Adapts 1" universal blades to fit MTD 090 series, MTD 030/040, MTD 312R, 313R, 315R, 816R, 818R, 462R - 479R, MTD 22" Mulcher
ID: 13/16"
OD: 1"

Replaces Scag 48100-05
FITS SCAG 32", 36", 40", 48", 52", 61" & 72" DECKS.
HEIGHT: 1/2"
ID: 3/4"
OD: 7/8"

HEIGHT:  12 mm
ID:  12 mm
OD:  17 mm

Replaces Murray 24532
ID 11/16" (17.46 mm)
OD 7/8" (22.23 mm)
Height 1-11/16" (42.86 mm)

Replaces SNAPPER/KEES 1-2617, 7012617, 7012617YP
FLANGE OD: 1-1/4"
HEIGHT: 5/8"
ID: 29/32"
OD: 31/32"
NYLON BUSHING

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.2700"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5100"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5900"

Replaces; MTD 741-0660, 941-0660, 741-0660A
HEIGHT:  1"
ID:  3/4"
OD:  0.9450"
MATERIAL: PLASTIC

HEIGHT:  12 mm
ID:  0.3130"
OD:  0.3900"

ID: 3/8" (9.53MM)
OD: 1-1/8" (28.58MM)
FITS MANY UNIVERSAL WHEELS.

Replaces; MTD 741-0225, 941-0225
King pin bushing fits 38" and 42" cut front engine riders.
HEIGHT:  5/8"
ID:  5/8"
OD:  7/8"

REPLACES AYP 121922X
HEIGHT: 25/32"
ID: 3/4"
OD: 53/64"

Replaces AYP 3366R

ID: .75"
OD: 1"
FLANGE OD: 1.240"
HEIGHT: .75"

REPLACES MURRAY 403010, GILSON 24829
FLANGE OD: 1-1/4"
HEIGHT: 3/4"
ID: 3/4"
OD: 1-1/8"
GRAPHITE IMPREGNATED METAL BUSHING

Replaces 741-0660, 941-0660
.760 ID x .941 OD x 1.0 L

Replaces OEM#: MURRAY 91334 & 491334, AYP/ROPER/SEARS 9040H
USED ON 36", 38" AND 40" FRONT ENGINE RIDERS. (PLASTIC).
HEIGHT: 1"
ID: 3/4"
OD: 1-3/8"

1/2" ID(12.70MM) X 1-1/8" OD (28.58MM).
FITS 5 X 1.50, 6 X 1.75, 7 X 1.50, 7.50 X 1.50, 8 X 1.75, 10 X 1.75.

Replaces MTD 741-0374
ITS MTD MODEL 406 REAR TINE TILLER.
LOWER CHAIN CASE BEARING ON TILLER
FLANGED OD: 1-1/2"
HEIGHT: 19/32"
ID: 1"
OD: 1-1/4"

Replaces; GRAVELY 18355
Yoke bushing on models Promaster, Pro 40, Pro 50, Pro 200, Pro 100, nylon.
FLANGE OD:  1-3/4"
HEIGHT:  3/4"
ID:  1"
OD:  1-3/8"

Fits many universal wheels
1/2" ID (12.70 mm) x 1-3/8" OD (34.93 mm)

HEIGHT:  9/16"
ID:  7/8"
OD:  1-31/64"

Replaces OEM: Jacobsen: 552187, Scag: 43278, 43592
Fits Models: Scag New style spindles
ID: 5/8 "
OD: 1 1/2 "
Thickness: 1/4 "

Replaces 175331, 532175331

Replaces AYP 120183X

Replaces Air Cap / K&S Trim all T16276, 3999.
Velka Sulky Wheel Bearing.
Bronze Bushing.
FLANGE OD: 15/16"
HEIGHT: 3/4"
ID: 1/2"
OD: 3/4"

Replaces GRASSHOPPER 282575.
HEIGHT: 1-1/4"
LENGTH: 1-5/8"
WIDE DIAMETER: 3/4"

Replaces Gravely 092027, 09202700, 92027
Fits Gravely Promaster 200 Commercial Walkbehind Mower.
Uses 2 per Wheel.
HEIGHT: 3/8"
ID: 3/4"
OD: 1-1/2"

