Replaces EXMARK 3211-46
Used in our R12016 & R12018 deck wheel kits.
Grade 8
WHEEL BOLT HCS 3/8-24 X 2 YZ8

REPL TORO 32153-5
REPL EXMARK 804509
Fits our wheel bolt R8411 & R8419

Replaces EXMARK 1-633581, SCAG 43584
Fits Lazer Z units.
Fits our R9803, R9804, R9809 wheels.
Spacer for front wheel, bearing & seal.
ID: 3/4"
OD: 1-1/8"
WIDTH: 5/8"

Replaces BOBCAT/RANSOMES: 64163-12
BUNTON-GOODALL: PL0617
EXMARK: 1-303164, 1-323539
SCAG: 43038, 43278, 43592
SNAPPER/KEES: 7-6436, 7076436, 7076436YP
ID: 5/8"
OD: 1"
THICKNESS: 1/4"

Replaces Exmark 103-0862
5/8"-18 thread x 2-3/4" cap screw, yellow zinc
DIAMETER: 5/8"
LENGTH: 2-3/4"
THREAD SIZE: 18

USED ON SCAG, BOBCAT, BUNTON, SNAPPER, and EXMARK
HEIGHT:  1/2"
ID:  5/8"
OD:  1"

Replaces; Bunton-Goodall PLO928, Exmark 303041, 1-303041, Snapper/Kees 7-6515, 7076515, 7076515YP
Used on Bunton support arm PAL-0937A
HEIGHT: 1-1/4"
ID: 7/8"
OD: 1-1/8"

R8411 WHEEL BOLT FOR EXMARK
REPL EXMARK 1-800334
Fits EXMARK midsized mowers 36", 48", 52" & 60" decks.
For models Turf Ranger, Turf Tractor, Viking & Metro models 80000
series and higher. Used with our R8447 wheel bolt nut.
1/2" x 6"

Replaces Exmark 543511, 1-543511
ID:  1-1/4"
OD:  2"
WIDE DIAMETER:  1/4"

Replaces EXMARK 1-633580, 103-0063, 633580
FERRIS 5022631SX3, Great Dane D38065
SCAG 482622
Fits Exmark Lazer Z Unites
ID: 1-1/8"
OD: 1-3/4"
WIDE DIAMETER: 7/16"

R8419 WHEEL BOLT FOR TORO
REPL  TORO 325-19 & EXMARK 800334.
Fits TORO commercial midsize 36", 37", 44", 52" & 62" cut deck.
Fits models 30136, 30137, 30144, 30152 & 30162.
Fits TORO wheel 68-8970.
1/2" x 5-1/4"

Toro Lownboy Exmark wheel cap

Replaces Exmark 513547, 1-513547
HEIGHT: 4-5/8"
ID: 1/2"
OD: 3/4"

Replaces Exmark 1-633579
Fits Exmark Laser Z 13 x 500 x 6wheels.
Used with our R9804 wheel.
ID 1/2"; OD 3/4"; Length 5-7/8"

Replaces OEM #: BAD BOY 022-5234-98
BUNTON-GOODALL PL7540
EXMARK 1-603299, 603299
GILSON 710138
KUBOTA K5371-42110
TORO 1-603299, 68-2730
YAZOO 2302-127, YK

BORE: 5/8"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

For Hardware, order R10007 Anti-Scalp Roller Kit for EXMARK

Replaces OEM#: Exmark 633131, John Deere M80373, Grasshopper 265545 & Noma 305530.

Replaces OEM Part No.s
Exmark 603602 Bushing
Exmark 98-5961 bolt
Exmark 3290-357 nut
Exmark 373034 pivot washer
Exmark 98-5975 spring washer

Used with our R6917 Deck Wheel

Replaces OEM #: Exmark 103-8415
Fits Exmark Triton decks.
Size: ID 5/8"; Width 3-1/4"; Height 5"
For complete kit with hardware, see product number R12018

Replaces; EXMARK 603602, OREGON 48-007, STENS 225-205, SUNBELT B1CO86 & SUNBELT B1SB8586.
Fits in wheel 603299 on Exmark commercial mowers. Models Turf Ranger, Turf Tracer Explorer.
ID 3/8", OD 5/8", Length 2-13/16", Flange OD 1"

Replaces Exmark 513809, 1-513809
HEIGHT: 3-23/32" ID: 49/64" OD: 1-1/4"

Replaces Exmark 103-2477
HEIGHT: 0.7080"
ID: 1"
OD: 2.0475"
Bearing No. RA100RR7

Replaces Exmark 103-5364, 109-9851
Included in our R12018 & R12016 wheel kits.

