You are here: Home > Parts by Manufacturer > Exmark Replacement Parts
We found 325 results matching your criteria.
Choose a sub category:
Belts
Blades
Drive Parts
Electric PTO Clutches
Fuel Related Parts
Grass Bags
Hydro Gears Hydro Pumps
Ignition Parts
Oil, Transmission & Hydro Filters
Pulleys
Spindle Assemblies
Wheel & Deck Parts
Sort By:
Page of 4
R12564 - 3/8"-24 x 2 Axle Screw Replaces Exmark 3211-46 R12564 - 3/8"-24 x 2 Axle Screw Replaces Exmark 3211-46

Replaces EXMARK 3211-46
Used in our R12016 & R12018 deck wheel kits.
Grade 8
WHEEL BOLT HCS 3/8-24 X 2 YZ8

Our Price: $0.99
This item must be picked up in our store.
R8447 WHEEL BOLT NUT FOR TORO/ EXMARK R8447 WHEEL BOLT NUT FOR TORO/ EXMARK

REPL TORO 32153-5
REPL EXMARK 804509
Fits our wheel bolt R8411 & R8419

Our Price: $1.50
This item must be picked up in our store.
R10064 - Front Wheel Spacer Replaces Exmark 1-633581 R10064 - Front Wheel Bearing Spacer Replaces Exmark 1-633581

Replaces EXMARK 1-633581, SCAG 43584
Fits Lazer Z units.
Fits our R9803, R9804, R9809 wheels.
Spacer for front wheel, bearing & seal.
ID: 3/4"
OD: 1-1/8"
WIDTH: 5/8"

Our Price: $1.50
This item must be picked up in our store.
R12565 - 3/8-16 Axle Nut Replaces Exmark 3296-39 R12565 - 3/8-16 Axle Nut Replaces Exmark 3296-39

Replaces EXMARK 3296-39
3/8"-16, used in our R12016 & R12018 deck wheel kits.

Our Price: $1.50
This item must be picked up in our store.
R12633 -  2-1/4" Blade Bolt Replaces Exmark 3213-6 R12633 - 2-1/4" Blade Bolt Replaces Exmark 3213-6

Replaces OEM: EXMARK 3213-6
Fits Triton Blades.
LENGTH: 2-1/4"
THREAD SIZE: 1/2 - 13

Our Price: $1.55
This item must be picked up in our store.
R13240 - 1/2-20 X 2" Blade Bolt For Exmark 3213-5 R13240 - 1/2-20 X 2" Blade Bolt For Exmark 3213-5

Replaces OEM: EXMARK 3213-5
Screw/Blade Bolt. 1/2-20 X 2" Grade 8
LENGTH: 2"
THREAD SIZE: 1/2"

Our Price: $1.95
R1191 Universal Blade Spacer fits Bobcat, Bunton, Exmark, Scag & Snapper R1191 Universal Blade Spacer fits Bobcat, Bunton, Exmark, Scag & Snapper

Replaces BOBCAT/RANSOMES: 64163-12
BUNTON-GOODALL: PL0617
EXMARK: 1-303164, 1-323539
SCAG: 43038, 43278, 43592
SNAPPER/KEES: 7-6436, 7076436, 7076436YP
ID: 5/8"
OD: 1"
THICKNESS: 1/4"

Our Price: $1.99
This item must be picked up in our store.
R8999 - Retainer Bushing Replaces Exmark 3322154 R8999 - Retainer Bushing Replaces Exmark 3322154

Replaces EXMARK 3322154, Husqvarna 539102484
Used on Exmark 3322154 wheel assembly & our R8197 wheel assembly for Gravely.
OD 1-1/2" (38.10MM), ID 3/4" (19.05MM). THE O.D. ON THE FIRST STEP IS 1.390".

Our Price: $1.99
This item must be picked up in our store.
R13504 - HH 5/8-11 x 1 Blade Bolt For Exmark 103-1026 R13504 - HH 5/8-11 x 1 Blade Bolt For Exmark 103-1026

Replaces OEM: EXMARK 103-1026
HH 5/8-11 x 1 Grade 8
Fits Triton Blades
LENGTH: 1"
SIZE: 5/8-11

Our Price: $1.99
This item must be picked up in our store.
R11566 - 5/8"-18 x 2-3/4 Blade Bolt Replaces Exmark 103-0862 R11566 - 5/8"-18 x 2-3/4 Blade Bolt Replaces Exmark 103-0862

Replaces Exmark 103-0862
5/8"-18 thread x 2-3/4" cap screw, yellow zinc
DIAMETER: 5/8"
LENGTH: 2-3/4"
THREAD SIZE: 18

Our Price: $2.45
This item must be picked up in our store.
R8190 - Caster Yoke Spacer Replaces Exmark 1-303314 R8190 - Caster Yoke Spacer Replaces Exmark 1-303314

Replaces Scag 43037-01 and Exmark 303314.
HEIGHT: 1/2"
ID: 7/8"
OD: 1-1/2"

Our Price: $2.50
This item must be picked up in our store.
R7249 Blade Spacer for Scag, Bobcat, Bunton, Snapper & Exmark R7249 Blade Spacer for Scag, Bobcat, Bunton, Snapper & Exmark

