Replaces (OEM): ARIENS 62010 & MTD 710-0389
Fits Ariens ST420, ST424, ST520, ST524, ST624, ST724, ST732, ST824, ST824S, ST828, ST924, ST1028, ST1228E, ST1032, ST1032E, ST1236, ST1236E.
Also fits 20", 24", 32", 36" & 40" Snowblower Attachments.
Fits MTD 195-469-000, 195-486-000 196-486-000, 190-486-000 36" Snow Thrower Attachments, 190-623-000, 190-623-000, 190-624-000, 190-624-000, 310355, 310385, 311355, 311385, 31355-9, 31385-9 and many more MTD models
Length:

1121355 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62013, 06201300
Fits Ariens Snowblower Models: ST824S, ST824, ST828, ST924, ST924E, ST928, ST1024, ST1028, ST1032, ST1228, ST1228E, ST1232, ST1232E, ST1236, ST1236E,
36" & 48" Two Stage Sno-Thro, 40" Sno-Thro Attachment.
Length: 1" OD: 3/8"

.25-20x1.00 G5YZ

121253 Snowblower Carriage Bolt and Nut
Replaces (OEM): ARIENS 62026 & MTD 1186097, 1529-025, 158907, 166759, 1712059,
1736098, 706-10611-10, 710-0260, 910-0260, 910-0260A, GW-1186097,
GW-1712059, GW-B1186097, GW-B1712059, GW-B1736098, IH-26212-R1, WM-62532
Fits Ariens ST420, ST520 20" Snowblowers, ST524, ST624, ST724, ST824, ST832, ST1032, ST8
24" & 32" Snowblowers and 24 & 32" Snowblower Attachments.
Fits MTD 22", 24", 26", 28", 45" Snowblowers and 36" Snowblower Attachments
Size: 5/16-18 x 3/4

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Comes with Lock Nut
Length: 1 9/16"
OD: 1/4"

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"

Replaces (OEM): ARIENS 05503000, 55030, 5503000
AXLE BUSHING FOR ARIENS SNOWBLOWER MODELS: 910 & 924.
FLANGE OD: 1-1/4" - (31.75mm)
HEIGHT: 5/8"
ID: 7/8"
OD: 1"

* This part replaces: 712-3087P, 7123087, 912-3087, GW-7123087

Replaces (OEM): ARIENS 07532000 MTD 725-1660, OEM-425-1660,  TC-35062, Tecumseh 35062
Fits Models: ARIENS ST524, ST724, ST824, ST1024, ST1028, ST1128,ST1332 and ST1336 snowthrowers
MTD 314-180-000, 314-180-088, TMO-3525203, 314-180-131, 314-181-000 snow throwers with Tecumseh engines  
 Push/pull key

Fits many Ariens and Gravely snow throwers

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"
Includes 5 Snowblower Shear Pins & Lock Nuts

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Length: 1 9/16"
OD: 1/4"
Includes 5 Shear Pins & Lock Nuts

Replaces (OEM): ARIENS 05511200
Fits Models: ARIENS 901011 20" rear tine tillers, 832003 20" and 24" snow attachments
Specs:  ID:3/4"
OD:1"
Height:3/4"

Replaces OEM: Ariens 05503500, 55035

John Deere M124417

Fits all Auger Side Bushings Models 1960 to Present.

Oil impregnated ,Bronze.

HEIGHT: 5/8"

ID: 1"

OD: 1-1/8"

Replaces:
BRIGGS & STRATTON 398101, 695740, 699334
JOHN DEERE PT10615
TECUMSEH 590574

Mitten style handle
For snowthrowers with pull start engines

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"
Includes 5 Snowblower Shear Pins & Lock Nuts

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"
Includes 5 Snowblower Shear Pins & Nuts

Replaces (OEM): ARIENS 53200500, JOHN DEERE AM123342
Length: 1 9/16"
OD: 1/4"
Includes 10 Shear Pins & Lock Nuts

Replaces OEM #: MTD 05002-0637.
Fits 1988 & 1989, 20" & 26" snowblowers models 225 & 590.
Slots are 3" apart.
Height:  3/4"
Length:  5-1/4"
Width:  3-1/8"

172-115 Ariens Nut Retainer Replaces Ariens Part 70026

Replaces (OEM): ARIENS 72106
Fits Ariens Snowblower Models 932001, 932004, 932006, 932026, 932027, 932045, 932046, 932047, 932048, 932311, 932312, 932040, 932041, 932042, 932140, 932141, 932509, 932510, 932037, 932038, 932036, 932037, 932504, 932505, 932037, 932038, 932039, 932505, 932507, 932508, 932026, 932027, 932029, 932031, 932032, 932302, 932303, 932304, 932305, 932306
Fits Ariens Tiller Models 901015, 901011, 901012, 901400, 901016, 901017, 901018, 901019, 901418
Width: 3/8" (9.53mm)
Length: 37" (939.8mm)

