Replaces AMF/DYNAMARK/NOMA 50734
BOBCAT/RANSOM 64173-01
SNAPPER/KEES 7-6967, 7076967, 7076967YP
PIN DIAMETER:  5/16"

Replaces; BOBCAT/RANSOM 64173-02, 64173-05, EXMARK 809006, BOLENS 1719762
PIN DIAMETER:  3/16"

Replaces Bobcat 38025N.
Used on our R905 wheel assembly.
Also in our R8664 wheel bearing kit.
ID: 7/8"
OD: 1-1/2"

Retainer bushing only for Bobcat.
Used on our Bobcat R3239 wheel assembly.
OD 1-1/2" (38.10 mm), ID 5/8" (15.87 mm).
Size: ID 5/8", OD 1-1/2"

Replaces; BOBCAT/RANSOM 48053-2A, SNAPPER/KEES 2-3556, 7023556, 7023556YP
Used on Bobcat support arm 46102C.
Used on our R8181 & R6580 support arm.
Fits Snapper 23556, Pro 7.
Also fits Ferris 20822.
FLANGE OD: 1-5/8"
HEIGHT: 3/4"
ID: 1"
OD: 1-1/4"
BRONZE

CONTROL ROD LINKAGE SWIVEL FITS BOBCAT.  
5/16"

Replaces; BOBCAT/RANSOM 32345-01, 32345-01.7
Used on all variable speed new models.
Holds belt on engine pulley.

Replaces; BOBCAT/RANSOM 32345-02
Used on older model single belt variable speed mowers.
Uses 2 on engine pulley and 4 on wheel drive pulley.

Replaces OEM#: EXMARK 1323385
SNAPPER/KEES 7023735, 7102990, 7105085YP
THREADS: 5/16"-18
THREADS: FEMALE

CLAMPING KNOB 3/8" - 16 FEMALE THREADS

Bobcat/Ransomes 35010A, Bunton-Goodall PL0035, Snapper/Kees 7-6439, 7076439, 7076439YP
Bell Crank Spring fits Bobcat & Snapper/Kees.
DIAMETER: 1/2"
LENGTH OF COIL: 2-3/4"
OVERALL LENGTH: 4-7/16"
THICKNESS: 3/32"

Replaces; BOBCAT/RANSOM 64140-2, 64188-21
Clevis Pin for Traction Control Handle.
Comes complete with Cotter Pin. 3/16" DIAMETER.
OVERALL LENGTH: 1-7/8"

Replaces; BOBCAT/RANSOM 32344
Used on all 36" & 48" cut gear drive units.
Holds belt on engine pulley.

Replaces AYP Sears Craftsman 850733, 850733X004

Replaces 106933X, 106933

Replaces OEM: BOBCAT: 64173-04
ENCORE:109020
EXMARK: 1-809020
FERRIS:1520655, 5020655, 8820655
JACOBSEN: 361391
SCAG: 04066-01
TORO: 3290-384
Fits Models:  BOBCAT, ENCORE, EXMARK, FERRIS, SCAG, TORO 36", 48", 52" and 61" walk behind
Length: 1 3/4 "
OD: 2 "
7/16" OD of pin

Used on our Bobcat R3239 wheel assembly.
OD 1-21/64" (33.73 mm), ID 21/32" (16.66 mm), Length 1-7/16" (36.51 mm).

REPL BOBCAT 64123-86
For 8" caster wheel.
3/4"-10 x 5"

OD:  5/16"
THREAD SIZE:  3/8" X 18
TOTAL LENGTH:  1-1/8"

Replaces Bobcat 33050
Used on our caster yoke support arm R2218.
HEIGHT: 1-3/16"
ID: 3/4"
OD: 1"

Replaces Velke VKPIN2-2
Attaches Velke to mower bracket.
Fits all one wheel Velkes
LENGTH: 4-1/4"
OD: 1/2"

Open cage roller bearing with flanged bushings for our Bobcat Wheel Assembly R3239.
Bearing 38069N, Cap 38042N.
Size: ID 5/8", OD 1-13/32", Length 2-7/32"

Replaces OEM: ARIENS 30957
AYP/ROPER/SEARS 104445X, 109869X
BLACK ROCK 119-3501
BOBCAT/RANSOM 38383
COMMERCIAL TURF PROD 18324
EXMARK 1-513152, 513152
FERRIS 21769
GREAT DANE D38085
JOHN DEERE AM108483
SIMPLICITY/ALLIS CHA 1708207, 1708207SM
SNAPPER/KEES 27225, 7027225, 923408
Single pole, snap in mounting. Normally closed.

