OREGON OR-B050 HARVESTER SPROCKET SHIM .5M

OREGON 37986  NEOPRENE SPROCKET SEAL

Fits Dolmar PS6000i, PS6800i, Makita: DCS6000i, DCS6800i

Size: 4 1/4 fl. oz. tube
Multi-purpose grease for chain saw sprockets, string trimmers,
gear boxes and equipment which recommend an EP-O Grease.

OREGON OR-B100 HARVESTER SPROCKET SHIM 1.0M

OREGON OR-C100 HARVESTER SPROCKET SHIM 1.0M

OREGON OR-C050 HARVESTER SPROCKET SHIM .5M

HERR N046-M6
TEETH: 6
PITCH: 3/8" LP

HERR: 264-M3
TEETH: 6
PITCH: 3/8" LP

Replaces Husqvarna 537291702.
Fits 455 & 460 Models.

Fits Allis Chalmers Models: 75, 75A, 95
Fits Dayton (W.W. Grainger) Models: 2Z573, 4Z970
Fits Husqvarna Models: Husky Jr. 121
Fits Poulan Models: 25, 25A, 25DA, Countervibe, S-25
Fits Wright (Poulan) Models: 121, 122A
Fits Sears Craftsman Models: 35095, 35096, 35211, 35215, 35119, 35231, 35232, 35235, 35238, 35255, 35256, Explorer I, II.
Drum ID: 2.7"
Drum Depth: .470"
Bushing ID: .430" or 11mm.  Bushing Installed.
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: B225-M6

Fits Echo Auto models CS-400, CS-440, CS-3900
Pitch: .325"
No. of Teeth: 7
Herr Mfgr. No.: EC206J7N

Fits Poulan Models: 1800, 2000, 2300, (Models w/ needle bearing)
Pitch: 3/8 L/P
No. of Teeth: 6
Herr Mfgr. No.: B224-M6

Fits Husqvarna Models 40, 45
Fits Jonsered Models 2041, 2045, 2050
Pitch: .325
No. of Teeth: 7
Herr Mfgr. No.: N265-L7

Fits Stihl Models 017, 021, 023, 025
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: 084-M6

Fits Stihl Models 029, 034, 036, 039
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: 193-A7

Fits Stihl Models 024, 026, (Before No. X25809074)
Pitch: .325"
No. of Teeth: 7
Herr Mfgr. No.: 191-L7

Fits Danarm Models 1-35, 1-36SS
Fits Frontier Models Mark l, Mark ll VIP, F35, FB35
Fits Homelite Models 110 (Electric)
Fits Husqvarna Models 33, 34, 35, 37, 38
Fits Jobu Models SL-2, SL-21
Fits Jonsered Models 36, 361, 365, 370
Fits Lombard Models: Pony
Fits Partner Models 22, 330, 350, 1612, 1613, 1614, 1616
Fits Pioneer Models P10, P12
Skil (PM-Canadien) Models 310, 944, 1600, 1601, 1602, 1610, 1611, 1612, (Electric) 1613, 1614, 1616, 1700, 1705, 1712
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: N217-M6

Fits Husqvarna Models: 36, 41
Fits Jonsered  Models: 2036, 2040
Fits Partner Models: 365, 405
Fits Poulan Models: 255, 295, 2500, 2600, 2750
Pitch: .325
No. of Teeth: 7
Herr Mfgr. No.: 266-L7
Drum ID: 2.5"
Shaft Size: .3937 or 10mm
Durm Depth: 1/2".

Drum ID: 2-1/2",
Drum Depth: .577",
Bearing ID: .3937 or 10mm, Bearing Installed.
Pitch: 3/8 L/P
No. of Teeth: 6
Herr Mfgr. No.: 266-M6

Fits Alpina-Castor Models: A-40-AY, 41, 45
Fits Husqvarna Models: 50, 51, 55, 154, 254, 262
Fits Jobu Models: 949, 949S, LF50, LF50B
Fits Jonsered Models: 36, 361, 365, 370
Fits Partner Models: Homeowner 400, 500, 5000, P48, P49
Fits Poulan Models: 325
Pitch: .325
No. of Teeth: 7
Herr Mfgr. No.: N110-L7
Needle bearing included.
Drum ID: 2.7"
Drum Depth: 1/2"
Hole Size: 5/8"
Bearing ID: 1/2".

