PTO switch retaining ring replaces AYP 140405.
Used with our R9656 and R9657.

Plastic nut for our R9654 switch.

Plastic nut for Indak switches. Makes the switch waterproof. Use with our R10791 rubber bezel.

Rubber bezel for Indak switches.
Makes the switch waterproof.
Use with our R10792 plastic nut.

1734011-S Genuine Kohler Ignition Switch Key 17 340 11-S

STOP SWITCH-SP PLUG

4834001-S Genuine Kohler Ignition Switch Key Set of 2 48 340 01-S

Replaces 6696940
(includes one switch, 2 photos on product to show both sides.)

Supersedes to 297472S, This is new old discontinued stock.

LTC PLMHK14650123P

Universal style kill switch with a 48" lead wire.
Used on go-carts, ATV's, etc.
Mounts on 7/8" and 1" diameter frames
Includes switch, mount and lead

Replaces (OEM): HOMELITE A 63938
HOMELITE 93653
Fits Models: UNIVERSAL most chain saws and trimmers
No. Of Positions:2
No. Of Terminals:1
15/32" mounting stem
Single wire
Self-ground
1 terminal, 2 positions

PWR 2WRE/SHRD 1

Set includes 2 keys (red)
Fits LCT/Lauson 136cc 2-Stage, Single-Stage, 208cc GEN I, GEN II and Single-Stage, 254cc 2-Stage, 291cc and 414cc Snow Engines

Replaces (OEM): MTD 751-10637, 951-10637
Fits Models: MTD Snowthrowers with Zongshen engines; used on Craftsman and Huskee snowthrowers
No. Of Positions:2
No. Of Terminals:2
Uses our 430-386 Starter Key

Replaces 516586800, 533300334
Fits Poulan, Husqvarna, Craftsman machines

Toggle switch with 2, 6" wire leads.
Used on Go-Karts. Universal application.
15/32" mount.

Replaces (OEM): HUSQVARNA 503089702, 503717901
STIHL 503-08-97-021
FITS HUSQVARNA 36, 41, 50, 51, 55, 61, 266, 268, 272, 340, 345, 394, 395.

Replaced Poulan: 530029085, 530029239, 530036112, 530037692, 530038118, 530069764
Fits many Poulan Chainsaws, Trimmers and Blowers

Deluxe toggle type kill switch with a 48" lead wire.
Used on go-karts and ATV's.
Fits 3/4" & 7/8" Frames.
Comes with 7/8" Bracket.

Replaces OEM #: AYP 110721X, Husqvarna 532110721
Fits AYP riders.

Replaces OEM: Honda 36100-ZE1-015
Fits models GX100, GX120, GX140, GX160, GX240, GX270, GX340, GX390.

Fits John Deere Models: X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X729, X740, X744, X748,X749, Z225, Z245, Z425, Z445, Z465
No. Of Positions: 2
No. Of Terminals: 2
Normally open
Manufactured by Delta Systems Inc.

691959 Genuine Briggs & Stratton Indak Ignition Keys (set of 2)

Normally open
Replaces MTD 725-04807, Delta 6700-30

Replaces Excel/Hustler 601087, Snapper 721516, John Deere GY20157, Kubota K3011-62221 and Toro 110-6765.

Replaces: Ariens 03606600, Delta 6400-02, MTD 725-3223

Stop Switch used on Tanaka, Kaaz.

Deluxe toggle type kill switch with a 48" lead wire.
Used on go-karts & ATV's.
Fits 1" frame.
Comes with 1" Bracket.

Replaces OEM: ARIENS 30957
AYP/ROPER/SEARS 104445X, 109869X
BLACK ROCK 119-3501
BOBCAT/RANSOM 38383
COMMERCIAL TURF PROD 18324
EXMARK 1-513152, 513152
FERRIS 21769
GREAT DANE D38085
JOHN DEERE AM108483
SIMPLICITY/ALLIS CHA 1708207, 1708207SM
SNAPPER/KEES 27225, 7027225, 923408
Single pole, snap in mounting. Normally closed.

Replaces ARIENS: 27541
AYP/ROPER/SEARS: 160784, 532160784
GREAT DANE: D38001, D38001
HUSQVARNA: 532160784
HUSTLER: 793315
JOHN DEERE: AM-103119
KUBOTA: K1122-62282, K112262280
MTD: 725-3167, 9253167
MURRAY: 024273, 57211
SCAG: 481638, 481638
SIMPLICITY/ALLIS CHA: 1704379, 1704379SM, 1732004SM, 7015707, 7015707YP
SNAPPER/KEES: 15707, 7015707, 7015707YP
TORO: 82-2190
WRIGHT: 524-10002
Single Post, Right Angle Snap in Mounted.
Normally Open.