Replaces OEM#:ARIENS 72056,72109, BOLENS 171-9203, HOMELITE / JACOBSEN 390422, MAXIM 272240, MONO G-1080, MONTGOMERY WARD 2038-32, MTD 754-0104,754-0177,954-0104,954-0177, OTASCO 758104
Premium Belts have a protective cover made of a synthetic rubber
compound having excellent resistance to heat, oil and abrasion.
Length:32"
Width:1/2"

Replaces (OEM):
ARIENS 01016500, 02459951, 02483851, 02483859
JOHN DEERE M124413, M144012
MTD 05002, 05002-0637
DOUBLE SIDED, REVERSIBLE RUNNER FITS ALL ARIENS SNOWBLOWERS FROM 60's UNTIL PRESENT.
USED ON ARIENS MODELS 924080 WITH 24' AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & BLACK IN COLOR.
Length: 5 3/4"
Width: 3 5/8"
Height: 1 1/16"
7/16" W x 1 3/4" slot
Slots are 3" apart
Bolt slots are 3" center to center
BLACK IN COLOR.

Replaces (OEM): ARIENS 22107.
Fits all Ariens 20" augers.
Length: 19-1/4"
Width: 1-5/8"
Thread Size: 5/16"
Five 3/8" square mounting holes.
Mounting Holes approx 4.5" apart center to center.
Steel construction, painted orange

Replaces (OEM):ARIENS 2459900, 02483859, 24599, 02459900
Fits ALL ARIENS 1960 UNTIL PRESENT. FITS ARIENS MODELS: 924080 & 924082 WITH 24" AUGER.
ALSO FITS JOHN DEERE, BOLENS, MTD & SIMPLICITY
Length: 5 13/16"
Width: 3"
Height: 1"
Slot: 7/16" W x 1 3/14"
Bolt slot: 3" center to center

Replaces ARIENS: 05907100, 51001600
HOMELITE/JACOBSEN: 342449, 400120
JOHN DEERE: AM123342
STIGA: 1812-9005-01
COMES WITH LOCK NUT
THREAD SIZE: 1-3/4" X 1/4"
Includes 10 Snowblower Shear Pins & Lock Nuts

Skid Shoe for Craftsman Snowblower Attachments

Replaces OEM: ARIENS 06903200, 39032, 69032
Fits snowblower models 10954, 10962, 10965, 10969, 10970.
Negative action "F" to "S".
Has bracket for side mounting
CONDUIT LENGTH: 27-1/8"
INNER WIRE LENGTH: 29"
WIRE TRAVEL: 1-3/4"

Replaces OEM: ARIENS 01019500, 51001500, 72405900
JOHN DEERE AM122156, AM136890
SNAPPER/KEES 13865, 7091550, 91550
TORO/WHEEL HORSE 3285-11

COMES WITH LOCK NUT
THREAD SIZE: 2-1/8" X 5/16"
Includes 10 Snowblower Shear Pins & Lock Nuts

Replaces (OEM): ARIENS 72114
Fits Ariens Snowblower Models 932001, 932004, 932006, 932016, 932025, 932500, 932103, 932310, 932400, 932007, 932019, 932020, 932022, 932023, 932015, 932017, 932018
Fits Ariens Tiller Model 832004
Raw edge belt.
Width: 1/2" (12.70mm)
Length: 34-1/2" (876.30mm)

Replaces OEM Ariens 52100100
Fits new 2007 model series 921001, 921002, and 921003 that take the new black shear bolt.
1/2" wrench size.
OD:  5/16"
Includes 10 Snowblower Shear Pins & Nuts

Replaces OEM: Allis Chalmers: 536986
Ariens: 05407300, 05412000
Case: C28971
Cub Cadet: 465003-R91, 470880-R91, IH-470880-R91
Dixon: 539125515, 6011
Gravely: 011641, 05406900, 05407000, 35925
Honda: 91102-VA4-003
John Deere: JD9239, JD9296
Lesco: 050371
Noma: 35384
Ref No: DG1945B2RKACS41, P204RR6A4362
Simplicity: 108202, 108202SM, 2108202, 2108202SM, 7013313
Snapper: 1-0696, 1-3313, 5-4073, 7013313
Steiner: 55-29504AB
Stiga: 1811-0167-01
Toro: 106947, 109842, 251-351, 31-0530, 93-2559
Trail Mate: 11109
Troy-Bilt: 1185574, 1185574P, 1185828
Walker: 5265
Woods: 05412000, 16106
Yazoo: 204-060

Fits Models: Snapper 30" two-stage large frame snowthrowers and rear engine riders
Troy Bilt 14000, 30042SR, 14001, 51048SR and 14002
Yazoo YR60 and YR76

Specs:
ID: .750 "
OD: 1.780 "
Height: .610 "
Honda Code 1688217
Metal seals

Replaces (OEM): MTD 784-5038A, 784-5038B, 784-5038B-0637
Fits models 449, 450, 550, 552, 586 & 588.
Inside Diameter: 10"
Outside Diameter: 10-1/4"
Width: 3-1/2"
Slot Size: 1/2" x 3-1/4"
5 Slots 1-17/32" apart

