R10559 HEX NUT FOR DIXIE CHOPPER

REPL DIXIE CHOPPER N-167
Used in Dixie Chopper 10161 & 10161L spindle assemblies.
1 per assembly, 3 per unit.
1" ID x 1-1/2" OD

Replaces Dixie Chopper W101
HEIGHT: 1/8"
ID: 5/8"
OD: 2-1/4"

Replaces DIXIE CHOPPER 67204
5/8 X 7/8

Replaces Dixie Chopper 10203
Fits our R9573 wheel assembly
HEIGHT: 1"
ID: 5/8"
OD: 7/8"

Replaces: ARIENS 05403900, 05435100
BEARING SC0288LU
HAHN ECLIPSE 326985
SNAPPER/KEES 1-0756, 7010756, 7010756YP
May be used with or without retaining clip.
Fits McLane and Star Clipper edgers.
Bearing No. 99502H-2RSNR.
HEIGHT: 7/16"
ID: 5/8"
OD: 1-3/8"

Replaces OEM: DIXIE CHOPPER S-114.
1/2"-13 Stud.
THREAD SIZE: 1/2"

Replaces OEM: Dixie Chopper 400275
HEIGHT: 1/2"
ID: 5/8"
OD: 1-3/8"

Replaces DIXIE CHOPPER 10205, 120050
McLANE 2036
SNAPPER/KEES 1-2390, 35358, 7035358, 7035358SM
WALKER 5037, 5037-1
BEARING 44F40P
HEIGHT: 1/2"
ID: 5/8"
OD: 1-3/8"

Replaces (OEM): EXMARK 1-543509, 254-94
FERRIS 5020884
GILSON 1045, 1046
GRAVELY 2124580, 38199
SCAG 481657, 48668
ZAMA 0015030V
BEARING L44610, L44643
FITS GRAVELY 50" (3) BLADE DECK & 40" (2) BLADE DECK.
ALSO FITS TORO 36", 44" & 52" FRONT SPINDLE BEARING
HEIGHT: 19/32"
ID: 1"
OD: 1-31/32"

Replaces OEM#: Dixie Chopper 68250
CONDUIT:  45"
INNER WIRE:  50"
WIRE SIZE:  4-1/4"

Replaces (OEM): JOHN DEERE AM39206, DIXIE CHOPPER 40222, EXMARK 1-303284, 1-513508, 1-543365, 513508
Fits Models: DIXIE CHOPPER 300 series tractors
EXMARK Viking, Explorer, Lazer Z, Metro, Turf Ranger, Turf Tracer and 300 series tractors
HONDA 300 series tractors
JOHN DEERE 300 series tractors
TOP DIAMETER:  2-1/4"  
FOR 9" TANK DEPTH

Replaces BEARING RA100RR
BOBCAT/RANSOM 38348-01
BUNTON-GOODALL PL7323
CUB CADET 455102-R21, 586609-R92, 60069-C91, 60071-C91, IH-60071-C91, IH60071C92
DIXIE CHOPPER 30218
DIXON 539115279
DIXON INDUSTRIES 1701, 539102677, 539115279
EXMARK 1-513016
GRASSHOPPER 120081
HUSTLER 077123, 784223
JOHN DEERE 8597, JD8597
WALKER 5270
WOODS/HESSTON 60006, 70006
YAZOO 102677
Fits spindle assembly on 30", 42", 50" cut Zero Turn.
Also fits wheel hubs on Dixon Zero Turn with chain drive.
HEIGHT: 27/32"
ID: 1"
OD: 2"

Replaces Dixie Chopper 97392
Fuel filter, gas & water separator
10 micron

Replaces OEM#: DIXIE CHOPPER 68140
DIXON INDUSTRIES 539125960, 7252
EXMARK 1-523541, 523541
GRASSHOPPER 100850
GRAVELY 09246900
TORO/WHEEL HORSE E63-3752
WRIGHT 34490002
HEIGHT:  3.4040
MICRONS:  40
OD:  2.9210
THREADS:  3/4"-16

