New Old Discontinued Stock

Fits Tecumseh 27136A Bowl Drain Assembly and Tecumseh 632594A Carburator

Float Dampening Spring

Fits Tecumseh Carburetor numbers: 632671, 632671A, 632671B, 632671C, 632707

Fits Tecumseh Carburetor numbers: 640000, 640065, 650065A, 640176, 640221, 640285,
640289, 640326, 640328, 640329, 640330, 640333, 640337, 640353.

Fits Tecumseh Carburetor numbers: 640064, 640078A, 640091A, 640112, 640125,
640126, 640129, 640136, 640138, 640140, 640141, 640151, 640152, 640152A, 640153,
640154, 640164, 640165, 640215, 640260, 640260A, 640268, 640269, 640277, 640297, 640302, 640349.

"O" Ring, Main Nozzle Tube

Replaces Tecumseh part no. 650814
T-15, 10-24 x 15/16"

For Tecumseh Carburetors

Fits Tecumseh Carburetor numbers: 632786, 632786A, 632789, 632789A, 640034, 640034A, 640072, 640072A, 640159, 640224.

5/16 - 18 x 2"

Fits Tecumseh Carburetor numbers: 632795A, 632744, 640049, 640063, 640073, 640081, 640084A, 640084B,
640103, 640118, 640147, 640275, 640276, 640280, 640282, 640299, 640299A, 640299B, 640336, 640364.

Fits Tecumseh Carburetor numbers: 632733, 632742, 632747, 640026,
640026A, 640029, 640031, 640069, 640071, 640076, 640076A, 640082,
640119, 640132, 640142, 640145, 640148, 640149, 640156, 640178,
640214, 640266, 640278, 640278A, 640288, 640307, 640314.

Fits Tecumseh Carburetor numbers: 640004, 640014.

Fits Electric Starter Tecumseh 33835, fits HH80, HH100, HH120, HH150, OH120, OH140, OH160

Aftermarket Replaces Tecumseh 27181A Muffler
Surface rust is reason for low-low price. New-Old Stock, never installed.
Replaced by: 26762, 26819, 27181B, 27181C, 27278, 28614, 28863

Replaces OEM#: Tecumseh 651071
Fits Tecumseh Engine Models OH50, OHH50, OHV110-135.
Fits Our R9981 Electric Starter

Replaces 631524

Replaces (OEM): TECUMSEH 33032, 410144B, LAWN-BOY 681446
1 1/2" ID

631867 Genuine Tecumseh Carburetor Float Bowl

Replaces Tecumseh 37956
Fits Tecumseh 33329D, 33329E, 33328D Starter kits and 36680 12 volts starter
Fits Tecumseh TVM, TVXL, HMSK and OHSK engines.
For 8, 10 and 12 HP Tecumseh Snow King Engines
Included in Starter Drive Kit 37052A

Rope clip for recoil starters 590429, 590429A,590445, 590450, 590450A, 590457, 590519, 590623

Replaces Tecumseh part # 650872

Fits Tecumseh Carburetor numbers: 632800, 632803, 632805, 632806,
640056, 640086, 640086A, 640088, 640090, 640090A, 640092, 640092A,
640093, 640094, 640095, 640096, 640097, 640097A, 640098, 640098A,
640099, 640099A, 640100, 640102, 640120, 640122, 640122A, 640122A,
640123, 640124, 640130, 640133, 640134, 640146, 640160, 640161, 640168,
640174, 640195, 640199, 640212, 640228, 640258, 640262, 640262A, 640265,
640270, 640271, 640272, 640272A, 640273, 640279, 640281, 640283, 640286,
640295, 640300, 640305, 640306, 640306A, 640308, 640309, 640310, 640311,
640312, 640313, 640339, 640340, 640341, 640342, 640344, 640345, 640346,
640350, 640356, 640358.

Replaces (OEM): ARIENS 07532000 MTD 725-1660, OEM-425-1660,  TC-35062, Tecumseh 35062
Fits Models: ARIENS ST524, ST724, ST824, ST1024, ST1028, ST1128,ST1332 and ST1336 snowthrowers
MTD 314-180-000, 314-180-088, TMO-3525203, 314-180-131, 314-181-000 snow throwers with Tecumseh engines

Fits Tecumseh Carburetor numbers: 640010, 640052, 640054, 640075,
640078, 640091, 640105, 640115, 640117, 640127.

