* This part replaces: 912-0318, BN-Z32010, BS-690662, BS-94877

* This part replaces: 738-0968

REPLACES MURRAY 55272, PLP 192-304, PRIME LINE 7-04243, SILVER STREAK 85-006, STENS 285-460.
KEYWAY:  5/32"
LENGTH:  6"
OD:  5/8"
THREAD SIZE:  1/2"-20

Replaces OEM: Murray 092849MA
Fits 38" - 42" Decks
LENGTH:  7.92"

Splined shaft replaces Murray 774091 & 94129.
Fits Murray & Scotts 42" and 46" front engine riders. Uses our R8901 nut.
LENGTH:  7"
OD:  5/8"

Spindle Repair Kit for our R2925
Murray spindle assembly fits 1983 and newer models.
Comes with (1) R8831 5/8" x 1-3/8" OD bearing, (1) R8861 5/8" x 1-9/16" OD bearing, (1) R2892 7/8" OD x 1-11/16" bushing, (1) 1/2 x 20 nut.

Spindle repair kit for Murray spindle assembly used on 1982 & older models.
Comes with (2) R1265 5/8" bearings, (1) R2892 7/8" OD x 1-11/16" bushing, (1) 1/2 x 20 nut.
Used with our R7765 quill assembly

Replaces MTD, Cub Cadet, Troy Bilt 738-1186A
Fits our R14328, R12967 & R15520 Spindle Assemblies.
6.11" long.

REPLACES MURRAY 24578, PLP 192-303, PRIME LINE 7-04288, SILVER STREAK 85-005, STENS 285-452, SUNBELT B1SB2937.
KEYWAY:  5/32" (2)
LENGTH:  5-3/4"
OD:  5/8"

Replaces OEM: AYP: 192872
Fits Models: AYP 46", 48" and 54" decks
Length: 7 1/2 "
Blade mount is 5 pt. star shaped

Replaces MTD 738-0933
Shaft only for our R9287 Spindle Assembly replacing MTD 918-0431C
LENGTH: 6"

174358, 532174358 Genuine AYP Spindle Housing for 48" Decks Built after 2001

SHAFT-BLADE SPINDLE STAR 6.1

Replaces (OEM): AYP 137553
HUSQVARNA 532 13 75-53
FITS AYP 44", 46" & 50" DECKS WITH STAR CENTER HOLE
Height: 4 7/8" OVERALL
Used with our R9521 Housing.
Includes our R442 Bearing.
Double hex external spline for pulley.
For top bearing use our R8507

Size: 3/4-16 x 7.16
BOLT-HEX HD BLADE

Replaces OEM #: MURRAY 1001194, 1001194MA, 1001046, 1001200 1001200MA
Fits 2001 Models and up Riding Mowers. Includes Shaft with Grease Zerk.
Uses our R8901 nutOD 6-7/8"
Height 7-1/4"
Can use with our R10820 Pulley

Replaces Exmark: 1-413330, 413330,
Fits Models: Exmark: Lazer Z HP and Turf Tracer HP with 44", 48" and 52" decks; Metro HP and Metro five speed
Specs:
OD: 1"
Length: 7 3/16"
Thread: 5/8"-18
1 3/16" bottom OD
Shaft only

Replaces OEM: TORO: 103119, 10-3119
Bearing No.: 1630-2RS
BEARING OD: 1-1/2"
OVERALL LENGTH: 4-1/2"
SHAFT OD: 3/4"

Replaces (OEM): AYP 136819,532136819, 532106037,121622X, 136818, 105483X, 106037X FITS AYP/ROPER/SEARS 44" CUT GARDEN TRACTOR, SECONDARY, CENTER & LEFT SIDE. FITS MODELS: GT2500BR, GT2500CR, RL1844B, PC1844A. ALSO FITS 20 HP 50" CUT MODELS: 4200-14 & 951940.

Replaces OEM: Cub Cadet, Troy Bilt, MTD: 618-0660, 618-0660A, 618-0660B, 918-0625B, 918-0660, 918-0660A, 918-0660B
Fits Models: Cub Cadet LT1045 (2008 and After), LT1046 and i1046 with 46" decks using special design for 6 point star center hole blades
OD: 4 "
Height: 6 1/2 " OVERALL
Includes nut spacer and grease zerk
DOES NOT INCLUDE PULLEY

* This part replaces: 618-04137, 618-04137A, 618-0625,
618-0625A, 618-0625B, 618-0660, 618-0660A, 618-0660B,
918-04137, 918-04137A, 918-0660, 918-0660A, 918-0660B
Pulley Diameter: 5.5''
Height: 6.375"
6 point star design

Replaces OEM#: NOMA 307534, 327519, 39493, 50632, 51450, 56424, 779066
Height:6 5/8"
2" blade saddle
Serviceable
Right side spindle

Replaces OEM#: JOHN DEERE AM108925  
FITS 38" DECK ON LX AND GT SERIES.

**Please be sure to double check your John Deere Part number before ordering these spindles. Some of the models listed above use a 3 bolt spindle, and this is a 4 bolt spindle.

Replaces John Deere AM124511
Fits 38" decks on STX38

Replaces Toro Wheel Horse 80-4341
Includes 88-4510 housing with bearings, 80-4341 shaft, 80-4380 spacer.
Fits Time Cutter Z. Models 71180-71428 & 74301-74403.
LONG SHAFT.

* This part replaces: 618-0268, 618-0268A, 618-0428,
618-0428A, 618-0428B, 918-0268, 918-0428, 918-0428A

Replaces OEM: CUB CADET 618-0595, 618-0595A,
618-0595B, 918-0595A, 918-0595B, 918-0593A, 918-0595
Fits later model 46" deck - 800 series.
Double pulley.
Fits star hole blades.

Replaces Dixie Chopper 30217-L.
LENGTH: 9-1/2"
OD: 1"
Spindle Shaft for Dixie Chopper: 10161L, 300442 Spindle

Replaces MTD 618-0269, 618-0429, 618-0429, 918-0269, 918-0429, 918-0429A
MTD Spindle Assembly with Double Pulley and Fittings.
5-1/2" & 5" Diameter.
Length: 5.275",
Pulley end: 5/8"-18 Splined,
Blade end: 5/8"-18 Star.
Years Used: '98 to Current.
Used on Tractors with 50" Decks.