Fits Husqvarna Models 340, 345, 350, 351, 346XP
Fits Jonsered Models 2150, 2250
Pitch: .325"
No. of Teeth: 7
Herr Mfgr. No.: HU414-J7N

Replaces OEM: Echo: 17500539132
GB: EC202-R6N
Herr: 359-M6
Oregon: 106906X
Ref No: SEC202-16N

Fits Models: Echo CS300,CS305, CS306, CS330T, CS340,
CS341, CS345, CS346, CS3000, CS3350, CS3400, CS3450 and CS3500

Specs:
Crank Diameter: 10 mm
Drum ID: 2.366 "
Pitch: 3/8" LP
Teeth: 6
Bearing included

Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: 183-A7

Fits Poulan Pro Models 230, 260, 2050, 2075, 2150, 2175, 2250, 2550
Fits Sears Craftsman Models 351062, 351142, 351161, 351181, 352161, 352180
Pitch: 3/8" LP
No. of Teeth: 6
Herr Mfgr. No.: PO532-R6N

Fits Echo Auto models CS-3000, CS-3400, CS-3450
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: 359-M6

Fits McCulloch Models: Mini-Mac, Mini-Mac 6, 25, 30, 35 Mac 6, 110-140, 3214, 3216, 3516, 3818,
PowerMac 310-340, 365, 480, ProMac 3205, 3805, Super Pro 40, Titan 7, Titan 35, Titan 40
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: N174-M6

Stihl Auto models 09, 010, 011
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: 081-M6

Fits Homelite Auto models 190, XL Mini, SXL Mini AO, XL101, XL, XL2, XEL, Super 2, Vl Super 2, Super 2CC, (2-3/8" clutch & 3/8 shaft)
Pitch: 3/8 LP
No. of Teeth: 6
Herr Mfgr. No.: N158-M6

Fits Husqvarna Models 61 (after S/N 0510572), 266, (after S/N 051...), 268 (after S/N 051...), 272 (After No. 051.)
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N304-A7

Stihl Auto models 028 (After No. X25809074)
Pitch: .325
No. of Teeth: 7
Herr Mfgr. No.: 190-L7

NO. OF TEETH: 7
PITCH: 0.3250"

Fits Homelite Model 240 and 245
NO. OF TEETH: 6
PITCH: 3/8" LP

Replaces Stihl 1121-007-1037, 1121-640-2004
Fits Stihl Models: 024, 026, MS260, MS270, MS280, MS281.  
PITCH: .325"
TEETH: 7

852-257 Chainsaw sprocket
Silver Streak Spur Sprocket
.325" PITCH, 7 TEETH

R1644 - Chain Saw Open Spur Sprocket for Homelite Auto models XL-12, (Before Serial 1735838) XL15, XL400, XL500, XL600, XL700, C-52 (small hole)
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N147-A7

Fits Echo Auto models CS-602, CS-702, CS-750
Pitch: 3/8"
No. of Teeth: 7
Herr Mfgr. No.: 50140

Fits Homelite Auto models XL-12, (After Serial 1735838) XLAuto, SXL, Auto, 450, 450W, 450W, 450HG, 450SL,
550, XL800, XL850, XL870, XL875, XL901, XL903, XL904, XL913, XL914, XL922, XL924, Vl944, Vl955, SXL925, Large hle
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N148-A7

Fits Husqvarna Models Practica 61, Rancher 61, 66, 162, 266, 268, 272.
Fits Jonsered 625, 630, 630 Super, 630 West Coast, 670.
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N304-11

Fits McCulloch Models: PRO MAC 55, 60, 155, 165, 355, 375, 515, 610, 650, 655, 700, 805, 850, SP-60, CP-70, SP-70, Mac 1-10 Thru 10-10
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N176-A7

Fits Echo Models CS-451, CS-452, CS-500, CS-510, CS-550, CS-610, CS-650, CS-660
Fits John Deere Models 50V, 55V, 65EV
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: 355-A7

Fits Poulan Models: 285, 305, 335, 336, 365, 2800, 2900, 3000, 3300
Pitch: .325
No. of Teeth: 7
Herr Mfgr. No.: N231-L7
Drum ID: 2.7"'
Hole ID: 5/8"
Shaft Size: 1/2"
Drum Depth: .600"

replaces Husqvarna 503980071, 503980002
Fits Husqvarna Models 340, 345, 346XP, 350, 351 & 353,
Fits Jonsered Models 2141, 2145, 2149, 2150, 2151, 2152, 2159, 2245 & 2250.
PITCH:  0.3250"
TEETH:  7