Replaces OEM: BOBCAT: 2188179, 2720396
BUNTON: PL6006, PL7488
DIXON: 18045, 539125960, 5565, 7252
ENCORE: 423063, 423361
EXMARK: 1-513211, 1-523541, 1-633750, 109-4180, 513211
FERRIS: 1521068-1, 1719168, 22028, 5022028, 5022028X1
Honda: 25641-VE4-003, 25641-ZE4-003
HUSQVARNA: 531307394, 539102606
HYDRO GEAR: 51563
KEES: 101164, 102606
SCAG: 482770
SIMPLICITY: 1719168, 1719168YP
TORO: 1-633750, 633750, E633750, E633752
Woods: 423361
Yazoo: 101164
Fits Models:
BOBCAT 633301, 633302, 634301, 634302 For 36" to 54"decks; hydro
BUNTON ZT200
DIXON 501, 502, 5501, 5017, 5020, 5023, 5421 and 5601
EXMARK Hydro units, Viking, Explorer, Lazer Z, TurfTracer, Turf Ranger and Eaton 851 transmissions
Honda HRC7013, HRC7018 and HRC7020
Thread Size: 3/4
OD: 3 "
Height: 3 1/2 "
Micron: 10
18-22 PSI pressure relief valve
Anti-drain
Honda code 4035697
Note: Not for Dixie Chopper application

Replaces Dixie Chopper 9907B41 (B41).
Raw edge, polyester cord construction.
LENGTH:  43-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 2006B44R (B44).
Fits 74" Xcaliber model.
LENGTH:  47"
WIDTH:  21/32"

Replaces Dixie Chopper 63204 (B42).
Raw edge, polyester cord construction.
LENGTH:  44-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 20256 (B38).
Raw edge, polyester cord construction.
LENGTH:  40-29/32"
WIDTH:  21/32"

Replaces OEM #: Dixie Chopper 600035
DIAMETER:  2-1/4"

Replaces Dixie Chopper 97345 (B40).
Raw edge, polyester cord construction.
LENGTH:  42-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 30234, Toro/Wheel Horse 65-5948
HEAVY DUTY RIVETED PULLEY.
HEIGHT:  1"
ID:  5/8"
OD:  4-3/8"

Replaces OEM: DIXIE CHOPPER Engine to Transmission Belt  2006A62R
Fits Iron Eagle 2350 Model. (A62 Belt)
LENGTH:  64-1/2"
WIDTH:  1/2"

Replaces OEM: DIXIE CHOPPER 30227-56
Takes 3 blades for a 56" Cut.
C. H. DIA: 5/8"
LENGTH: 20"
THICKNESS: 0.2400"
WIDTH: 2-1/2"

Replaces Dixie Chopper 68081 (B81).
Raw edge, laminated, polyester cord construction.
LENGTH:  83-13/16"
WIDTH:  21/32"

Fits parking brake on all mowers.

Replaces OEM: BOBCAT/RANSOM 48426, DIXIE CHOPPER 90122, JOHN DEERE CH12767, KUBOTA 70000-11081, TORO/WHEEL HORSE 27-7110
Fits Kubota models L275, 285, 295, 295DT, 305, 345, 345DT, 355SS, 2250, 2550, 2850, 2650, 2950, 3450, 3650, M4000, 4050, 4500, 4500C & 4500DT.  
ALSO FITS BOBCAT, JOHN DEERE, TORO, GRASSHOPPER & DIXIE CHOPPER..
Outside Diameter: 4"
Inside Diameter: 2-1/2"
Height: 10-1/4"

Replaces OEM: Dixie Chopper 200239
Fits LT Models
HEIGHT:  1-1/4"
ID:  1/2"
OD:  4-1/8"

Replaces Dixie Chopper 30204 (B78).
Raw edge, polyester cord construction.
LENGTH:  80-29/32"
WIDTH:  21/32"

Replaces OEM#: Dixie Chopper 30224
HEIGHT:  1-1/4"
ID:  1/2"
OD:  4-3/4"

Replaces Dixie Chopper 9907B57 (B57).
Fits Dixie Chopper models LT36 & LT44.
Raw edge, laminated, polyester cord construction.
LENGTH:  59-29/32"
WIDTH:  5/8"

Replaces OEM: Dixie Chopper 97319
DECK DRIVE TENSIONER/STATIONARY IDLER, C-Section V-Idler Pullley  
Fits XWD Series Diesel Units
HEIGHT:  1-1/4"
ID:  5/8"
OD:  5-1/4"

REPL DIXIE CHOPPER 2006B87R & 2008B87W
Fits 72" models, raw edge, laminated, aramid cord construction.