USED ON SCAG, BOBCAT, BUNTON, SNAPPER, and EXMARK
HEIGHT:  1/2"
ID:  5/8"
OD:  1"

Our Price: $2.50
This item must be picked up in our store.
R11039 Hex Lock Nut Replaces Exmark 3296-51 R11039 Hex Lock Nut Replaces Exmark 3296-51

Replaces Exmark 3296-51
Size 3/4"-10
Used with R10194 caster yoke

Our Price: $2.50
This item must be picked up in our store.
R5703 - Caster Bushing fits Bunton, Exmark & Snapper R5703 - Caster Bushing fits Bunton, Exmark & Snapper

Replaces; Bunton-Goodall PLO928, Exmark 303041, 1-303041, Snapper/Kees 7-6515, 7076515, 7076515YP
Used on Bunton support arm PAL-0937A
HEIGHT: 1-1/4"
ID: 7/8"
OD: 1-1/8"

Our Price: $2.50
This item must be picked up in our store.
R8411 WHEEL BOLT FOR EXMARK R8411 - 1/2" x 6" WHEEL BOLT FOR EXMARK

R8411 WHEEL BOLT FOR EXMARK
REPL EXMARK 1-800334
Fits EXMARK midsized mowers 36", 48", 52" & 60" decks.
For models Turf Ranger, Turf Tractor, Viking & Metro models 80000
series and higher. Used with our R8447 wheel bolt nut.
1/2" x 6"

Our Price: $2.99
This item must be picked up in our store.
1722676SM Simplicity Hub Cap, Grey 1722676SM Simplicity Hub Cap, Grey

Replaces Simplicity 1722676
2.361 D, Grey Poly 1.3H, Viper

Our Price: $2.99
This item must be picked up in our store.
R10014 Caster Yoke Bearing Seal Replaces Exmark 1-543511 R10014 Caster Yoke Bearing Seal Replaces Exmark 1-543511

Replaces Exmark 543511, 1-543511
ID:  1-1/4"
OD:  2"
WIDE DIAMETER:  1/4"

Our Price: $3.15
This item must be picked up in our store.
R10013 Front Seal Wheel Bearing Replaces Exmark 633580 R10013 Front Seal Wheel Bearing Replaces Exmark 633580

Replaces EXMARK 1-633580, 103-0063, 633580
FERRIS 5022631SX3, Great Dane D38065
SCAG 482622
Fits Exmark Lazer Z Unites
ID: 1-1/8"
OD: 1-3/4"
WIDE DIAMETER: 7/16"

Our Price: $3.15
This item must be picked up in our store.
R8419 WHEEL BOLT FOR TORO/ EXMARK R8419 - 1/2" x 5-1/4" WHEEL BOLT FOR TORO/ EXMARK

R8419 WHEEL BOLT FOR TORO
REPL  TORO 325-19 & EXMARK 800334.
Fits TORO commercial midsize 36", 37", 44", 52" & 62" cut deck.
Fits models 30136, 30137, 30144, 30152 & 30162.
Fits TORO wheel 68-8970.
1/2" x 5-1/4"

Our Price: $3.50
This item must be picked up in our store.
R10356 - 3 Prong Clamping Knob R10356 - 3 Prong Clamping Knob

CLAMPING KNOB 5/16" - 18 MALE THREADS

Our Price: $3.50
This item must be picked up in our store.
R10358 - 3 Prong Clamping Knob R10358 - 3 Prong Clamping Knob

CLAMPING KNOB 3/8" - 16 MALE THREADS

Our Price: $3.50
This item must be picked up in our store.
R10357 - Fluted Torque Knobs Replace Exmark 1323385 R10357 - Fluted Torque Knobs Replace Exmark 1323385

Replaces OEM#: EXMARK 1323385
SNAPPER/KEES 7023735, 7102990, 7105085YP
THREADS: 5/16"-18
THREADS: FEMALE

Our Price: $3.50
This item must be picked up in our store.
10359 -Fluted Torque Knobs R10359 Fluted Torque Knobs

CLAMPING KNOB 3/8" - 16 FEMALE THREADS

Our Price: $3.50
This item must be picked up in our store.
863 - KNOB & BOLT SET FOR FOLD-DOWN HANDLES R863 - Knob & Bolt Set for Fold-Down Handles

Replaces AYP/ROPER/SEARS 131959, 136376, 183724, 532183724, 63688
MTD 09966, 710-0405, 710-1174, 720-0241, 720-4072A, 910-0405, 910-1174, 920-0241
Knob & Bolt Set for Fold-Down Handles

Our Price: $3.99
This item must be picked up in our store.
R9565 - Plastic Knob Assembly Replaces MTD 920-0241 R9565 - Plastic Knob Assembly Replaces MTD 920-0241

Replaces MTD 920-0241
FITS '94 MONTGOMERY WARD SNOWTHROWERS,
MTD EDGERS FROM '95-'98,
MTD WALKBEHIND MOWERS MODELS 111-314
& MTD TURF POWER WALKBEHIND MOWERS.