Fits Echo Auto models CS-4000, CS-4500, CS-4600, CS-5000, CS-5500
Pitch: .404"
No. of Teeth: 7
Herr Mfgr. No.: 50010

Replaces OEM: CARLTON: N6-HO-001-SS
GB: HO100-R6N
HERR: N158M6
Homelite: A 95653 B, A 95653 C, A 95653 D, A 95653 E, A95650B
Fits Models: Homelite 190, 375XEL, XL, XL MINI, XL2, XL101, SUPER 2, SUPER 2 CC,VI SUPER 2, 5240, 200, 180, 192 AND SLX MINI AO (WITH 2 3/8" CLUTCH, 3/8" SHAFT), LITTLE RED
Crank Diameter: 3/8 "
Drum ID: 2.440 "
Pitch: 3/8" LP
Teeth: 6
Bearing included

Replaces OEM:
Carlton: A7-HO-311-SS
GB: HO113-A7N
Herr: N148A7
Homelite: A 95459
Oregon Ref.: 30681X
Ref No: SHO113-37N
Fits Models:
Homelite: XL12 (after serial #1735838) SUPER XL, XLAO, XL400, XL500, XL800, SXL925, VI944, VI955, 450, 550 and 923
Specs:
Crank Diameter: .625"
Pitch: 3/8"
Teeth: 7
Packaging Type: Branded box
Bearing included

Fits Western Auto models A-18 and 3400
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: N230-11

Fits Stihl Auto models 030AV, 031AV, 031AVE, 032AV, 040, 041, 041AV, 041AVE, (after # 5664891)
Pitch: 3/8
No. of Teeth: 7
Herr Mfgr. No.: 183-11