New old stock supersedes to 37673

OD: 2"
Height: 1 5/32"
For float style carburetors without bowl drain

Replaces (OEM): TECNAMOTOR 1395.0010
TECUMSEH 631700

OD: 2"
Height: 1 5/32"
Aluminum material
For float style carburetors without bowl drain


Additional Information:  Original Tecumseh equivalent S056-090 Carburetor Bowl
Uses our S485-862 Bowl Gasket

Replaces Tecumseh 33429
Fits Tecumseh 33329D, 33329E, 33328D Starter kits and 36680 12 volts starter
Fits Tecumseh TVM, TVXL, HMSK and OHSK engines.  
For 8, 10 and 12 HP Tecumseh Snow King Engines
Included in Starter Drive Kit 37052A

Fits Tecumseh 33329D, 33329E, 33328D Starter kits and 36680 12 volts starter
Fits Tecumseh TVM, TVXL, HMSK and OHSK engines.  
For 8, 10 and 12 HP Tecumseh Snow King Engines
Included in Starter Drive Kit 37052A

Replaces (OEM): TECUMSEH 631867
FITS FLOAT STYLE CARBURETOR'S WITHOUT BOWL DRAIN.
OD: 2 13/64"
Height: 1 13/64"
Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

New-Old Stock. Discontinued.
Fits Carburetors: 631375, 631375A, 631487, 631487A, 631496, 631526, 631526A, 631532, 631559, 631572, 631572A, 631589, 631593, 631594, 631596, 631619, 631628, 631630, 631650.

Replaces (OEM): TECUMSEH 35355, 37845
Fits Models: ALL PREMIER TECUMSEH ENGINES
INSIDE DIAMETER: 1-3/4"
VENTED, WITH SPLASH GUARD.

Replaces (OEM): TECUMSEH 632019, 632019A
USED ON MOST TECUMSEH FLOAT TYPE CARBURETORS.
HEIGHT:  1/2"
ID:  1"
OD:  1-3/4"

Replaces (OEM): TECUMSEH 631021
TECUMSEH 631021A
TECUMSEH 631021B
 

Fits Models: TECUMSEH H30, V40, V50, V60, VM80, VM100, HMSK, HSSK,LEV, LH, LV, OH195, OHH, OHM120 and OVRM120
For float carburetors
Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel
U.S. Made

Replaces (OEM): TECUMSEH 36905
Fits Models: TECUMSEH LEV100, LEV115, LEV120, LV195EA, OVRM65, OVRM105 and OVRM120.
ALSO FITS TECUMSEH 4-1/2, 5 & 5-1/2 HP ENGINES.
HEIGHT: 2-27/32"
LENGTH: 2-3/4"
WIDTH: 1-3/4"

Fits our Tecumseh Replacement Carburetor R13149

Replaces:
BRIGGS & STRATTON 398101, 695740, 699334
JOHN DEERE PT10615
TECUMSEH 590574

Mitten style handle
For snowthrowers with pull start engines

Fits our Tecumseh Replacement Carburetor R13146

Fits our Tecumseh Replacement Carburetors R13148 & R13151

Fits our Tecumseh Replacement Carburetor R13147

Fits most premiere Tecumseh engines
INSIDE DIAMETER: 1-3/4"
VENTED

Replaces Tecumseh 632019
Fits most Tecumseh float-type carburetors
ID: 1"
OD: 1 3/4"
Height: 1/2"
Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Fits our Tecumseh Replacement Carburetors R13142 & R13153

Fits Electric Starter Tecumseh 33835, fits HH80, HH100, HH120, HH150, OH120, OH140, OH160

New Old Stock
90 degree elbow

Used on fuel tanks with 1-1/2" opening

For Oregon carburetors Part #'s 50-649 Replacing Tecumseh 632671C and 50-652 Replacing Tecumseh 640020B
Fits Tecumseh models VLV50, VLV55, VLV60, VLV66, VLV126, VLXL50

Replaces Tecumseh 640359
Idle Restrictor Screw

New Old Discontinued Stock

Replaces Tecumseh 32984, 34279, 32984A, 34279A
Fits Models: TECUMSEH HM80, HM90, HM100, OHV125, OVM120, OVXL120, TVM195, TVM220 and TVXL220
Fits 1/4" ID fuel line
Includes Tecumseh 35864, supersedes to 26460 hose clamps

