Replaces; MTD 741-0660, 941-0660, 741-0660A
HEIGHT:  1"
ID:  3/4"
OD:  0.9450"
MATERIAL: PLASTIC

Replaces 741-0660, 941-0660
.760 ID x .941 OD x 1.0 L

Replaces MTD 741-0706, 941-0706
ID: 0.7350"
with grease fitting

Replaces MTD, Cub Cadet, Troy Bilt 741-0990, 741-0990A, 741-0990B
ID: 0.7600"
Includes grease fitting.

Size: .8 x 1.10 x 1.322

Size: .820 x 1.15 x .73

Replaces OEM#: MTD 741-0340, 741-0340P, 941-0340.
Fits 600 series models.
Also fits 1985 - 1987 MTD rider models 135-137 with single speed trans axle only.
HEIGHT: 1"
ID: 3/4"
OD: 1"

Replaces MTD 748-0867, TECUMSEH 780105A
FITS ALL 700 SERIES TRANSMISSIONS 3 & 5 SPEED OUTPUT SHAFT.
ALSO FITS 800 & 900 SERIES TRANSAXLES.
FLANGE OD: 1"
HEIGHT: 3/4"
ID: 5/8"
OD: 3/4"
OIL IMPREGNATED, BRONZE.

Replaces MTD 741-0656, 741-0656A, 941-0656
Also replaces Toro 112-0930
ID: 5/8"

Replaces; MTD 748-0110, 948-0110
FLANGE OD: 1-1/8"
HEIGHT: 5/8"
ID: 5/8"
OD: 7/8"
Bronze

This part replaces: 706-15993, 741-0401

Replaces; ARIENS 01137000, MTD 748-0169, 948-0169
Graphite Impregnated.
FLANGE OD: 1-1/8"
HEIGHT: 1-15/16"
ID: 3/4"
OD: 1"

* This part replaces:     GW-1185728     ,   GW-B1185728

.5 ID x .75 x .59 x .5

BRG:HEX FLANGE .564 ID IRON

1.00 ID x 1.246 OD

This part replaces: 741-0661, 741-0661A
Size: .75 x 1.00 x .975

* This part replaces: 706-15963

Replaces MTD 01001778, 741-0339
.75" ID x 1.00 OD x.925" L

* This part replaces: 617530, 741-04298, 741-3028, 741-3028P, 941-3028, GW-9401, IH-651815-R91
Bearing No. LM11949

Variator bearing. Replaces MTD 741-0136, 741-0404, 941-0404.
For variable speed pulley.
Fits models 600 & 659, also fits White, Master Cut & Yardman.
HEIGHT: 9/16"
ID: 9/16"
OD: 3/4"

Replaces OEM: MTD,Cub Cadet/Troy Bilt/White: 741-0563, 941-0563
REF NO: 6203-2RSNR
Fits Models: Fits most two-stage MTD,Cub Cadet/Troy Bilt/White snow throwers
ID: .666 "
OD: 1.572 "
Height: .469 "
REF. NO.: 6203-2RSNR

* This part replaces: 1185374, 741-3010, 941-3010, GW-1185374,
GW-B1185374, IH-276578-R91, IH-73002-C91, WD-900-3500, WD-C38000

Replaces (OEM): ARIENS 05408900, 05416200
BEARING NO. HMF122214P
BUNTON P0209, PL0941
CASE C12110
CUB CADET 384881-R93, 384881-R94, IH384891-R94
GRAVELY 011193, 036778, 037823, 05408900
JOHN DEERE AM118315, AM127304, AM35443
MTD 741-0141, 941-0141, IH-384881-R94
SNAPPER 7028722
TORO 110513, 251-210

Fits Models: ARIENS Most 21" walk behind mowers
BUNTON 410-350-5 caster wheels
JOHN DEERE 100 and LX series, 410-350-5 caster wheels
ID:.750"
OD:1.380"
Height:.495"
With open back race for grease penetration