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
SPROCKET WASHER: 37246 (washers do not come with sprocket but are available separately)
Fits Stihl 024, 026 (after S/N X25809074)MS 260, MS 270
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Stihl 1123-640-2000
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Stihl 017, 018, 019, 021, 023, 025, MS 210, MS 250
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8" (91)
TEETH: 6
Fits Olympyk 935
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Olympyk 931
Fits Redmax G300T, G300TS, G3100TS, G300AV/AVS
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Olympyk 938, 941, 942, 945, 946, 951
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 952-048124
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325
Fits Poulan 210, 221, 230, 260, 2050, 2055, 2075, 2150, 2155, 2175, 2250, 2450, 2550, Patriot 1900, Woodshark.
Fits Sears 351062, 351142, 351161, 351181, 352161, 352180.
Fits Snapper 1634, 1838.
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Husqvarna 36, 41, 136, 141
Fits Jonsered 2036, 2040
Fits Poulan 255, 295, 2500, 2600, 2750, 2775, 2900, 3050, P600
Fits Partner 365, 405
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Stihl 1123-007-1003
SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Stihl 017, 018, 019, 021, 023, 025, MS 210, MS250
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .375"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits Jonsered 410, 420, 425, 435, 2041, 2045, 2050
Fits Husqvarna 40, 45, 49
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37511 (bearing does not come with sprocket but is available separately)
Fits Echo 3000, 3400, 3450, CS-301, C-330T, CS-360T
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 530048083
SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits Olympyk 931
Fits Poulan 285, 305, 335, 336, 2700, 2800, 3000, 3300, 3350, 3700
Fits Sears 251200
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Homelite A57344
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325
Fits Homelite 20, 23, 27, PS-33, 2500, 2700, 3300, 3350, 3800, 3850, Ranger, UT10901, UT10926
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37511 (bearing does not come with sprocket but is available separately)
Fits Solo 639, 644, 651, 651SP
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 22152
Fits Dolmar PS-34
Fits Makita DCS-34
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 21940
Fits Dolmar PS-340, PS-341
Fits Makita: DCS-340, DCS-341
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Homelite A95653B
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 28034
Fits Homelite 190, Little Red, Super 2, Super 2cc, VI Super 2, XEL, XL, XL2, XL Mini
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Echo 175005-13931
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 22152
Fits Echo CS-280, CS-290, CS-300
Fits John Deere 25EV
Fits Redmax G300T, G300TS, G3100TS, G300AV/AVS
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Echo 175005-11530
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 22152
Fits Echo CS-302, CS-315, CS-330, EVL, CS-351
Fits John Deere 28, 30, 35, 35EV, 40V
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Husqvarna 507-1005-51, Jonsered 100551
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 21940
Fits Frontier F-35, FB-35
Fits Husqvarna 33, 34, 35, 37, 38
Fits Jonsered 36, 361, 365, 370
Fits Partner 22, 330, 350, 1612, 1613, 1614, 1616, Mini P, P2, P3, PA
Fits Pioneer P-12
Fits Skil 310, 944, 1600, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 1700, 1705, 1712
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 952-048078
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 35184
Fits Dayton 4Z022, 4Z023, 4Z109
Fits Poulan/Poulan Pro 180, 205, 225, 235, 1800, 2000, 2100, 2300, 2400, Micro 25
Fits Sears 35093, 35094, 35202, 35203, 35205,
Fits Skil 1620, 1622, 1624, 1634
Fits Western Auto 012, 014, 110, 112, 214, 1800, 2000, 4010, S25DA
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 28033
Fits Remington Job Master, Mghty Mite 100-800, Outdoorsman, Yardmaster
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Poulan 952-048102
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 28031
Fits fits Allis Chalmers 75
Fits Dayton 2Z970, 4Z573
Fits Poulan/Poulan Pro 25 Series (except Micro 25), S25
Fits Sears 35235, 35238, 35255, 35256
fits Skil 1635, 1636
Fits Western Auto Wizard Models 316, AV16
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Stihl 1129-640-2000, 1120-640-52000
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Stihl 009, 010, 011, 020T, MS 200T
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces McCulloch 215252
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325
Fits McCulloch 365, 2000, 2010, 2012, 2014, 2016, 2116, 2316, 2318, 3000, 3200, 3210, 3214, 3216, 3505, 3516, 3805, 3818, mac 110-140, Mini Mac, MS1432, MS1435, MS1838, PM480, Power Mac 310-340, Pro Mac 3205av-14, Titan 35-40
Fits Montgomery Ward TMY24062, TMY24064, TMY24066, TMY24068
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Homelite A95620
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 11807 (bearing does not come with sprocket but is available separately)
Fits Homelite 450, 550, Super XL 925 (with 6-shoe clutch), Super XL Auto, VI 944, VI 955, XL (800-924 Series), XL-12 (after S/N 1735838, XL Auto.
Fits Remington PL-4, PL-5, PL-55, SL-11, Logger, Woodsman
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Husqvarna 501-5140-01, Jonsered 50183-1601
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 11999
SPROCKET DUST COVER: 32204 (dust cover does not come with sprocket but is available separately)
Fits Husqvarna 61 (after S/N 0510572), 266 (AFTER s/n 0510000), 268 (after S/N 0510000), 272 (after S/N 0510000)
Fits Jonsered 625 (after S/N 0510123), 630 (after S/N 0510000), 630 Super (after S/N 0510000), 630 West Coast (after S/N 0510000), 670 (after S/N 0510153)
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Husqvarna 501-2559-01
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET NEOPRENE SEAL: 37986 (seal does not come with sprocket but is available separately)
Fits Husqvarna 77, 160, 163, 180, 260, 263, 280, 380, 480, L-65
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 31153 (bearing does not come with sprocket but is available separately)
SPROCKET DUST COVER: 38226 (dust cover does not come with sprocket but is available separately)
Fits Stihl 030, 031, 032, 041 (after S/N 5664891), MS 310
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Stihl 1119-642-2000
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 37514 (bearing does not come with sprocket but is available separately)
SPROCKET DUST COVER: 35679 (dust cover does not come with sprocket but is available separately)
Fits Stihl 038, 038 Super Magnum
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Stihl 1115-640-2001
SPROCKET PITCH: 3/8"
TEETH: 7
Fits 045, 056S (before S/N 10963560)
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Husqvarna 501-6741-01, Jonsered 50183-1501
SPROCKET PITCH: 3/8"
TEETH: 8
SPROCKET BEARING: 11999
Fits Husqvarna 61 (after S/N 0510572), 266 (after S/N 0510000), 268 (after S/N 0510000), 272 (after S/N 0510000)
Fits Jonsered 625 (after S/N 0510123, 630 (after S/N 0510000), 630 Super (after S/N 0510000), 630 West Coast (after S/N 0510000), 670 (after S/N 0510153)
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces McCulloch 65370
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits McCulloch 60, 155, 165, 355, 3658, 375, 515, 605, 610, 650, 655, 700, 805, 850, 855, Mac 1-10 through 10-10, Pro Mac 55, SP-70, TIMBER BEAR
Fits Montgomery Ward TMY24084, TMY24086
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Echo 175005-14330
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 37507 (bearing does not come with sprocket but is available separately)
Fits Echo CS-451, CS-452, CS-500, CS-510, CS-550, CS-610
Fits John Deere 50V, 55EV, 55V
Fits Redmax G-561, G-621
Fits Sears 35826, 35829
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits Husqvarna  50, 51, 55, 154, 254 (before S/N 345-0001), 262
Fits Jonsered 490, 590
Fits Partner P400, P500, P5000, P5100
Fits Poulan/Poulan Pro 325
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Stihl 1128-640-2000
SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET BEARING: 37504 (bearing does not come with sprocket but is available separately)
Fits Stihl 044, 046, MS361, MS362, MS440, MS460
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Poulan 952-048115
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Husqvarna 36, 41, 235E, 240E
Fits Jonsered 2036, 2040
Fits Partner 365, 405
Fits Poulan/Poulan Pro 255, 295, 2500, 2600, 2775
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325 (bearing does not come with sprocket but is available separately)
Fits Husqvarna 36, 41, 136, 141
Fits Jonsered 2036, 2040, 2041
Fits Partner 365, 405
Fits Poulan/Poulan Pro 255, 2695, 2500, 2600, 2750, 2775, 2900, 3050, P600
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