Replaces Snapper 1-2296, 7012296, 7012296YP
Right side rear axle bearing fits Snapper 12296. for 26" thru 33" Rear Engine Riders.
FLANGE: 1/4"
HEIGHT: 1-1/2"
ID: 1-1/8"
OD: 1-5/8"

Replaces: AMF Dynamark Noma 40195
Spindle Bearing, graphite impregnated metal
FLANGE OD: 1-9/16"
HEIGHT: 3/4"
ID: 3/4"
OD: 1-3/8"

Replaces MTD 741-0706, 941-0706
ID: 0.7350"
with grease fitting

Replaces MTD, Cub Cadet, Troy Bilt 741-0990, 741-0990A, 741-0990B
ID: 0.7600"
Includes grease fitting.

Replaces 748-3055

1.25 OD

Size: .8 x 1.10 x 1.322

Replaces EXMARK 1-633580, 103-0063, 633580
FERRIS 5022631SX3, Great Dane D38065
SCAG 482622
Fits Exmark Lazer Z Unites
ID: 1-1/8"
OD: 1-3/4"
WIDE DIAMETER: 7/16"

Replaces OEM#: Toro 256-205
ID: 1"
OD: 7/8"
Length/Height: 3/4"

Size: .820 x 1.15 x .73

Replaces OEM#: MTD 741-0340, 741-0340P, 941-0340.
Fits 600 series models.
Also fits 1985 - 1987 MTD rider models 135-137 with single speed trans axle only.
HEIGHT: 1"
ID: 3/4"
OD: 1"

Replaces MTD 748-0867, TECUMSEH 780105A
FITS ALL 700 SERIES TRANSMISSIONS 3 & 5 SPEED OUTPUT SHAFT.
ALSO FITS 800 & 900 SERIES TRANSAXLES.
FLANGE OD: 1"
HEIGHT: 3/4"
ID: 5/8"
OD: 3/4"
OIL IMPREGNATED, BRONZE.

REPLACES TORO #62-5580.
USED ON TORO 68-8970 FRONT CASTER WHEEL ASSEMBLY.
ID: 3/4"
OD: 1-3/8"

Replaces OEM#: Toro 256-215
ID: 3/4"
OD: 7/8"
Length/Height: 3/4"
Flange OD: 1"

Replaces MTD 741-0656, 741-0656A, 941-0656
Also replaces Toro 112-0930
ID: 5/8"

Replaces 195227

CASTER YOKE GREASE CAP FOR 3/4" BEARINGS.
ID: 3/4"
OD: 1.7800"

REPLACES MURRAY 24615, 24615MA
FLANGE OD: 1-1/4"
HEIGHT: 3/4"
ID: 5/8"
OD: 1-1/8"
GRAPHITE IMPREGNATED METAL

Replaces (OEM): ARIENS 05503000, 55030, 5503000
AXLE BUSHING FOR ARIENS SNOWBLOWER MODELS: 910 & 924.
FLANGE OD: 1-1/4" - (31.75mm)
HEIGHT: 5/8"
ID: 7/8"
OD: 1"

Replaces OEM#: SNAPPER/KEES 1-1807, 2-6693, 7011807, 7011807YP, 7026693, TORO/WHEEL HORSE 11-0513
Sealed one side.
HEIGHT: 17/32"
ID: 3/4"
OD: 1-3/8"

Replaces; MTD 748-0110, 948-0110
FLANGE OD: 1-1/8"
HEIGHT: 5/8"
ID: 5/8"
OD: 7/8"
Bronze

1667588SM Genuine Murray Bushing
Simplicity 1668344 .248 ID x 1-3/4

Fits 38" 42" 44" 46" lawnsweepers

Replaces Murray 91903
ID: .625
OD: .875
LENGTH: 1.91

Replaces John Deere GX21994
Fits L100 series, Sabre & Scotts models.
FLANGE OD:  1"
HEIGHT:  0.8700"
ID:  0.6250"
OD:  0.9000"

Replaces AYP 9040H, 532009040, 532124959, 583670401

This part replaces: 706-15993, 741-0401

Replaces (OEM): ARIENS 05511200
Fits Models: ARIENS 901011 20" rear tine tillers, 832003 20" and 24" snow attachments
Specs:  ID:3/4"
OD:1"
Height:3/4"

50684MA Genuine Murray Gear Case Roll Bearing

Replaces; ARIENS 01137000, MTD 748-0169, 948-0169
Graphite Impregnated.
FLANGE OD: 1-1/8"
HEIGHT: 1-15/16"
ID: 3/4"
OD: 1"

Replaces OEM: Ariens 05503500, 55035

John Deere M124417

Fits all Auger Side Bushings Models 1960 to Present.