Our Price: $3.99
This item must be picked up in our store.
15-425 Oregon Alternator Drive Belt Replaces Exmark 1-633853 15-425 Oregon Alternator Drive Belt Replaces Exmark 1-633853

Replaces Exmark 633853, 1-633853
For Water Cooled Lazer Z Mowers (1999-2001)
Size: 7/16"x25-5/8"

Our Price: $4.25
This item must be picked up in our store.
S285-020 - Belt Cover Knob for Exmark 1-323385 S285-020 - Belt Cover Knob for Exmark 1-323385

Replaces Exmark 1-323385
Hustler 075291
Fits Exmark Metro and Viking with 36", 48" and 52" decks;
Lazer Z and Lazer Z Triton deck group with 52", 60" and 72" decks;
Turf Tracer Hydro with floating decks
Husqvarna LZ with 52", 60" and 72" cutting decks
Hustler Super Z with 52", 60" and 72" decks, 2002-2007, Excluding XR-7 decks
Thread 5/16" -18

Our Price: $4.75
This item must be picked up in our store.
R8409 - 1/2 X 3/4 Spanner Bushing Replaces Exmark 1-513547 R8409 - 1/2 X 3/4 Spanner Bushing Replaces Exmark 1-513547

Replaces Exmark 513547, 1-513547
HEIGHT: 4-5/8"
ID: 1/2"
OD: 3/4"

Our Price: $4.99
This item must be picked up in our store.
R8305 Caster Yoke Support Arm Bushing Replaces Exmark 303514 R8305 Caster Yoke Support Arm Bushing Replaces Exmark 303514

Replaces Encore 363007
Exmark 1-303044, 1-303514, 303044, 303514
Husqvarna 539101232
Kees 101232, 363194, 976514
Lesco 050339
Scag 48100-01
Snapper 7-6514, 7076514, 7076514YP
FLANGE OD: 1-1/2"
HEIGHT: 1-1/4"
ID: 7/8"
OD: 1-1/8"

Our Price: $4.99
This item must be picked up in our store.
54 755 01-S Genuine Kohler Knob Kit with Seal 54 755 01-S Genuine Kohler Knob Kit with Seal

KIT-KNOB W/SEAL
* This part replaces: 54 755 01-S, KH-24-755-91, KH-54-755-01

Our Price: $5.50
This item must be picked up in our store.
R14221 Clevis Hitch Pin Replaces Velke VKPIN2-2 R14221 Clevis Hitch Pin Replaces Velke VKPIN2-2

Replaces Velke VKPIN2-2
Attaches Velke to mower bracket.
Fits all one wheel Velkes
LENGTH: 4-1/4"
OD: 1/2"

Our Price: $5.99
This item must be picked up in our store.
R10017 - Wheel Spacer Replaces Exmark 1-633579 R10017 - Wheel Spacer Replaces Exmark 1-633579

Replaces Exmark 1-633579
Fits Exmark Laser Z 13 x 500 x 6wheels.
Used with our R9804 wheel.
ID 1/2"; OD 3/4"; Length 5-7/8"

Our Price: $6.15
This item must be picked up in our store.
720-0274 MTD Handle Grip 720-0274 MTD Handle Grip

* This part replaces: 1703539, 1705359, 1800401,
9126, GW-1703539, GW-180885, GW-9126, GW-B1703539
GRIP-HANDLE BLK RZT/33

Our Price: $6.50
This item must be picked up in our store.
R10813 Short Swivel Replaces Exmark 603676, 1-603676 R10813 Short Swivel Replaces Exmark 603676, 1-603676

BORE:  11/32"
OD:  5/16"
TOTAL LENGTH:  1-7/32"

Our Price: $6.89
This item must be picked up in our store.
9658 Plunger Interlock Switch for Ariens, AYP, Exmark, John Deere, Ferris, Bobcat & Snapper R9658 Plunger Interlock Switch for Ariens, AYP, Exmark, John Deere, Ferris, Bobcat & Snapper

Replaces OEM: ARIENS 30957
AYP/ROPER/SEARS 104445X, 109869X
BLACK ROCK 119-3501
BOBCAT/RANSOM 38383
COMMERCIAL TURF PROD 18324
EXMARK 1-513152, 513152
FERRIS 21769
GREAT DANE D38085
JOHN DEERE AM108483
SIMPLICITY/ALLIS CHA 1708207, 1708207SM
SNAPPER/KEES 27225, 7027225, 923408
Single pole, snap in mounting. Normally closed.