Replaces Echo 175105-14630
SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37509
Fits Echo CS-400, CS-440, CS-510, CS-3600, CS-3900, CS-4400, CS-5100 (after S/N 134504)
Fits John Deere 45
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 37325
Fits Husqvarna 141, 142
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 37877
Fits Husqvarna 141, 142
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: .325"
TEETH: 7
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users

SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 11893 (bearing does not come with sprocket but is available separately)
Fits Husqvarna 455, 460
-Rugged and dependable, with excellent wear resistance.
-Available to fit professional-type chains in .325, 3/8" and .404" pitch.
-Five configurations that work on many of the saw models preferred by commercial and professional chain saw users.

SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 108817
Fits Poulan 3416, 3816, 4018, 4218
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Husqvarna 503-8227-01
SPROCKET PITCH: 3/8" (91)
TEETH: 6
SPROCKET BEARING: 21940 (bearing does not come with sprocket but is available separately)
Fits Husqvarna 334, 335, 336, 338, 339
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

Replaces Homelite PA01650A
SPROCKET PITCH: .325"
TEETH: 7
SPROCKET BEARING: 108817
Fits Homelite Timberman
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 1/4"
TEETH: 8
SPROCKET BEARING: 22152
Fits Echo CS-280, CS-290, CS-300EVL
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 1/4"
TEETH: 8
SPROCKET BEARING: 22152
Fits Echo CS-302, CS-315, CS-330EVL, CS-351, CS-360
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 1/4"
TEETH: 8
Fits Echo CS-300, CS-301, CS-305, CS-340, CS-341, CS-345, CS-346, CS-3000, CS-3350, CS-3400, CS-3450
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 1/4"
TEETH: 8
Fits Husqvarna 33, 34, 358, 37, 38
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 1/4"
TEETH: 8
Fits Husqvarna 36, 41, 136, 141
Fits Poulan P600
For today's electric and smaller gasoline-powered chainsaws.
-Available for use with .325" pitch chains or with 3/8" low profile chains (90SG, 90S, 91VG, 91VX, 91VXL)
-1/4" pitch chains: 25A, 25AP

SPROCKET PITCH: 3/8"
TEETH: 7
SPROCKET RIM: 18720
SPROCKET BEARING: 11893
SPLINE: SM7 (Small 7 Spline)
Fits Husqvarna 455, 455 Rancher, 460, 460 Rancher
The Power Mate Rim Sprocket System is the most effective way to drive saw chain on most chainsaws.
The Power Mate Rim Sprocket System includes a clutch cup with spline and a replaceable rim sprocket.
The rim floats freely on the spline, maximizing the saw chain-bar groove alignment.
The rim is designed to be replaced, maximizing operational life and reducing overall operating costs.
Note: All rim sprockets have two sets of teeth.