Oil impregnated ,Bronze.

HEIGHT: 5/8"

ID: 1"

OD: 1-1/8"

Replaces OEM #: Noma 49562
Bearing No. 6203ZZ.
Used in R1172 quill assembly.
Fits Noma-AMF/Dynamark 32", 36" and 39" models 3210-5100, 3612-1500, 3612-1501, 3912-0500, 3912-0501.
HEIGHT: 15/32"
ID: 21/32"
OD: 1-9/16"

Replaces OEM#: Snapper 14625, 7014625
Fits 25", 26", 28", 30" & 33" cut rear engine riders.
HEIGHT: 17/32"
ID: 3/4"
OD: 1-5/16"

* This part replaces:     GW-1185728     ,   GW-B1185728

Replaces 334514
.676 X 1.00 X .53

Roller cage bearing replaces Scag 481846. Used with our R9605 wheel assembly.
Replaces OEM #: 481846
Size: ID 21/32", OD 1-1/4", Length 15/16"

.5 ID x .75 x .59 x .5

BRG:HEX FLANGE .564 ID IRON

Replaces Murray 50304
3/4 ID x 1 OD

Replaces: ARIENS 05403900, 05435100
BEARING SC0288LU
HAHN ECLIPSE 326985
SNAPPER/KEES 1-0756, 7010756, 7010756YP
May be used with or without retaining clip.
Fits McLane and Star Clipper edgers.
Bearing No. 99502H-2RSNR.
HEIGHT: 7/16"
ID: 5/8"
OD: 1-3/8"

Bearing No. 6201RS
ID 15/32" (12 mm)
OD 1-1/4" (32 mm)
Height 25/64" (10 mm)

High Speed Bearing fits Echo, RedMax, Green Machine and Shindaiwa, Kawasaki chain saws, trimmers and blowers.
Bearing No. 6202, open both sides.
HEIGHT: 7/16"
ID: 15 mm
OD: 1-3/8"

1.00 ID x 1.246 OD

206-FF, 206FF, 206ff Both sides sealed bearing
2.44 x 1.16 x .64

.75 ID x 1.0 OD x .59

Replaces 1666855

Replaces Murray 53757
ID 1"

Open cage roller bearing with flanged bushings for our Bobcat Wheel Assembly R3239.
Bearing 38069N, Cap 38042N.
Size: ID 5/8", OD 1-13/32", Length 2-7/32"

This part replaces: 741-0661, 741-0661A
Size: .75 x 1.00 x .975

Wheel bearing replaces Honda 96150-60020-10, code 0876904.
Fits 21" commercial mowers.
Sealed 2 sides.
Bearing No. 6002-RS, 6002rs
HEIGHT: 23/64"
ID: 37/64"
OD: 1-1/4"

Bearing No. 6006RS
ID 1-3/16" (30 mm)
OD 2-3/16" (55 mm)
Height 1/2" (13 mm)

Replaces SNAPPER/KEES 1-2304, 2-8014, 7012304, 7028014, 7028014YP
Fits Snapper 21" Self-Propelled Mowers
HEIGHT: 5/16"
ID: 3/8"
OD: 1"

Replaces Ariens 05418800, King-O-Lawn 7192
Also fits Trimmer and Tru-Cut reel mowers. Trimmer No. 20202, 25202 and Tru-Cut T11275.
Bearing No. 6203Z
HEIGHT: 31/64"
ID: 21/32"
OD: 1-9/16"

Bearing No. 6203
Open bearing
WIDTH: 12"
ID: 17mm
OD: 40mm

* This part replaces: 706-15963