Replaces OEM: BOBCAT: 64163-22
BUNTON: PJH1054
FERRIS: 1541476, 5041476
Fits Models: BOBCAT, BUNTON & SCAG Pneumatic front caster assembly 32", 36" and48" decks
Height: 1/2 "
ID: 1 "
OD: 1 11/16 "

Replaces Bobcat 38025N.
Used on our R905 wheel assembly.
Also in our R8664 wheel bearing kit.
ID: 7/8"
OD: 1-1/2"

Retainer bushing only for Bobcat.
Used on our Bobcat R3239 wheel assembly.
OD 1-1/2" (38.10 mm), ID 5/8" (15.87 mm).
Size: ID 5/8", OD 1-1/2"

Replaces; BOBCAT/RANSOM 48053-2A, SNAPPER/KEES 2-3556, 7023556, 7023556YP
Used on Bobcat support arm 46102C.
Used on our R8181 & R6580 support arm.
Fits Snapper 23556, Pro 7.
Also fits Ferris 20822.
FLANGE OD: 1-5/8"
HEIGHT: 3/4"
ID: 1"
OD: 1-1/4"
BRONZE

Used on our Bobcat R3239 wheel assembly.
OD 1-21/64" (33.73 mm), ID 21/32" (16.66 mm), Length 1-7/16" (36.51 mm).

Replaces Bobcat 33050
Used on our caster yoke support arm R2218.
HEIGHT: 1-3/16"
ID: 3/4"
OD: 1"

Open cage roller bearing with flanged bushings for our Bobcat Wheel Assembly R3239.
Bearing 38069N, Cap 38042N.
Size: ID 5/8", OD 1-13/32", Length 2-7/32"

Replaces OEM: Bobcat: 38046N, Bunton: PL0678, Exmark: 1-303051, Jacobsen: 552234,
John Deere: AM122119, Kees: 363181, Lesco: 021870, Bearing Ref No: 6202-2RS,
Scag: 48224, Snapper: 1-4514, 7-7324, 7014514, 7014514YP,
Fits Models:
Bobcat Variable speed units
Jacobsen Crew King
John Deere Units with variable speed transmissions
Snapper tractors, pro gear drive loop handle series 0, 1, 2, 4; 36" V
and 48" pro deck attachment series 0, 2, 4; pro gear drive pistol grip series 1, 2, 4 for disc drive
Specs:
ID: .625"
OD: 1.375"
Height: .430"
Double seal

Replaces BOBCAT/RANSOM 38273, 38274
SCAG 48006-06, 48006-07, 481769, 481770
SNAPPER/KEES 22394, 22395, 7022394, 7022394YP, 7022395, 7022395YP
OPEN CAGE ROLLER BEARING IS 5/8" ID (15.86MM) X 1-3/8" OD (34.93MM), 3-1/4" LENGTH (82.55MM).
BUSHINGS ARE 5/8" ID (15.86MM) X 1-3/8" OD (34.93 MM).

Replaces BEARING RA100RR
BOBCAT/RANSOM 38348-01
BUNTON-GOODALL PL7323
CUB CADET 455102-R21, 586609-R92, 60069-C91, 60071-C91, IH-60071-C91, IH60071C92
DIXIE CHOPPER 30218
DIXON 539115279
DIXON INDUSTRIES 1701, 539102677, 539115279
EXMARK 1-513016
GRASSHOPPER 120081
HUSTLER 077123, 784223
JOHN DEERE 8597, JD8597
WALKER 5270
WOODS/HESSTON 60006, 70006
YAZOO 102677
Fits spindle assembly on 30", 42", 50" cut Zero Turn.
Also fits wheel hubs on Dixon Zero Turn with chain drive.
HEIGHT: 27/32"
ID: 1"
OD: 2"

Replaces; BOBCAT/RANSOM 2306019, 31005A
Variable speed. (90 degree)

Replaces: BOBCAT/RANSOM 35008N
BUNTON-GOODALL PL4611, PLO609
EXMARK 1-303057, 1-303543, 303543
FERRIS 46363-5
HUSTLER 783555
JOHN DEERE 9467
SCAG 483303
SNAPPER/KEES 1-9125, 7-6510, 7019125, 7019125YP
Bearing No. 6305-2RS, 6305DU
HEIGHT: 21/32"
ID: 25 mm
OD: 2-7/16"

Replaces Bobcat 38058N (roller cage bearing) & 38025N (retainers).
Fits our R905 Bobcat 38096C wheel assembly.
HEIGHT: 6-7/16"
ID: 7/8"
OD: 1-3/8"

Replaces: BOBCAT/RANSOM 38213, ENCORE 363292, TORO/WHEEL HORSE 51-4270.
Fits midsize models with peerless transmissions, two 9/32" mounting holes, 2-1/2" center to center.
HEIGHT: 3/4"
ID: 5/8"
OD: 2-1/2"

Repl. wheel bearing kit for our Bobcat, Grasshopper & Scag wheel assembly 8-3276. Comes with (2) 9-481 high speed 5/8" (15.88 mm) bearings, (2) 10-7779 21/32" (16.67 mm) x 1-1/8" (28.58 mm) washer and (1) 9-7262 5/8" OD (15.88 mm) x 4-1/16" (103.19 mm) bushing.

Bobcat/Ransomes 35062B, Exmark 1-303067, 303067
Output Shaft Support Bracket Bearing.
Used with our R8184 Flange.
HEIGHT: 7/8"
ID: 5/8"
OD: 1-9/16"
THICKNESS: 0.3543"