On/Off Switch - Rocker
Fits LCT/Lauson 136cc 2-Stage, 208cc GEN I, GEN II, 254cc 2-Stage, 291cc and 414cc Snow Engines

Replaces Grasshopper 184271. 12 Volt DC.

Replaces OEM: AYP/ROPER/SEARS: 121305X, 532121305, 532421062
BOLENS: 1761083
COMMERCIAL TURF PROD: 1001717
CUB CADET: 725-3166, 925-3166
EXMARK: 740275
GARDEN WAY: 1761083
GREAT DANE: AM104403, D28041
HUSQVARNA: 506909601, 532121305
JOHN DEERE: AM-104403
MTD: 725-3166, 9253166
MURRAY: 094159, 094159MA, 7023354YP, 94159
SCAG: 48717
SIMPLICITY/ALLIS CHA: 1714770, 7023354, 7023354YP
SNAPPER/KEES: 2-3354, 7023354, 7023354YP
TORO: 74-0275
TROY BILT: GW-1761083
WRIGHT: 524-10001
Right angle snap mounted. Normally closed.

Replaces John Deere GY20073, MTD/Cub Cadet 925-04040 & 725-04040.
Low Profile Double Pole Plunger Switch N.C./N.C. 4 Terminal.
Fits Models John Deere 102, 105, 108 115, 125, 135, 14.542GS, 145, 155C, 1642HS, 17.542HS, 1742HS, 190C, G100, G110, L100, L105,
L107, L108, L110, L111, L118, L120, L130, L1742, L2048, L2548, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145,
LA150, LA155, LT150, LT160, LT170, LT180, LT190, and LTR180.  
Cub Cadet, LT1000, SLT1500, GT1500, ZTR and Z-Force.

Replaces OEM #: Stihl 1121-430-0200.
Fits Stihl Chain Saws and Cut Quik saws models 024, 026

Replaces MTD 725-04363, Delta 6402-53
Fits MTD 700 Series Mowers

Replaces OEM: JOHN DEERE GY20094
MURRAY 094136, 094136MA, 94136
Double pole, snap in mount. Normally open/normally closed.

Replaces OEM: Husqvarna 503717901
Fits many Husqvarna and Dolmar saw models

Replaces OEM #: Briggs & Stratton 495098S
Fits Briggs & Stratton 4, 5.5 and 9 Hp Vanguard and 5 Hp Industrial Plus engines.

Replaces OEM #: AIRCAP 11604
AMF/DYNAMARK/NOMA 49907, 56922
ARIENS 01190600, 02456500, 52406900
AYP/ROPER/SEARS 135944
CUB CADET 725-3232, 925-0873
EXMARK 1-403121, 403121
FERRIS 1521842, 5021842
GREAT DANE D18090
HOMELITE/JACOBSEN GP-57823-8, JA13064-1
LAWNBOY 1-403121, 700171, 740015
LESCO 10943
MTD 925-0873
MURRAY 056419, 056419MA, 56419
SCAG 48609
SIMPLICITY/ALLIS CHA 1664804, 1664804SM
SNAPPER/KEES 17817, 28765, 7017817, 7028765, 7817
TROY BILT 1758145
Multi-application ignition switch fits single stage Simplicity & Snapper snowthrowers.
Includes key, lockwasher nut & cover.
2 TERMINALS/ 2 POSITIONS. INDAK Q431.

Replaces OEM: MTD 725-1648 & 925-1648
12 volt, 20 AMP.
Fits auto drive riding mowers & snow throwers.

Replaces OEM#: ARIENS 02754100, 03657100, 27541, 36571
AYP/ROPER/SEARS 104445X
BOBCAT/RANSOM 38382
BOLENS 174-8723
BUNTON-GOODALL PL4518
EXMARK 1-513051, 513051
FERRIS 21451
GARDEN WAY 1748723
HOWARD 09-058
HUSTLER 781211
JOHN DEERE AM104884
KUBOTA K2561-62251
MTD 725-3167, 925-3167
MURRAY 24273
SCAG 481637
SNAPPER/KEES 14847, 15707, 7014847, 7015707, 919098
TORO/WHEEL HORSE 65-7410
TROY BILT 1748723
YAZOO 1923-025, 539001125
Single Pole, Normally Open

Replaces OEM: AYP/ROPER/SEARS 109748
BOSCH 601053
EXMARK 1-643275, 98-7249
HUSTLER 026237
WALKER 6942
FITS SEVERAL AYP RIDERS.

Replaces OEM: Snapper 1-1853, 7011853
On-Off Switch for Manual Start Riders.
Single Pole.

