051 Napa Oil Seal Replaces Clinton 94-163

Replaces OEM #: 91202-883-005
Size: 25mm x 41mm x 6mm
Oil seal replaces Honda 91202-883-005.
Front & rear seal. Fits G150-300, GV150-200,
GX120-200. Made of Viton

Starter handle replaces Honda 28461-ZE1-003, code 1428747. For large Honda engines.

Starter handle replaces Honda 28461-ZGO-004, code 4186425. Fits Honda G100. For small Honda engines.

Replaces OEM: Honda 36100-ZE1-015
Fits models GX100, GX120, GX140, GX160, GX240, GX270, GX340, GX390.

Replaces (OEM): HONDA 12391-ZE1-000
Fits HONDA GX160 Series Engine

Replaces Honda 99101-ZK7-0700
Replaces OEM: Honda: 99101-ZH8-0700, 99101-ZH8-0720, 99101-ZH8-0750, 99101-ZK7-0700,
Honda code 5427505, 6056139, 6056147, 8832347
Fits Models: Honda GX160 and GX200

Replaces OEM: HONDA: 17211-ZG9-800, 17218-ZG9-800, 4327391, 4327883
Fits Models: HONDA GXV140, 2000 and older; for 5 HP vertical engines
Width: 2 3/8 "
Length: 5 3/8 "
Height: 1 "
Pre-filter included
Honda code 4327383/4327391

Replaces Honda 30700-ZE1-000, 30700ZE1000
Spark plug boot, fits Honda models GX110, GX120, GX140, GX160, GX240, GX270, GX340, GX390

Replaces OEM #: 91201-890-003
Size: 30mm x 46xx x 8mm
Oil seal replaces Honda 91201-890-003.
Front & rear seal. Fits G300-400, GV400,
GX240-340. Made of Viton

Replaces OEM #: 91201-ZE3-004
Size: 35mm x 52mm x 8mm
Oil seal replaces Honda 91201-ZE3-004.
Front & rear seal. Fits GCV530, GX340-390,
GXV340-530. Made of Viton

Replaces OEM #: Honda 12251-ZE0-000
FITS HONDA MODEL GX110 & GX120 (METAL).

Fits GX160 Series Engines

Replaces OEM: HONDA: 16011-ZE0-005
Fits Models: HONDA GX100, GX120, GX160, GX200, GXV120, GXV140 and GXV160
Honda code 1441476
Not compatible with greater than 10% ethanol fuel

Replaces Honda 16011-ZEO-005
Fits models GX110, 120, 140, 160. Inlet needle only.

Replaces (OEM): Honda 12251-ZE7-000
Fits Honda GXV160 5.5 HP Engines

Replaces Honda 16011-ZA0-931
Fits models GX240, GX270, GX340 & GX390. Inlet needle only.

Wheel bearing replaces Honda 96150-60020-10, code 0876904.
Fits 21" commercial mowers.
Sealed 2 sides.
Bearing No. 6002-RS, 6002rs
HEIGHT: 23/64"
ID: 37/64"
OD: 1-1/4"

Replaces (OEM): HONDA 06720-V10-030 Honda Code 6813166
Fits HS520 snowblowers.
Spiral Height: 11-5/8"
Spiral Width: 4-3/8"
Spiral Hole Diameter: 15/32"

Replaces OEM#: HONDA
Fits Models:HONDA GCV135, GCV160.
can be used with our R9985 Honda 28400-ZMO-003 Starter Recoil Assembly

Replaces Honda OEM Part Numbers: 76153-736-010, 76153-736-000
Honda code 1878628
Fits models HS55, HS55K1, HS55K2, HS70, HS80, HS80K1, HS50

Replaces OEM#: HONDA 28442-ZE6-003
Fits Honda Models GX110, GX140, GX160 Multi Fit Starter, Single Ratchet (before 1995)

Replaces OEM#:HONDA 28442-ZE1-713 & 28442-ZE1-711
Fits Honda models GX240, GX340 Multi Fit Starter. Single Ratchet (before 1995).

Replaces Honda 17910-VA4-800, code 1663483
Fits 21" mowers.
CONDUIT LENGTH:  48-3/4"
INNER WIRE LENGTH:  52"
WIRE TRAVEL:  3"

Replaces HONDA: 17211-ZG9-M00
KOHLER: 1408301S, 1408304S
MTD: 751-10298, 951-10298
Fits Models
Fits Honda SX Series, Harmony 215 Model HRM215.
HUSKEE: 11A-B2J1731, 11A-B22J731, 5P70MU, 5X65RU
YARDMAN: 11A-A12N701, 11A-A22J701, 11A-B02J701, 11A-B22J701,
11A-B22N701, 12A-B22N701, 12AKD32N701, 12AVB22J701, 5P71MU, 5X65RU

Replaces (OEM): Honda 12251-ZF6-W00
Fits Honda GX390 13 HP Engines

Replaces Honda 16011-ZEO-005
Fits Honda GX110, GX120, GX140, GX160 series engines

Discontinued New-Old Stock

Replaces OEM: HONDA: 17672-880-000
Fits Models: HONDA GX110, GX120, GX140, GX160, GX200, GX240, GX270, GX340 and GX390
Honda code 0474759
Not compatible with greater than 10% ethanol fuel

Replaces OEM#: HONDA 28444-ZE2-W01
Fits Honda enginie series GX240, GX270, GX340, GX390.

Replaces OEM#: HONDA 28434-ZE1-711
Fits Honda engine series GX340 and GX390.
Fits our R9998 Starter Recoil Assembly Replacing Honda 28400-ZE8-8113A

Replaces OEM#: HONDA 28442-896-700 Honda Code #093310
Fits Honda HRC 216, HR17, PDAM Walk Behind Mowers

Replaces OEM#: HONDA 28447-878-810 Honda Code #044186
Fits Honda F400AZ Tillers

Fuel cap replaces Honda 17620-ZH7-013 code 3682028.
Fits 4-8 hp engines.
Plastic cap.