Replaces Velke VKPIN2-2  
Attaches Velke to mower bracket.
Fits all one wheel Velkes
DIAMETER:  1/2"
LENGTH:  4-29/32"

Fits Ariens, Briggs & Stratton 493988, Bolens, Cub Cadet, John Deere, Gilson, Gravely, Homelite, Jacobsen, MTD, Simplicity, Snapper and Toro.

Replaces OEM: Bobcat I.R.: 3974113B, 6657635
GRASSHOPPER: 100805
Honda: 15400-679-023, 15400-POH-305, 15410-MJO-004, 15410-MJO-405
HOWARD PRICE: 05364
JACOBSEN: 554011, 557759
JOHN DEERE: AM100750, AM101378, M801002, M806418, M806419
Kubota: 15241-32090, 15841-32430, 16271-32090, 16271-32098, 30401-37580, 70000-15241, 70000-74034, HH150-32094, HH150-32804,  HH152-32432, HH160-32093
SABO: 15241-32090, 15841-3243-0
SCAG: 100800
SKYJACK: 119932
TORO: 104-5167, 108-3841, 42-9030, 99-8384
YANMAR: 129150-35150, 129150-35153
Fits Models:
Bobcat I.R. Excavator: 56; 76; X220; X320 (with Kubota D722E engine); 443B (with Kubota D750B engine);453 (with Kybota D750 engine); 463 (with Kubota D722-EB engine) Skid Steer: 553; 443(with Kubota D750B engine); 543; 543B (withKubota engine)
Honda EM5000 and water cooled engines
JOHN DEERE 300, F912, 915, 925, 932, 935, 1445, 1545, 1565, 3245C Mowers, 7500, 8000 E-Cut and 8500 E-Cut Hybrid Fairway Mowers, 3215, 3215A, 3215B, 3225B, 3225C, 3235, 3235A, 3235B and 3235CFairway Mowers, 7400 and 8800 TerrainCut, 7200, 7500, 7700, 8500 and 8700 PrecisionCut, 1905 Reel Mowers, 3005, 3120, 3203, 3320, 3520, 3720 and 4005 Compact Tractors
Kubota B1550, B1700, B1750, B20, B21, B2100, B2150,B2320, B2400, B2410, B26, B2620, B2630, B2920, B4200, B5100, B5200, B6100, B6200, B7100, B7500, B7510, B7610, B8200, B9200, BX22, BX2200, BX23, BX2660, F2000, F2100, F2100E, F2260,F2560, F2560E, F2680E, F2880-F, F2880E-F, F3080, F3680, KH35, KH41, KH61, RTV1140 CPX, U25 SUPER SERIES, ZD25 F, ZD28, ZD326 P, ZD331LP and ZG327
OD: 3 "
Height: 3 1/8 "
Micron: 27
11-14 PSI pressure relief
20MM x 1.5MM THD
Anti-drain
Honda code 5038781
Note: M801002 is the shorter version of OEM

Replaces BOBCAT/RANSOM 38273, 38274
SCAG 48006-06, 48006-07, 481769, 481770
SNAPPER/KEES 22394, 22395, 7022394, 7022394YP, 7022395, 7022395YP
OPEN CAGE ROLLER BEARING IS 5/8" ID (15.86MM) X 1-3/8" OD (34.93MM), 3-1/4" LENGTH (82.55MM).
BUSHINGS ARE 5/8" ID (15.86MM) X 1-3/8" OD (34.93 MM).

Replaces STENS 295-303 & SUNBELT B1SB6891.

SPINDLE SHAFT Replaces MTD 738-0196

Replaces OEM#: AMF/DYNAMARK/NOMA 300920
BOBCAT/RANSOM 38010-2A
BUNTON-GOODALL PAL0368A, PLO368A
CUB CADET/MTD 756-04224, 756-0981A
EXMARK 1-303076, 1-323285
HOMELITE/JACOBSEN 552200
HUSQVARNA 539919078
JOHN DEERE PT8649
LESCO 050062
SNAPPER/KEES 363214, 7-6520, 7019078, 7076520
TORO/WHEEL HORSE 112-3687
TROY BILT 756-04224
ID:  3/8"
OD:  3-1/32"
WIDTH:  7/8"

Replaces Bobcat/Ransomes 2308052
Fits Bobcat/Ransome Hydro Mower Walk behind.
Also fits Bobcat/Ransome Hydro Mower XM Series - Hydro, 930300 thru 930307 and 930309 walk behinds.
LENGTH: 46"
WIDTH: 1/2"