Our Price: $6.99
This item must be picked up in our store.
R6917 - 5" X 2.75" Deck Wheel, 2-1/2"Offset, 5/8" Center Hole R6917 - 5" X 2.75" Deck Wheel, 2-1/2"Offset, 5/8" Center Hole

Replaces OEM #: BAD BOY 022-5234-98
BUNTON-GOODALL PL7540
EXMARK 1-603299, 603299
GILSON 710138
KUBOTA K5371-42110
TORO 1-603299, 68-2730
YAZOO 2302-127, YK

BORE: 5/8"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

For Hardware, order R10007 Anti-Scalp Roller Kit for EXMARK

Our Price: $6.99
This item must be picked up in our store.
R8671 Clevis Pin Replaces Velke VKPIN2-2 R8671 Clevis Pin Replaces Velke VKPIN2-2

Replaces Velke VKPIN2-2  
Attaches Velke to mower bracket.
Fits all one wheel Velkes
DIAMETER:  1/2"
LENGTH:  4-29/32"

Our Price: $6.99
This item must be picked up in our store.
R9664 Plunger Interlock Switch for AYP, Exmark, John Deere, MTD & Scag R9664 Plunger Interlock Switch for AYP, Exmark, John Deere, MTD & Scag

Replaces OEM: AYP/ROPER/SEARS: 121305X, 532121305, 532421062
BOLENS: 1761083
COMMERCIAL TURF PROD: 1001717
CUB CADET: 725-3166, 925-3166
EXMARK: 740275
GARDEN WAY: 1761083
GREAT DANE: AM104403, D28041
HUSQVARNA: 506909601, 532121305
JOHN DEERE: AM-104403
MTD: 725-3166, 9253166
MURRAY: 094159, 094159MA, 7023354YP, 94159
SCAG: 48717
SIMPLICITY/ALLIS CHA: 1714770, 7023354, 7023354YP
SNAPPER/KEES: 2-3354, 7023354, 7023354YP
TORO: 74-0275
TROY BILT: GW-1761083
WRIGHT: 524-10001
Right angle snap mounted. Normally closed.

Our Price: $7.50
This item must be picked up in our store.
9143- 3/8"-24 ADJUSTABLE YOKE END R9143 Universal adjustable yoke end. 3/8" - 24 female, for 3/8" pin

Replaces OEM#: Exmark 633131, John Deere M80373, Grasshopper 265545 & Noma 305530.

Our Price: $7.50
This item must be picked up in our store.
R9142 5/16" ADJUSTABLE YOKE END UNIVERSAL R9142 5/16" ADJUSTABLE YOKE END UNIVERSAL

Replaces:
BOBCAT/RANSOM 38020
DIXIE CHOPPER 20214
EXMARK 303105
GRASSHOPPER 265537
OREGON 06-003
SUNBELT B1SB9142
SUNBELT B1SB9142  

THREADS:  5/16" - 24 FEMALE, FOR 5/16" PIN

Our Price: $7.99
This item must be picked up in our store.
R6892 - 1" Foam Grips for Scag, Bobcat, Exmark and Other Midsize Mowers R6892 - 1" Foam Grips for Scag, Bobcat, Exmark and Other Midsize Mowers

DIAMETER: 1"
Fits Scag, Bobcat, Exmark and Other Midsize Mowers

Our Price: $7.99
This item must be picked up in our store.
R10007 - Anti-Scalp Roller Hardware Kit Replaces Exmark 1-603602 R10007 - Anti-Scalp Roller Hardware Kit Replaces Exmark 1-603602

Replaces OEM Part No.s
Exmark 603602 Bushing
Exmark 98-5961 bolt
Exmark 3290-357 nut
Exmark 373034 pivot washer
Exmark 98-5975 spring washer

Used with our R6917 Deck Wheel

Our Price: $8.75
This item must be picked up in our store.
R12015 Anti Scalp Roller Deck Wheel Replaces Exmark 103-8415 R12015 Anti Scalp Roller Deck Wheel Replaces Exmark 103-8415

Replaces OEM #: Exmark 103-8415
Fits Exmark Triton decks.
Size: ID 5/8"; Width 3-1/4"; Height 5"
For complete kit with hardware, see product number R12018

Our Price: $8.99
This item must be picked up in our store.
15-416 Oregon Ground Drive Belt Replaces Exmark 1-543548 15-416 Oregon Ground Drive Belt Replaces Exmark 1-543548

Replaces Exmark 543548, 1-543548
For Turf Ranger (1991-2005)
Size: 1/2"x36-5/8"

Our Price: $8.99
This item must be picked up in our store.
8586- WHEEL BUSHING 3/8 X 5/8 FOR EXMARK R8586- WHEEL BUSHING 3/8 X 5/8 FOR EXMARK

Replaces; EXMARK 603602, OREGON 48-007, STENS 225-205, SUNBELT B1CO86 & SUNBELT B1SB8586.
Fits in wheel 603299 on Exmark commercial mowers. Models Turf Ranger, Turf Tracer Explorer.
ID 3/8", OD 5/8", Length 2-13/16", Flange OD 1"

Our Price: $9.75
This item must be picked up in our store.
R9622 Universal Ignition Switch R9622 Universal Ignition Switch

Replaces OEM #: AIRCAP 11604
AMF/DYNAMARK/NOMA 49907, 56922
ARIENS 01190600, 02456500, 52406900
AYP/ROPER/SEARS 135944
CUB CADET 725-3232, 925-0873
EXMARK 1-403121, 403121
FERRIS 1521842, 5021842
GREAT DANE D18090
HOMELITE/JACOBSEN GP-57823-8, JA13064-1
LAWNBOY 1-403121, 700171, 740015
LESCO 10943
MTD 925-0873
MURRAY 056419, 056419MA, 56419
SCAG 48609
SIMPLICITY/ALLIS CHA 1664804, 1664804SM
SNAPPER/KEES 17817, 28765, 7017817, 7028765, 7817
TROY BILT 1758145
Multi-application ignition switch fits single stage Simplicity & Snapper snowthrowers.
Includes key, lockwasher nut & cover.
2 TERMINALS/ 2 POSITIONS. INDAK Q431.

