Replaces (OEM): ARIENS 62010 & MTD 710-0389
Fits Ariens ST420, ST424, ST520, ST524, ST624, ST724, ST732, ST824, ST824S, ST828, ST924, ST1028, ST1228E, ST1032, ST1032E, ST1236, ST1236E.
Also fits 20", 24", 32", 36" & 40" Snowblower Attachments.
Fits MTD 195-469-000, 195-486-000 196-486-000, 190-486-000 36" Snow Thrower Attachments, 190-623-000, 190-623-000, 190-624-000, 190-624-000, 310355, 310385, 311355, 311385, 31355-9, 31385-9 and many more MTD models
Length:

1121355 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62013, 06201300
Fits Ariens Snowblower Models: ST824S, ST824, ST828, ST924, ST924E, ST928, ST1024, ST1028, ST1032, ST1228, ST1228E, ST1232, ST1232E, ST1236, ST1236E,
36" & 48" Two Stage Sno-Thro, 40" Sno-Thro Attachment.
Length: 1" OD: 3/8"

.25-20x1.00 G5YZ

SBN-TJ-100

SBB-TJ-100

Fits Worldlawn WS2690BSE 26" Snow Thrower, WS2265BSE 22" Snow Thrower and WS2475BSE 24" Snow Thrower.

New Old Discontinued Stock

Fits Tecumseh 27136A Bowl Drain Assembly and Tecumseh 632594A Carburator

121253 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62026 & MTD 1186097, 1529-025, 158907, 166759, 1712059,
1736098, 706-10611-10, 710-0260, 910-0260, 910-0260A, GW-1186097,
GW-1712059, GW-B1186097, GW-B1712059, GW-B1736098, IH-26212-R1, WM-62532
Fits Ariens ST420, ST520 20" Snowblowers, ST524, ST624, ST724, ST824, ST832, ST1032, ST8
24" & 32" Snowblowers and 24 & 32" Snowblower Attachments.
Fits MTD 22", 24", 26", 28", 45" Snowblowers and 36" Snowblower Attachments
Size: 5/16-18 x 3/4

PF-TJ-100

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"

Used with 738-04155 Shear Pin

Fits Worldlawn WS2690BSE 26" Snow Thrower, WS2265BSE 22" Snow Thrower and WS2475BSE 24" Snow Thrower.
Overall Length: 2-1/8"
OD: 5/16"

Float Dampening Spring

Fits Many Snowblower Attachments

For Craftsman, Husqvarna Snowblower Attachments

25X1.75:GR2
Use with 714-04040 Bow Tie Cotter Pin

Fits Tecumseh Carburetor numbers: 632671, 632671A, 632671B, 632671C, 632707

Fits Tecumseh Carburetor numbers: 640000, 640065, 650065A, 640176, 640221, 640285,
640289, 640326, 640328, 640329, 640330, 640333, 640337, 640353.

Fits Tecumseh Carburetor numbers: 640064, 640078A, 640091A, 640112, 640125,
640126, 640129, 640136, 640138, 640140, 640141, 640151, 640152, 640152A, 640153,
640154, 640164, 640165, 640215, 640260, 640260A, 640268, 640269, 640277, 640297, 640302, 640349.

Replaces (OEM): MTD 710-0890 (pin) & 712-0158 (nut)
Fits MTD with auger drive snowblowers.
LENGTH:  1-1/2"
THREAD SIZE:  5/16" - 18

Replaces (OEM): MTD 710-0891 (pin) & 712-0158 (nut)
Fits MTD with auger drive snowblowers.
LENGTH:  1-3/4"
THREAD SIZE:  5/16" - 18

Replaces: AMF/DYNAMARK/NOMA 301172, MURRAY 1501216, 1501216MA, M122423
Includes two 9524MA shear pins and two 3943MA spacers
Fits Murray 62 Series Dual Stage Snowblowers.
Fits Noma, John Deere, Sears, Eagle, Ayp & Husky snowblowers.
Size: .25-20X

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Comes with Lock Nut
Length: 1 9/16"
OD: 1/4"

Replaces (OEM): MTD 738-04124A
Fits Models: MTD 31A-3BAD700 - 31AS6LEG752 series 2005 & newer snowblowers
Shear Pin Length: 1-5/8"
Shear Pin OD: 1/4"
Cotter Pin Length: 1"

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"

"O" Ring, Main Nozzle Tube

Size: 5/16-18 X 4-13/64

Replaces Tecumseh part no. 650814
T-15, 10-24 x 15/16"

Replaces (OEM): MTD 731-05632, 751-10630, 951-10630
Fits Models:
CRAFTSMAN Snowthrowers
HUSKEE Snowthrowers
MTD Snowthrowers with Zongshen engines
Package of 2
Fits our 430-390 Starter Switch

For Tecumseh Carburetors

Fits Tecumseh Carburetor numbers: 632786, 632786A, 632789, 632789A, 640034, 640034A, 640072, 640072A, 640159, 640224.