Replaces EXMARK 513009, 631560, 1-631560
HEIGHT: 1/2"
ID: 1/2"
OD: 1-3/8"
Fits front caster wheels.

Roller cage bearing with retainer bushings only.
Replaces Exmark 513809.
Roller cage bearing OD 1-1/4" (31.75 mm), ID 49/64" (19.45 mm), Length 3-23/32" (94.46 mm).
Retainer bushings OD 1-1/2" (38.10 mm), ID 3/4" (19.05 mm), Height 3/8" (9.53 mm).
Size: ID 49/64", OD 1-1/4", Length 3-23/32"

Deck wheel hardware kit EXMARK for EXMARK.
Included in R12018 wheel kit.
Use with our R12015 Deck Wheel

REPLACES OEM#: EXMARK: 103-3168, 103-4051
KIT CONSISTS OF 1 PLASTIC DECK WHEEL OUR #6917 5 X 2-3/4" WITH 2-1/2" OFFSET HUB & 1EA OF THE FOLLOWING: #603602 BUSHING, #98-5961 BOLT, #3290-357 NUT, #373034 PIVOT WASHER & #98-5975 SPRING WASHER. OUR #10007.
BORE: 5/8"
HUB: 2-1/2" OFFSET
OD: 5"
TREAD: SLICK
WIDTH: 2-3/4"

Kit Replaces Exmark 110-8837
Includes (2) R813 bearings, (2) R10013 seals, and (2) R10064 spacers.
Fits Laser Z units.
Used in our R9803, R9804, and R9809, R10286, R10288 wheel assemblies.
ID: 3/4"
OD: 1-25/32"

Replaces Exmark 1-513012, 513012
Includes locking collar and set screw.
HEIGHT: 1-3/4"
ID: 1"
OD: 2"

Replaces Exmark 109-2098, 103-7263
Anti Scalp Wheel Kit.
Includes our R12015 Wheel & R12016 Hardware kit.

Replaces: BOBCAT/RANSOM 35008N
BUNTON-GOODALL PL4611, PLO609
EXMARK 1-303057, 1-303543, 303543
FERRIS 46363-5
HUSTLER 783555
JOHN DEERE 9467
SCAG 483303
SNAPPER/KEES 1-9125, 7-6510, 7019125, 7019125YP
Bearing No. 6305-2RS, 6305DU
HEIGHT: 21/32"
ID: 25 mm
OD: 2-7/16"

Fits Exmark midsize mowers with 36", 48", 52", 60" decks.
Fits Exmark wheel 322154. Fits Turf Ranger, Turf Tracer & Viking metro models from 80000 series and higher.
Kit contains our R8408 roller cage bearing with retainer bushings and R8409 spanner bushing.
Size: ID 1/2", OD 1-3/8", Length 4-21/32"

Replaces: Exmark 1-523027, 103-2913, 103-4079, 109-2339
Kubota K3111-42750

Replaces Exmark 1-523027, 103-4079, 109-2339
Fits Lazer Z Riders.

Replaces Exmark 116-0027
Fits Lazer Z & Toro Z Master.

Replaces EXMARK 1-322145-01
Fits Metro and Viking walk behinds with serial 102000 and higher.
HEIGHT: 7-1/2"
ID: 1/2"
SHAFT DIAMETER: 7/8"
SHAFT LENGTH: 7-1/2"
WIDTH: 4-3/4"

Replaces Exmark 522143, 1-522143
Fits models Turf Ranger & Turf Tracer 52" & 60" cut & Explorer 44" & 52" cut models. (Red)
BOTTOM HOLE DIAMETER: 3/4"
SHAFT DIAMETER: 1"

Replaces (OEM): BOBCAT 36129, BUNTON PL0457, EXMARK 1-302122, JOHN DEERE PT8663, KEES 362100, LESCO 050233
Fits Models: JOHN DEERE PC2003 commercial walk behind 32"-52" cut decks
Specs: Length:10" OVERALL
3/4" ID for caster yoke shaft
3/8" mounting holes
Use with our R2243 Caster Yoke

Replaces OEM #: John Deere AM115510 & Exmark 103-1224
For 700 series riders with 48", 54" cut models.
Also fits midsize walk behind mowers with 38", 48", 54" cut. Models F500, F700, FS510, FS525, F710, F725. (painted yellow)
BORE: 3/4"
PLY: 4
TIRE SIZE: 9 X 350 - 4
TREAD: SLICK
TYPE: TUBELESS
9 x 350 x 4, 4 ply smooth tread tubeless tire, 1 piece. rim, 3/4" open cage roller bearing and zerk fitting.