Our Price: $9.95
This item must be picked up in our store.
S215-285 Tapered Bearing Set Replaces Gravely 038199 S215-285 Tapered Bearing Set Replaces Gravely 038199

Replaces OEM: ARIENS: 05407000
BAD BOY: 010-7001-000, 011-7002-00
DIXIE CHOPPER: 10206, 10207
EXMARK: 1-543509, 543509
GRAVELY: 038199
GREAT DANE: 28051, D28052
HUSQVARNA: 539 10 26-26
JOHN DEERE: JD8933
Lawn-Boy: 703210, 703809
REF NO: L44610, L44643
SCAG: 48005-04, 48005-05, 481657, 481895, 481896, 48668
SIMPLICITY: 170835
TORO: 254-94, 27-0960
Wright Mfg.: 77460002, 77460003
Fits Models: SCAG New style spindles
ID: 1 "
OD: 2 " RACE
Height: .590 "

Our Price: $9.95
This item must be picked up in our store.
10718 - 16-1/4" Low Lift Blade Replaces Exmark 103-2507 R10718 - 16-1/4" Low Lift Blade Replaces Exmark 103-2507

Replaces OEM #: EXMARK 103-2507
Takes (3) blades for 48" cut.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $9.99
This item must be picked up in our store.
R10772 Universal Starter Solenoid, 4 pole, 12 volt R10772 Universal Starter Solenoid, 4 pole, 12 volt

Replaces OEM#:
ARIENS: 03551000, 35510
AYP/ROPER/SEARS: 109946, 146154, 532146154
BOLENS: 1753539
BRIGGS & STRATTON: 5410H, 5410K
CASE/INGERSOLL: C-33025
GILSON: 212655
GRASSHOPPER: 184251
GRAVELY: 0355100, 03551000, 355100, 45071
HUSQVARNA: 146154, 532 10 90-81, 532 10 99-46, 532145673, 532146154, 532175141, 532178861
JOHN BEAN: AM133094
JOHN DEERE: AM138497
LAWNBOY: 740207
MTD: 725-04437
MURRAY: 745001MS
SIMPLICITY/ALLIS CHA: 16771993, 16852980, 1700751
SNAPPER/KEES: 1-8604, 1755382YP, 7075622, 7075622SM, 75622
TORO: 1101162, 1101167, 47-1910, 740207
Universal Starter Solenoid. 4 Pole, 12 Volt
**Terminal Post will accomodate both 5/16"&1/4" connectors.
**Mounting Bracket will accomodate both chassis and wall mount configurations.
UPPER STUD THREAD: 5/16"
LOWER STUD THREAD: 1/4"

Our Price: $9.99
This item must be picked up in our store.
R12301 Flat Idler Pulley Replaces Exmark 109-3397 R12301 Flat Idler Pulley Replaces Exmark 109-3397

Replaces OEM#: EXMARK 109-3397
COMPOSITE IDLER PULLEY
FITS QUEST MODELS.
HEIGHT: 3/4"
ID: 11/16"
OD: 3-1/2"

Our Price: $9.99
This item must be picked up in our store.
R9992 - Wheel Spacer Replaces Exmark 1-633959 and Scag 43583 R9992 - Wheel Spacer Replaces Exmark 1-633959 and Scag 43583

Replaces Exmark 1-633959, Scag 43583, Toro E633959
Fits Exmark Laser Z 13X650X6 Wheels
ID: 1/2"
LENGTH: 7-1/2"
OD: 3/4"

Our Price: $9.99
This item must be picked up in our store.
15-419 Oregon Transmission Drive Belt Replaces Exmark 1-603295 15-419 Oregon Transmission Drive Belt Replaces Exmark 1-603295

Replaces Exmark 603295, 1-603295
For Turf Tracer 5- Speed Mowers
Size: 5/8"x40-9/16"

Our Price: $10.22
This item must be picked up in our store.
15-398 Oregon Fan Pump Drive Belt Replaces Exmark 103-5598 15-398 Oregon Fan Pump Drive Belt Replaces Exmark 103-5598

Replaces Exmark 103-5598
Fan Pump Drive
For water-cooled Lazer Z Mowers (2004-2005)
Size: 21/32"x26"

Our Price: $10.50
This item must be picked up in our store.
9988 - 16-1/4" Heavy Duty Mulcher Blade Replaces Exmark 1-403148 9988 - 16-1/4" Heavy Duty Mulcher Blade Replaces Exmark 1-403148

Replaces OEM #: Exmark 1-403148, 103-6581-S
Takes (3) blades for 48" cut.
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $10.60
This item must be picked up in our store.
R8998 - Roller Cage Bearing Replaces Exmark 1-513809 R8998 - Roller Cage Bearing Replaces Exmark 1-513809

Replaces Exmark 513809, 1-513809
HEIGHT: 3-23/32" ID: 49/64" OD: 1-1/4"

Our Price: $10.75
This item must be picked up in our store.
10420 - 15-1/4" Solid Air Foil High Lift Blade Replaces Exmark 103-1579 10420 - 15-1/4" Solid Air Foil High Lift Blade Replaces Exmark 103-1579

Replaces OEM: EXMARK 103-1579, 103-1579-S
C. H. DIA: 5/8"
LENGTH: 15-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (3) blades for 44" cut.