5/16 - 18 x 2"

Fits Tecumseh Carburetor numbers: 632795A, 632744, 640049, 640063, 640073, 640081, 640084A, 640084B,
640103, 640118, 640147, 640275, 640276, 640280, 640282, 640299, 640299A, 640299B, 640336, 640364.

Fits Tecumseh Carburetor numbers: 632733, 632742, 632747, 640026,
640026A, 640029, 640031, 640069, 640071, 640076, 640076A, 640082,
640119, 640132, 640142, 640145, 640148, 640149, 640156, 640178,
640214, 640266, 640278, 640278A, 640288, 640307, 640314.

Fits Tecumseh Carburetor numbers: 640004, 640014.

ID: .75"
OD: 1"
FLANGE OD: 1.240"
HEIGHT: .75"

Replaces MTD 710-0890
5/16-18X1.5 LG.

Aftermarket Replaces Tecumseh 27181A Muffler
Surface rust is reason for low-low price. New-Old Stock, never installed.
Replaced by: 26762, 26819, 27181B, 27181C, 27278, 28614, 28863

Replaces OEM#: Tecumseh 651071
Fits Tecumseh Engine Models OH50, OHH50, OHV110-135.
Fits Our R9981 Electric Starter

Replaces 631524

Replaces (OEM): Honda 90102-732-010 (bolt) Honda Code 1533355 & 90114-SA0-000 (nut) Honda Code 1410182
LENGTH: 1 29/32 Inches
THREAD SIZE: M6 X 1.0
SHOULDER DIAMETER: 10mm

Replaces (OEM): HUSQVARNA 506690001, 506714001, 531002513
YAMAHA 7Y6-51647-01-00, 90185-06122-00
Size: 1/4" x 1-11/16"

Replaces (OEM): TECUMSEH 33032, 410144B, LAWN-BOY 681446
1 1/2" ID

Replaces (OEM): MTD 741-0199, 741-0490, 941-0490
FLANGE OD: 1-3/8"
HEIGHT: 3/4"
ID: 3/4"
OD: 1-1/4"
PLASTIC BUSHING

Replaces GRASSHOPPER 282575.
HEIGHT: 1-1/4"
LENGTH: 1-5/8"
WIDE DIAMETER: 3/4"

* This part replaces: 706-15718, 731-0851, 784-0851

631867 Genuine Tecumseh Carburetor Float Bowl

WASH:SPR:.401 X .870 X .063

Replaces Tecumseh 37956
Fits Tecumseh 33329D, 33329E, 33328D Starter kits and 36680 12 volts starter
Fits Tecumseh TVM, TVXL, HMSK and OHSK engines.
For 8, 10 and 12 HP Tecumseh Snow King Engines
Included in Starter Drive Kit 37052A

Replaces MTD 712-0158

Size: .44 x .8
RETURN SPRING

* This part replaces: 1185388, 716-0231, GW-1185388, GW-B1185388

Pin to 731-04913

* This part replaces 153239, 1540-031, 158063, 627372, 706-15962, 715144, 736-0287
Included in MTD wheel service kit 753-05173A

* This part replaces: 712-3087P, 7123087, 912-3087, GW-7123087

Fits Husqvarna ST224 ST227P ST230P  Snowblowers

* This part replaces: 01000629, 1513-036, 583021, 710-0857, 710-0947, 910-0642

Replaces MTD 784-5599

Replaces Murray Part No. 579493, 5797936

Replaces Murray 310169

* This part replaces: 712-0346, HG-51244, IH-19258-R1
Outside Diameter: 7-9/16"
Inside Diameter: 3/4"
Width: 2"

* This part replaces: 162636, 714-0161, HG-44143

* This part replaces: 1107385, 1540-049, 1540-086, 1540-170, 736-0326, 753-05706, GW-1107385, IH-62942-C1, YS-736-0326

This part replaces: 0070-000, 1186230, 1534-010, 1534-020, 310045, 40088, 706-10077, 706-103047-F, 706-4KHDN014, 706-500127, 706-9524, 712-0267, 712-0267P, 712-3010, 7123010, 912-0267, AM-007431, BR-30M-1000P, GW-1186230, GW-37-015 , GW-37015, GW-7123010, GW-9801, GW-B1186230, GW-B70549, GW-T70549, GW-W0305005P, IH-102634, IH-120376, JA-443106, YS-712-3010

Rope clip for recoil starters 590429, 590429A,590445, 590450, 590450A, 590457, 590519, 590623

Replaces: 706-15948, 741-0493A, 42953

Replaces (OEM): AMF/DYNAMARK/NOMA 301171, 500027, 500027MA, 578647, 578647MA, 703335
Fits Noma, John Deere, Sears, Eagle, AYP and Husky Snowblowers.

Replaces Murray Noma 54837, 577023, 577023MA
FITS NOMA SNOW THROWERS.
HEIGHT: 3-3/4"
ID: 43/64"
OD: 1-7/8"

Replaces; MTD 748-0108, 948-0108
FLANGE OD: 1"
HEIGHT: 19/32"
ID: 1/2"
OD: 3/4"

Replaces (OEM): MTD 748-0184
FLANGE OD:  1-1/8"
HEIGHT:  3/4"
ID:  5/8"
OD:  3/4"