Replaces Ariens 07200004
Also replaces Husqvarna 581832401, 501818201
Fits 924 Series Snow Throwers
LENGTH: 35-13/32"
WIDTH: 1/2"

Replaces OEM: Ariens 05405200, 05416000, Bad Boy 010-1050-00

Gravely 032050, 05416000, Husqvarna 606000186, Murray 85086, Trailmate 16427

WIDTH: 0.5600"

ID: 1"

OD: 2"

Replaces Ariens 01213200, 12132, 1213200, 02457400, 52007000
Also replaces John Deere M124285
Fits Ariens 922003, 924028, 924029, 932000
ID: 5/16"
OD: 2-1/2"
WIDTH: 13/16"

Replaces (OEM): ARIENS 54063, 05406300, JOHN DEERE AM122158, TORO 251-207, BEARING SC0493LU.
Fits Models: Ariens 54063 snowblowers
Fits LX172 John Deere.
Bearing No. SC0493LU.
HEIGHT: 1/2"
ID: 3/4"
OD: 1-3/4"

Replaces (OEM): ARIENS 32159, 378058
Fits model 2 + 2.
Length: 20"
Width: 2 5/8"  
Five 7/8" mounting holes.

Replaces (OEM): ARIENS 72131, 07213100
Raw edge belt. Fits models 924085, 924087, 924091 & 924092, 12 hp engines.
Width: 3/8" (9.53mm)
Length: 36" (914.40mm)

790-00091-0637 Genuine MTD Black Snow Thrower Slide Shoe
Replaces MTD 790-00091

Replaces OEM: ARIENS 07236200, 72362
Auger Drive Belt.
Fits 924 Series Snow Throwers
Raw Edge
Laminated, Aramid Cord Construction.
LENGTH: 37-37/64"
WIDTH: 1/2"

Replaces OEM:  ARIENS 07200007 Auger Drive Belt  
Fits 932 Series Snow Throwers  
Raw Edge 1/2" x 34.88"
Laminated, Aramid Cord Construction
LENGTH:  34-7/8"
WIDTH:  1/2"

Replaces OEM: ARIENS 07200021
Auger Drive Belt  
Fits 926 Series Snow Throwers  
Raw Edge 1/2" x 37.998"
Laminated, Aramid Cord Construction
LENGTH:  37-63/64"
WIDTH:  1/2"

Replaces OEM: ARIENS 07200020, 07200623 Auger Drive Belt.  
Fits 932 Series Snow Throwers
Raw Edge 1/2" x 37.1"
Laminated, Aramid Cord Construction
LENGTH:  37-7/64"
WIDTH:  1/2"

Replaces (OEM): ARIENS 03809400
Plastic Scraper Blade Fits Ariens SS522 SS722E S322 snowblowers.

Replaces (OEM): Ariens: 02201300, 03240700, 03248300
John Deere: AM123355, M110594
Murray: 1501435, 1501435MA
Noma: 1501435, 313883, 53830, 9005383
Stiga: 1812-9002-01
Fits ARIENS 922003, 922006-922010, 922012-922022 Snowblowers.
Fits JOHN DEERE 524D, 724D and 826D Snowblowers
Fits many Murray & Craftsman Snowblowers
Fits NOMA 21" SELF PROPELLED MOWERS
ID: 2-1/4"
OD: 4-7/16"

Replaces (OEM): ARIENS 72130, 07213000
YAZOO 1309.
Raw edge belt.
Fits models 924085, 924087, 924091 & 924092, 10 hp engines.
Width: 1/2" (12.70mm)
Length: 39" (990.60mm)

Replaces (OEM): ARIENS 07207400, 72074
Fits 6 HP Sno-Thro Models
Traction Drive
Set of 2 Matched Belts
LENGTH:  27"  (685.8 mm)
WIDTH:  1/4"  (6.35 mm)

Replaces (OEM): ARIENS 72023, 07202300.
Fits models 1975-1978 & Sno-Tro model. Drive belt 4 & 5 hp, 1969-1974 models 922018, 922019, 922020 & 922021.
Raw edge, traction drive belt.
Sold in matching pair.
Width: 1/4" (6.35 mm)
Length: 27.153" (689.69 mm)

Replaces (OEM): MTD 731-06472, 490-241-0010
Fits Most Fits AYP, Ariens, MTD, Craftsman, Murray & Toro 2 Stage Snow Throwers.
Helps protect driveways, walkways, garages and porches from snow-blower damage.
Non-abrasive material helps prevent scratches.
High-strength polymer material resists rust.
Reversible for longer life.
Includes hardware.
Designed to protect driveways, walkways, garages and porches from scratches created by traditional slide shoes.

Contains two each of MTD
731-05984, 731-05984A Polymer Slide Shoes
710-0276 Carriage Screw, 5/16-18 x 1.00
936-0159 Washer, Flat, .349 x .879
712-04063 Flange Lock Nut, 5/16-18
**These polymer shoes will work in replacement for 790-00091-0637 metal shoes