Our Price: $10.80
This item must be picked up in our store.
R6175 - 16 1/4" Mulching Blade Replaces Exmark 403086 R6175 - 16 1/4" Mulching Blade Replaces Exmark 403086

Replaces OEM #: EXMARK 403086 & 403148
Takes (3) blades for 48" cut
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 16-1/4"
THICKNESS: 0.1600"
WIDTH: 2-1/2"

Our Price: $10.99
This item must be picked up in our store.
R6178 - 17-15/16" Mulching Blade Replaces Exmark 303495 R6178 - 17-15/16" Mulching Blade Replaces Exmark 303495

Replaces OEM #: BAD BOY 038-5220-00
EXMARK 1-303495, 1-633484, 103-2518-S, 303495
Takes (2) blades for 36" cut
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 17-15/16"
THICKNESS: 0.1600"
WIDTH: 2-1/2"

Our Price: $10.99
This item must be picked up in our store.
R6216 - 20 1/2" Low Lift Blade Replaces Exmark 603661 R6216 - 20 1/2" Low Lift Blade Replaces Exmark 603661

Replaces OEM #: EXMARK 603661, 1-603661
Takes (3) blades for 60" cut. Fits models FMD60
C. H. DIA: 1/2"
CUT DIRECTION: RIGHT
LENGTH: 20-1/2"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $10.99
This item must be picked up in our store.
R6217 - 18" Low Lift Blade Replaces Exmark 603844 R6217 - 18" Low Lift Blade Replaces Exmark 603844

Replaces OEM #: EXMARK 603844, 1-603844
Takes (3) blades for 52" cut.
Fits models FMD52.
C. H. DIA: 1/2"
CUT DIRECTION: RIGHT
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $10.99
This item must be picked up in our store.
R6291 - 17-29/32" Mulching Blade Replaces Exmark 633484 R6291 - 17-29/32" Mulching Blade Replaces Exmark 633484

Replaces OEM #: EXMARK 633484, 103-6584-S, 103-6582-S
Takes (3) blades for 52" cut
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 17-29/32"
THICKNESS: 0.2040"
WIDTH: 2-1/2

Our Price: $10.99
This item must be picked up in our store.
R6821 - 15-1/4" High-Lift Blade Replaces Exmark 653101 R6821 - 15-1/4" High-Lift Blade Replaces Exmark 653101

Replaces OEM #: EXMARK 653101, 103-2529-S
Takes (3) blades for 44" cut.
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 15-5/16"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $10.99
This item must be picked up in our store.
R12119 - Spindle Bearing Replaces Exmark 103-2477 R12119 - Spindle Bearing Replaces Exmark 103-2477

Replaces Exmark 103-2477
HEIGHT: 0.7080"
ID: 1"
OD: 2.0475"
Bearing No. RA100RR7

Our Price: $10.99
This item must be picked up in our store.
R12300 Flat Idler Pulley Replaces Exmark 109-4076 R12300 Flat Idler Pulley Replaces Exmark 109-4076

Replaces OEM#: EXMARK 109-4076
COMPOSITE PUMP IDLER PULLEY
FITS LAZER Z & FRONT RUNNER MODELS.
HEIGHT: 1"
ID: 11/16"
OD: 2-3/4"

Our Price: $10.99
This item must be picked up in our store.
R12017 - Anti Scalp Wheel Axle Replaces Exmark 103-5364 R12017 - Anti Scalp Wheel Axle Replaces Exmark 103-5364

Replaces Exmark 103-5364, 109-9851
Included in our R12018 & R12016 wheel kits.

Our Price: $10.99
This item must be picked up in our store.
R9752 Brake Drum Replaces Exmark 1-323261 R9752 Brake Drum Replaces Exmark 1-323261

ID:  2-1/4"
OD:  6"
WIDTH:  1-1/4"
BRAKE DRUM FITS METRO UNITS.  
INCLUDED IN # 9751 ASSEMBLY.

Our Price: $10.99
This item must be picked up in our store.
10419 - 16-1/4" Solid Air Foil High Lift Blade Replaces Exmark 103-1577 10419 - 16-1/4" Solid Air Foil High Lift Blade Replaces Exmark 103-1577

Replaces OEM: EXMARK 103-1577, 103-1577-S
C. H. DIA: 5/8"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2
"Takes (2) blades for 32" cut,
(3) blades for 48" cut.

Our Price: $10.99
This item must be picked up in our store.
11240 - 16-1/4" Mulching Blade Replaces Exmark 103-6391 11240 - 16-1/4" Mulching Blade Replaces Exmark 103-6391

Replaces OEM: EXMARK 103-6391, 103-6391-S
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (3) blades for 48" cut.