Replaces BEARING RA100RR
BOBCAT/RANSOM 38348-01
BUNTON-GOODALL PL7323
CUB CADET 455102-R21, 586609-R92, 60069-C91, 60071-C91, IH-60071-C91, IH60071C92
DIXIE CHOPPER 30218
DIXON 539115279
DIXON INDUSTRIES 1701, 539102677, 539115279
EXMARK 1-513016
GRASSHOPPER 120081
HUSTLER 077123, 784223
JOHN DEERE 8597, JD8597
WALKER 5270
WOODS/HESSTON 60006, 70006
YAZOO 102677
Fits spindle assembly on 30", 42", 50" cut Zero Turn.
Also fits wheel hubs on Dixon Zero Turn with chain drive.
HEIGHT: 27/32"
ID: 1"
OD: 2"

Replaces; BOBCAT/RANSOM 2306019, 31005A
Variable speed. (90 degree)

Replaces Bobcat/Ransomes 38016, 38016N
"B" Section Belt, 32" and 36" decks. Raw Edge.
Length: 35.6" (904.24 mm)

Replaces OEM#: BOBCAT/RANSOMES: 2306005, 38010-1A
EXMARK: 1-403009, 1-602501
GRAVELY: 011316, 021060, 07300006, 07300039, 07314800, 21060, 7314800
SCAG: 48068
SNAPPER/KEES: 7-6500, 7-6688, 7076500, 7076500YP, 7076688
ID: 3/8"
OD: 4-5/8"
WIDTH: 11/16"

Replaces Bobcat 2721642.
Fits 36 Hydro Walkbehind wide area mowers.
Length 49"
Width 1/2" (HA)

Replaces OEM: BOBCAT: 2188179, 2720396
BUNTON: PL6006, PL7488
DIXON: 18045, 539125960, 5565, 7252
ENCORE: 423063, 423361
EXMARK: 1-513211, 1-523541, 1-633750, 109-4180, 513211
FERRIS: 1521068-1, 1719168, 22028, 5022028, 5022028X1
Honda: 25641-VE4-003, 25641-ZE4-003
HUSQVARNA: 531307394, 539102606
HYDRO GEAR: 51563
KEES: 101164, 102606
SCAG: 482770
SIMPLICITY: 1719168, 1719168YP
TORO: 1-633750, 633750, E633750, E633752
Woods: 423361
Yazoo: 101164
Fits Models:
BOBCAT 633301, 633302, 634301, 634302 For 36" to 54"decks; hydro
BUNTON ZT200
DIXON 501, 502, 5501, 5017, 5020, 5023, 5421 and 5601
EXMARK Hydro units, Viking, Explorer, Lazer Z, TurfTracer, Turf Ranger and Eaton 851 transmissions
Honda HRC7013, HRC7018 and HRC7020
Thread Size: 3/4
OD: 3 "
Height: 3 1/2 "
Micron: 10
18-22 PSI pressure relief valve
Anti-drain
Honda code 4035697
Note: Not for Dixie Chopper application

Replaces: BOBCAT/RANSOM 35008N
BUNTON-GOODALL PL4611, PLO609
EXMARK 1-303057, 1-303543, 303543
FERRIS 46363-5
HUSTLER 783555
JOHN DEERE 9467
SCAG 483303
SNAPPER/KEES 1-9125, 7-6510, 7019125, 7019125YP
Bearing No. 6305-2RS, 6305DU
HEIGHT: 21/32"
ID: 25 mm
OD: 2-7/16"

Replaces Bobcat/Ransomes 38017, 38017N
Bunton-Goodall PLO619
"B" section belt
Fits 36" & 48" deck.
Cogged.
LENGTH:  44-1/8"
WIDTH:  5/8"

BRAKE BAND FOR BOBCAT 36", 48", 54", 61" MID SIZE MOWERS.

Replaces Bobcat 38058N (roller cage bearing) & 38025N (retainers).
Fits our R905 Bobcat 38096C wheel assembly.
HEIGHT: 6-7/16"
ID: 7/8"
OD: 1-3/8"

Replaces Bobcat 4143636.
Fits 48" and 52" Walkbehind mowers.
Length 69"
Width 1/2" (HA)

Replaces PEERLESS 771846 & Bobcat / Bunton 2308134.
Pro-Gear Drive Shaft 30-1020. 6-5/8" long 9-Spline.

Replaces BOBCAT/RANSOM 128009
GRAVELY 345490, 45848
JOHN DEERE AM39489
POWER KING 03-7301
SNAPPER/KEES 1-9545, 7019545
TORO/WHEEL HORSE 37-2610, 92-6328
WALKER 6950
Fits Models: GRAVELY Tractor models Pro Master 200 and 300. JOHN DEERE PC2150, 220-285, 318, 420 and 430 lawn and garden tractors.
No. Of Positions: 2. No. Of Terminals: 5. 1/2" mounting stem. Includes hardware.