Replaces Dixie Chopper 65080 (B80).
Fits 50" & 60" cut models. Polyester cord construction.
LENGTH:  82-29/32"
WIDTH:  21/32"

Replaces Dixie Chopper 9907B85 (B85).
Raw edge, polyester cord construction.
LENGTH:  87-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 2006B99W (B99).
Fits 74" Xcaliber model.
LENGTH:  102"
WIDTH:  21/32"

Replaces Dixie Chopper 68082 (B82).
Raw edge, polyester cord construction.
LENGTH:  84-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 9907B84 (B84).
Raw edge, polyester cord construction.
LENGTH:  86-29/32"
WIDTH:  5/8"

Replaces Dixie Chopper 9907B94 (B94).
Fits Dixie Chopper model LT44.
Raw edge, laminated, polyester cord construction.
LENGTH:  96-29/32"
WIDTH:  5/8"

Replaces Dixie Chopper 9907B112 (B112).
Raw edge, laminated, polyester cord construction.
LENGTH:  114-13/16"
WIDTH:  21/32"

Replaces Dixie Chopper 9907B92 (B92).
Fits Dixie Chopper model LT44.
Raw edge, laminated, polyester cord construction.
LENGTH:  94-29/32"
WIDTH:  5/8"

Replaces OEM: DIXIE CHOPPER Belt 2008B100R  
BELT V-TYPE 1/2" X 102-7/8"
Raw Edge Polyester Cord
Fits Iron Eagle.  Belt - Engine - Deck 44" - 60".  (B100 Belt)
LENGTH:  102-7/8"
WIDTH:  1/2"

Replaces OEM: Dixie Chopper 300401
4" Flat Deep Idler
HEIGHT:  23/32"
ID:  41/64"
OD:  4"

Replaces OEM#: Dixie Chopper 200031
Fits LT Models
HEIGHT:  1-3/4"
ID:  19/32"
OD:  5-3/4"

Replaces Dixie Chopper 2006B98R (B98)
Fits 66" Xcaliber model.
LENGTH:  101"
WIDTH:  5/8"

Replaces Dixie Chopper 9907B130 (B130).
Raw edge, laminated, polyester cord construction.
LENGTH:  132-13/16"
WIDTH:  21/32"

Replaces OEM#: Dixie Chopper 68250 68250
45-1/4"

Replaces OEM: Dixie Chopper 9907525 X100S Pulley
Fits 60" Decks
5-3/4" X 1" Bore
HEIGHT:  1-1/2"
ID:  1"
OD:  5-3/4"

Replaces Dixie Chopper 30236-0 (B128).
Fits 60" mowers. Polyester cord construction.
LENGTH: 130-13/16"
WIDTH: 21/32"

Replaces Dixie Chopper 2006B144R (B144).
Fits 66" Xcaliber model.
LENGTH:  147"
WIDTH:  5/8"

Replaces Dixie Chopper 68162 (B162).
Fits 72" mowers.
Polyester cord construction.
LENGTH:  164-13/16"
WIDTH:  21/32"

Replaces OEM #: Dixie Chopper 400053
Painted silver.
Bearings NOT included.
For bearings, order our R9719 wheel bearing kit.
HUB: 3 1/2" CENTERED
PLY: 4 PLY
RIM: 1 PCE RIM W/FITTING
SIZE: 15X600X6
TREAD: RIB
TYPE: TUBELESS
TYPE: WHEEL ASSY

Replaces Dixie Chopper 97346C158 (C158).
Fits 72" cut with Yanmar diesel engines.
Raw edge, laminated, polyester cord construction.
LENGTH:  162-1/8"
WIDTH:  7/8"