Replaces OEM #: Exmark 633582, 1-633582
(painted white).
Fits Exmark Lazer Z.
Uses our R813 bearings.
HUB LENGTH: 5-5/8" Centered
PLY: 4
TIRE SIZE: 13 x 500 - 6
TREAD: SLICK
TYPE: TUBELESS

Replaces; EXMARK 103-1224, 103-2171, JOHN DEERE AM115510, TORO/WHEEL HORSE 1-513648.
Smooth tread, 1 Piece Rim, Flat Proof. Extraordinary rubber composition.
4-1/2" centered hub with 3/4" open cage roller bearing and zerk fitting.
Includes our R8408 bearing kit. painted white
BORE: 3/4"
HUB LENGTH: 4-1/2"
TIRE SIZE: 9 X 350 X 4
TREAD: SMOOTH
TYPE: SOLID

Replaces OEM #: Exmark 634662, 1-634662
1 Piece rim, painted white
Fits Exmark Lazer Z.
Includes our R813 bearings.
BORE: 3/4"
HUB LENGTH: 5-5/8" Centered
PLY: 4
TIRE SIZE: 13 x 500 - 6
TREAD: SLICK
TYPE: TUBELESS

Replaces CARLISLE 457211
EXMARK 103-0064, 103-5189, 103-3785, 109-9126, 1634662
FERRIS 22631S, 5022631SX2
SCAG 482503, 483049, 9277
SNAPPER/KEES 5022631S
TORO/WHEEL HORSE 109-9126, 633582
WRIGHT 72460004
(Painted white).
1 piece rim, Flat Proof, Semi Pneumatic
13 x 500-6 Reliance tire mounted on a 6 x 3.25" steel wheel.
5.625" centered hub with 3/4" cups pressed in for tapered roller bearings.
Fits Exmark Lazer Z, Toro Z Master and Z100 series
NO BEARINGS INCLUDED.
If bearings are needed, order R813 bearing
or our R9944 bearing kit which includes
R813 roller bearing with race
R10064 wheel spacer
BORE: 3/4"
HUB LENGTH: 5-5/8" CENTERED
PLY: 4
TIRE SIZE: 13 X 500-6
TREAD: SLICK
TYPE: TUBELESS

Replaces OEM #: Exmark 109-9127, 109-9124, 109-9125
FITS LAZER Z 52", 60" & 72" MODELS.
With cup bearing x 6.75" sym hub length.
Includes Exmark 1-633584 bearing cup.
Similar to our R10286 except with shorter hub length.
Must be used with OEM bearing components.

Replaces OEM #: Ransomes/Bobcat 38096C, Bunton PAL 1075A, Snapper/Kees 76409, Exmark 304173, 302016.
BORE: 7/8"
HUB LENGTH: 6-1/2"
PLY: 4
TIRE SIZE: 13 x 650 - 6
TREAD: TURF
TYPE: TUBELESS

Replaces OEM #: Exmark 1-644251, 103-0069
Fits Lazer Z 52", 60" & 72" Models.
Caster Wheel with bearings.
1 piece rim, 7" Centered Hub, 3/4" bearings with zerk fitting.
PAINTED WHITE
BORE: 3/4"
HUB LENGTH: 7"
PLY: 4 PLY
TIRE SIZE: 13X650X6
TREAD: SMOOTH
TYPE: TUBELESS

Replaces OEM #: CARLISLE 457291
EXMARK 103-0065
SCAG 482504, 483050, 9278
TORO/WHEEL HORSE 633971
13 x 650-6 Reliance tire mounted on a 6 x 4.50: steel wheel.
7.25" centered hub with 3/4" cups pressed in for tapered roller bearings.
1 piece rim
Flat Proof
Semi Pneumatic
Fits Exmark Lazer Z and Toro Z Master Z280, Z253, Z255 less bearings
NO BEARINGS INCLUDED.
If bearings are needed, order our R813 bearing
or our R9944 bearing kit which includes
R813 roller bearing with race
R10064 wheel spacer

Multi-Trac 4ply Tubeless Tire
24 X 9.50 X 12
Fits Exmark Lazers.
Replaces STENS 165-512

Replaces OEM #: Exmark 634662, 1-634662, Dixie Chopper 67204
(painted white).
Fits Exmark Lazer Z & Toro Master
Includes our R813 bearings.
BORE: 3/4"
HUB LENGTH: 5-5/8"
TIRE SIZE: 13 x 500 - 6
TREAD: SLICK
TYPE: SOLID