Our Price: $10.99
This item must be picked up in our store.
R14440 Splined Blade Bushing Replaces Exmark 103-3037 R14440 Splined Blade Bushing Replaces Exmark 103-3037

Replaces Exmark 103-3037
Splined blade bushing for all Exmark blades with 0.94" center hole.
FITS OUR R13005 & R13540 Spindle assemblies.
HEIGHT: 1"
ID: 1/2"
Flange OD: 1-3/4"

Our Price: $10.99
This item must be picked up in our store.
R14672 Ignition Switch fits Murray, Simplicity, Snapper, Scag, Troy Bilt, MTD & Exmark R14672 Ignition Switch fits Murray, Simplicity, Snapper, Scag, Troy Bilt, MTD & Exmark

Replaces SCAG 48609, SNAPPER 7017817, Troy Bilt GW-1758145, MTD & Troy Bilt 925-0873,
EXMARK 1-403121, SIMPLICITY 1664804SM, MURRAY 7017817YP.
Ignition Switch Magneto, 2 Positions, 2 Terminals, 5/8" mounting stem.
Includes Hardware.
On/off switch.

Our Price: $10.99
This item must be picked up in our store.
R15441 - 22" Left Hand Bagging Blade Replaces Exmark 130-2860 R15441 - 22" Left Hand Bagging Blade Replaces Exmark 130-2860

Replaces Exmark/Toro 130-2860
Fits 42" cut Exmark Navigator and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
Left Hand.
Painted BLACK.
LENGTH: 22"
WIDTH: 2-3/4"
C. H. DIA: 0.8850"
THICKNESS: 0.1870"
CUT DIRECTION: Left Hand

Our Price: $10.99
This item must be picked up in our store.
R15440 - 22" Right Hand Bagging Blade Replaces Exmark 130-2859 R15440 - 22" Right Hand Bagging Blade Replaces Exmark 130-2859

Replaces Exmark/Toro 130-2859
Fits 42" cut Exmark Navigator and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
Right Hand.
Painted RED.
LENGTH: 22"
WIDTH: 2-3/4"
C. H. DIA: 0.8850"
THICKNESS: 0.1870"
CUT DIRECTION: Right Hand

Our Price: $10.99
This item must be picked up in our store.
R15461 Spindle Pulley Replaces Exmark 116-2456 R15461 Spindle Pulley Replaces Exmark 116-2456

Replaces Exmark 116-2456
Fits Exmark Pioneer & Quest Mowers.
Idler used from Engine Pulley to Drive Pumps.
Composite.
ID 3/8"
OD 3-1/2"
Height 3/4"

Our Price: $10.99
This item must be picked up in our store.
11269 - 15-1/4" Exmark 103-6400 Notched Air Foil Hi-Lift Blade 11269 - 15-1/4" Notched Air Foil Hi-Lift Blade Replaces Exmark 103-6400

Replaces OEM: EXMARK 103-6400.
C. H. DIA: 15/16"
LENGTH: 15-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (3) blades for 44" cut.

Our Price: $11.15
This item must be picked up in our store.
6820 - 15-1/4" Mulching Blade Replaces Exmark 653102 6820 - 15-1/4" Mulching Blade Replaces Exmark 653102

Replaces OEM #: EXMARK 653102, 103-2519-S
Takes (3) blades for 44" cut
C. H. DIA: 5/8"
CUT DIRECTION: RIGHT
LENGTH: 15-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $11.25
This item must be picked up in our store.
11241 - 18" Mulching Blade Replaces Exmark 103-6392 11241 - 18" Mulching Blade Replaces Exmark 103-6392

Replaces OEM: EXMARK 103-6397, 103-6392-S
C. H. DIA: 15/16"
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (2) blades for 36" cut. (3) blades for 52" cut.

Our Price: $11.25
This item must be picked up in our store.
11451 - 18" Low Lift Blade Replaces Exmark 103-6387-S 11451 - 18" Low Lift Blade Replaces Exmark 103-6387-S

Replaces OEM: EXMARK 103-6387, 103-6387-S
C. H. DIA: 15/16"
LENGTH: 18"
WIDTH: 2-1/2"
Takes 3 blades for 52" cut.

Our Price: $11.25
This item must be picked up in our store.
R9380 Transmission Oil Filter fits Encore, Exmark, Ferris, Scag & more R9380 Transmission Oil Filter fits Encore, Exmark, Ferris, Scag & more

Replaces OEM#: Cushman 834702
Deweze 520403
Encore 453048
Exmark 103-2146
Ferris 1521357, 5021357X1
Hustler 783936
Scag 48757, 48758
Toro 28-1370
Seal Outer diameter: 2-3/4"
Mounting Thread: 1"-12
Micron: 10
Anti Drain Back Valve: No
Outer Diameter: 3-11/16"
Height: 5-1/4"

Our Price: $11.29
This item must be picked up in our store.
11771 - 16-1/4" Mulching Blade Replaces Exmark 103-8288-S 11771 - 16-1/4" Mulching Blade Replaces Exmark 103-8288-S

Replaces OEM: EXMARK 103-8288, 103-8288-S
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 3"
Takes (3) blades for 46" cut.