Tecumseh New-Old stock
Replaced by: 26762, 26819, 27181B, 27181C, 27278, 28614, 28863

Replaces OEM #: Tecumseh 631839, 631584
Fits Tecumseh Models: LAV30, LAV35, LAV40, LAV50, TVS75, TVS90, TVS100, TVS105, TVS115, TVS120, ECV100, ECV120, TVXL105, OVRM40, HS50

Replaces Tecumseh 36035 Carburetor Mounting Spacer

Discontinued New-Old stock

Replaces OEM #: Tecumseh 31840
Fits Tecumseh Models: H25 thru 70, LAV25, 30, HS, HM40 thr 70, V, VH40 thur 70.
Carburetor Repair kit works Carburetor 632107A, 640084, 640084A, and 640084B

Replaces OEM #: Tecumseh 631029
Fits Tecumseh Models: H25 thru H50, LAV25 thru LAV 35, HS, HM40 thru 70, V, VH50 thru 70.

Replaces Tecumseh 730600, 740037, 740037A, 740037B, 30547A, 30548B.
Fits models LAV, V, VH, VM, TNT, TVS520-600, H, HH40-70, HM70-100, HS 638, HS 650, HS 670.

Muffler Replaces OEM #: TECUMSEH 32401
Fits Tecumseh HH40, H50, HH50, H60, HH60, H70, HH70 engine series.
Also fits Troy Bilt (6 hp).
For Snow throwers.
2-3/16" W x 5-5/8" L x 1-5/8" HT
bolt-on type.

Replaces OEM #: Tecumseh 631782
Fits Tecumseh Engine Models: V60, VM80, H80 & HM80

Replaces (OEM): TECUMSEH 631893A

Fits Models: TECUMSEH AH600, AV520, AV600, H22-H35, HS40, LAV30, LAV40, TVS600, TVS1400 and TVS1500  
 Plunger included  
 Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Replaces OEM: Tecumseh 632622, 632347
Fits TECUMSEH MODELS Tecumseh HH100, HM70-HM100, OHM120, OHSK120, OHV125, OVM120, OXVL120,
TVM170, TVM195, TVM220, TVXL195, TVXL220, VH100, HHM80 and HMSK

Fits Models: TECUMSEH H25, H30, LAV35, V40-V70, VH40-VH70 and OVRM60  
 Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Origin: U.S. Made

Replaces OEM#: Tecumseh 631978

Replaces OEM #: Tecumseh 29155, 30359, 31390, Clinton 291-55, 291-57, Jacobsen 29155, 29157
Fits Tecumseh Models: H22, H25, H30, H35, H40, H45, H50, H55, H60, H70, HH40, HH50, HH60, HH70, VH80, VH100, L series, LV series, LAV series, V series, VT series. (Walbro Equipped). H50, H60, HH40, HH50, HH60, V40, V45, V45B, V45D, V55, V55B, 0359, V55D, VH80, VH100.
Fits Clinton models: 400, A400, 404, 406, 490, 494, 498, 500, B1290, GEM series.
Fits Jacobsen models: J321, J321B, J321E, J321G, J321VA, J321VE, J321VF.
Fits Wisconsin models TRA-10D and TRA-12D (walbro model LME)

Fits Models: TECUMSEH H25-H70, HH40-HH70, HS40, HS50, HSK35, HSK60,HXL35, LAV35, LAV40, V50-V70, VH70 and TVXL105
Carburetor Repair kit works Carburetor 632107A, 640084, 640084A, and 640084B
Includes (1) of each part numbers
27110A Gasket
27554 Gasket
31839 Power Screw
630740 O-Ring
630748 Welch Plug
631021 Inlet Needle
631022 Clip
631024 Float Shaft
631027 Welch Plug
631028A Gasket
631838 Adjustment Screw

Genuine Tecumseh Breaker Points 30547A
Replaces (OEM): TECUMSEH 27948, 27948A
Fits Models: Tecumseh H70, HH60, TNT100, TVM170

Includes Tecumseh 27136A Bowl Drain Assembly
and   Tecumseh 27554 Drain Plunger Gasket

Fits many Tecumseh carburetors.

610588 Genuine Tecumseh Condenser

Fits Models: TECUMSEH HM80 spec numbers 155291M and 155337N; TXVL195 spec numbers 150217, 150218 and 150229
TORO Power Shift Snow Throwers 824 and 828 with 8hp engine  
 Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel

Origin: U.S. Made