Replaces: BOBCAT/RANSOM 38213, ENCORE 363292, TORO/WHEEL HORSE 51-4270.
Fits midsize models with peerless transmissions, two 9/32" mounting holes, 2-1/2" center to center.
HEIGHT: 3/4"
ID: 5/8"
OD: 2-1/2"

Replaces PEERLESS 776468 & Ariens / Gravely 04923100.
Pro-Gear Drive Shaft 30-1019. 6-1/8" long 9-Spline.

Replaces Bobcat/Ransomes 2188128.
Fits 61"cut "O" turn models. Raw edge, Aramid fiber.
LENGTH:  63"
WIDTH:  1/2"

Repl. wheel bearing kit for our Bobcat, Grasshopper & Scag wheel assembly 8-3276. Comes with (2) 9-481 high speed 5/8" (15.88 mm) bearings, (2) 10-7779 21/32" (16.67 mm) x 1-1/8" (28.58 mm) washer and (1) 9-7262 5/8" OD (15.88 mm) x 4-1/16" (103.19 mm) bushing.

Replaces OEM: BOBCAT/RANSOM 48426, DIXIE CHOPPER 90122, JOHN DEERE CH12767, KUBOTA 70000-11081, TORO/WHEEL HORSE 27-7110
Fits Kubota models L275, 285, 295, 295DT, 305, 345, 345DT, 355SS, 2250, 2550, 2850, 2650, 2950, 3450, 3650, M4000, 4050, 4500, 4500C & 4500DT.  
ALSO FITS BOBCAT, JOHN DEERE, TORO, GRASSHOPPER & DIXIE CHOPPER..
Outside Diameter: 4"
Inside Diameter: 2-1/2"
Height: 10-1/4"

Replaces Bobcat 2722160
Fits 36 Hydro Walkbehind wide area mowers.
Length 49"
Width 1/2" (HA)

Bobcat/Ransomes 35062B, Exmark 1-303067, 303067
Output Shaft Support Bracket Bearing.
Used with our R8184 Flange.
HEIGHT: 7/8"
ID: 5/8"
OD: 1-9/16"
THICKNESS: 0.3543"

Replaces Bobcat 2721478.
Fits 36 Hydro Walkbehind wide area mowers.
Length 84-1/4"
Width 5/8" (HB)

Replaces OEM #: Bobcat 36271
ID:  2-5/16"
OD:  8-7/8"
WIDTH:  1/2"

Replaces BOBCAT/RANSOM 38030N
EXMARK 1-303499, 303499
LENGTH:  93"
WIDTH:  5/8"

Replaces Bobcat/Ransomes 2188134.
Fits 61" ZTR rider. Laminated, aramid cord construction.
Width: 5/8" (15.8mm)
Length: 101" (2565.4 mm)

Replaces Bobcat/Ransomes 2720815
Used on 48" and 52" SD Decks.
LENGTH: 95-3/4"
WIDTH: 5/8"

Replaces OEM: GRASSHOPPER: 285025
.409 ID both ends
Compressed length: 9 5/8"
Extended length: 13 1/8"
OD: .599"

Replaces OEM#: Ransom/Bobcat 2721246
FITS BOBCAT ZTR RIDER MOWERS.    
SIZE:  8 X 22  
EXTENTED LENGTH:  10.08"

Replaces Bobcat/Ransomes 2188175
Fits 52" Zero Turn
LENGTH: 97"
WIDTH: 5/8"

Replaces Bobcat/Ransomes 38523
LESCO 60561
Cogged belt for all 94, 95, 96 Bobcats. Raw edge, cogged, Aramid fiber construction. 2 rib band belt.
LENGTH:  54"
WIDTH:  1/2"

Replaces Bobcat/Ransomes 38249
LESCO 50643
LENGTH:  44-45/64"
WIDTH:  1-1/8"

Replaces Bobcat/Ransomes 128003
Width: 5/8"
Length: 132-3/4"

Replaces Bobcat/Ransomes 38212.
LENGTH:  55-31/32"
WIDTH:  1/2"

Replaces; BOBCAT/RANSOM 36411, 36526
ARM LENGTH: 5-1/2"
HOLE DIAMETER: 1/2"
LOWER HOLE DIAMETER: 17/32"
SHAFT DIAMETER: 1"
SHAFT LENGTH: 7-13/16"

Replaces Bobcat/Ransomes 2188176
Fits most 52" Bobcat mowers.
LENGTH: 121"
WIDTH: 5/8"

Replaces Bobcat 4163569.
Fits 61" Walkbehind mower.
Length 167"
Width 5/8" (HB)