Our Price: $11.30
This item must be picked up in our store.
11494 - 16 1/4" Low-Lift Blade Replaces Exmark 103-6386-S 11494 - 16 1/4" Low-Lift Blade Replaces Exmark 103-6386-S

Replaces OEM: EXMARK 103-6386, 103-6386-S
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (2) blades for 32" cut
and (3) blades for 48" cut.

Our Price: $11.35
This item must be picked up in our store.
11279 - 16-1/4" Toothed Mulching Blade Replaces Exmark 103-6396 11279 - 16-1/4" Toothed Mulching Blade Replaces Exmark 103-6396

Replaces OEM: EXMARK 103-6396, 103-6396-S, 1165177S
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (3) blades for 48" cut.

Our Price: $11.40
This item must be picked up in our store.
15-427 Oregon Blower Drive Belt Replaces Exmark 1-653333 15-427 Oregon Blower Drive Belt Replaces Exmark 1-653333

Replaces Exmark 653333, 116-6893, 1-653333, 116-7437
For Ultra Vacs (48")
Size: 1/2"x38-1/2"
Belt Type: Wrapped Clutching

Our Price: $11.44
This item must be picked up in our store.
R8984 Deck Support Bushing Replaces Exmark 1-513336 R8984 Deck Support Bushing Replaces Exmark 1-513336

Replaces; EXMARK 513336, 1-513336
Fits models Turf Ranger. (nylon) (black)
FLANGE OD: 1-5/8"
HEIGHT: 11/16"
ID: 15/16"
OD: 1-1/4"

Our Price: $11.50
This item must be picked up in our store.
10249 - 20-1/2" Low Lift Sand Blade Replaces Exmark 612111 10249 - 20-1/2" Low Lift Sand Blade Replaces Exmark 612111

Replaces OEM:EXMARK 103-2510, 103-2510-S
C. H. DIA: 5/8"
LENGTH: 20-1/2"
THICKNESS: 0.2030"
WIDTH: 2-1/2"
Takes (3) blades for 60" cut.
Same as our R6216 but with a 5/8" center hole.

Our Price: $11.50
This item must be picked up in our store.
12002 - 16-1/4" High Lift Notched Blade Replaces Exmark 103-8251 12002 - 16-1/4" High Lift Notched Blade Replaces Exmark 103-8251

Replaces OEM: EXMARK 103-8251, 109-6460-S
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 3"
Takes (3) blades for 46" cut.
Fits Exmark 46" Lazer Z Triton Deck

Our Price: $11.50
This item must be picked up in our store.
R14728 - Drive Belt Replaces Exmark 116-7116 R14728 - Drive Belt Replaces Exmark 116-7116

Replaces Toro & Exmark 116-7116
Raw Edge 3V x 30.75"
Coggged, Neoprene, Aramid cord construction.
Fits Exmark ECKA30, 30" Commercial Walk-Behind Mower.

Our Price: $11.50
This item must be picked up in our store.
R10667 - 20-1/2" Notched High Lift Blade Replaces Exmark 103-2530 R10667 - 20-1/2" Notched High Lift Blade Replaces Exmark 103-2530

Replaces OEM: BAD BOY 038-2007-00, 038-6050-00
EXMARK 103-2530, 103-2530-S
TORO/WHEEL HORSE 105-7718-03
3 BLADES FOR 60" CUT
C. H. DIA: 5/8"
LENGTH: 20-1/2"
THICKNESS: 0.2040"
WIDTH: 2-1/2"

Our Price: $11.55
This item must be picked up in our store.
11450 - High Lift Blade for Exmark 36"/52" 11450 - 18" High Lift Blade for Exmark 52" Cut

Replaces OEM: EXMARK 103-6402
C. H. DIA: 15/16"
LENGTH: 18"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (3) blades for 52" cut.

Our Price: $11.65
This item must be picked up in our store.
11496 Exmark 103-6388 Low Lift Blade for 60" cut 11496 - 20-1/2" Low Lift Blade Replaces Exmark 103-6388 for 60" Cut

Replaces OEM: EXMARK 103-6388.
C. H. DIA: 15/16"
LENGTH: 18"
THICKNESS: 0.2040
WIDTH: 2-1/2"
Takes (3) blades for 60" cut.

Our Price: $11.70
This item must be picked up in our store.
11493 - 16 1/4" High Lift Blade Replaces Exmark 103-6381 11493 - 16 1/4" High Lift Blade Replaces Exmark 103-6381

Replaces OEM: EXMARKÂ 103-6381.
C. H. DIA: 15/16"
LENGTH: 16-1/4"
THICKNESS: 0.2040"
WIDTH: 2-1/2"
Takes (2) blades for 32" cut
and (3) blades for 48" cut.

Our Price: $11.75
This item must be picked up in our store.
11783 - 20-3/4" Mulching Blade Replaces Exmark 103-8107 11783 - 20-3/4" Mulching Blade Replaces Exmark 103-8107

Replaces OEM: EXMARK 103-8107, 109-5396-S
C. H. DIA: 15/16"
LENGTH: 20-3/4"
THICKNESS: 0.2040"
WIDTH: 3"
Takes (3) blades for 60" cut.
Fits Exmark 60" Lazer Z Triton Deck

Our Price: $11.80
This item must be picked up in our store.