Replaces OEM: AYP/ROPER/SEARS 153664, 161343, 176138
CUB CADET 725-3164, 725-3164AP, 925-3164A
FERRIS 22182, 5023455
MTD 725-3164A, 925-3164A
SNAPPER/KEES 1723507, 1732006, 22886, 7022886
TROY BILT 1751328
Double pole, snap in mount. Normally open/normally closed.

Replaces MTD part numbers 135814, 1830246, 725-0634, 725-0634P, GW-1830246, WD-900-2027, WD-C37514

Replaces SCAG 48609, SNAPPER 7017817, Troy Bilt GW-1758145, MTD & Troy Bilt 925-0873,
EXMARK 1-403121, SIMPLICITY 1664804SM, MURRAY 7017817YP.
Ignition Switch Magneto, 2 Positions, 2 Terminals, 5/8" mounting stem.
Includes Hardware.
On/off switch.

Universal switch for chain saws & trimmers.
Two terminal ends

Replaces OEM: Stiga 1134-4093-01
Fits models Stiga Park 2000 and Stiga Viall 2001

Replaces OEM: Snapper 72684, 7072684, 7072684YP
Ariens 03277000
Bush Hog 50047912
Scag 483472
Plastic snap in bezel. 3 position 5 terminals.

Replaces John Deere AM131549, MTD 725-04165, 925-04165, Cub Cadet 01008386, 01008386P
Fits Cub Cadet, LT1000, SLT1500, GT1500, ZTR and Z-Force.
Also Fits John Deere LT150, LT160, LT170, LT180, LT190, and LTR180.
LOW PROFILE DOUBLE POLE PLUNGER SWITCH. 4 TERMINAL. Switch  is NC/NO.

Replaces MTD/Cub Cadet 725-05013, 925-05013

Replaces OEM: AYP 401545
Used on EHP, AYP, Sears, Craftsman 2006-up riders.

Replaces John Deere AM130453
No. Of Positions: 2. * No. Of Terminals: 4. * Normally closed (N.C./N.C).
Fits Models: 115, 145, 155c, 190c, La110, La140, La150, X120, X140, La135, La165, La175, D160 100 series, D170 100 Series, X165 100 Series.
Twist lock mount.
For seats with 2-3/4" hole.

Replaces OEM: SNAPPER/KEES 1-8816, 7018816

Replaces OEM #: BLACK ROCK 119-3505
BOLENS 1768882
CASE/INGERSOLL C-46890
CUB CADET 1768882
JOHN DEERE AM119943
NATIONAL 07332
SIMPLICITY/ALLIS CHALMERS 1714771, 1714771SM
SNAPPER/KEES 29211, 292112
TWIST LOCK SEAT SWITCH FOR MULTI-APPLICATIONS.  
SINGLE POLE, TWIST LOCK MOUNT.  NORMALLY CLOSED.

Replaces (OEM): CASTLEGARDEN 19410611/0, 19410608/1, Tecumseh Peerless 786201
Transmission Neutral Start Switch

Safety, push/pull, incl. key
Fits LCT/Lauson 136cc 2-Stage, Single-Stage, 208cc GEN I, GEN II and Single-Stage, 254cc 2-Stage, 291cc and 414cc Snow Engines

Replaces OEM: GRAVELY: 034640
SCAG: 48021
SIMPLICITY: 1654634, 1654634SM
SNAPPER: 1654634
TORO: 28-4250
Fits Models: GRAVELY Pro Power, Pro Master, Pro, 2 and 4 wheeltractor units
No. Of Positions: 2
No. Of Terminals: 2
9/16" mounting stem
Normally closed

Replaces OEM#: BAD BOY: 077-8076-00
CUB CADET: 725-04228, 925-04228
DIXIE CHOPPER: 500017
HUSQVARNA: 583070001
JOHN DEERE: AM122881, AM132808, AM13359
MTD: 725-04228, 725-04228, 925-04228, 925-04659, 92504228
Fits Delta 6900-37
Snap in mounted, 3 position switch. Uses our R9667 key.

Replaces OEM #: Briggs & Stratton 495098
Fits Briggs & Stratton 4, 5.5 and 9 Hp Vanguard and 5 Hp Industrial Plus engines.

Replaces (OEM): GRAVELY 044767
JOHN DEERE AM102544, AM31995
LESCO 050102
Fits Models: GRAVELY 1232-H and 1238-H tractors, Pro walk behindsand Pro riders
JOHN DEERE 141 vacuum sweeper model PC2189; 142-162 vacuum sweeper model PC2277
Ignition Type: Magneto
No. Of Positions: 3
No. Of Terminals: 5
9/16" mounting stem

Replaces OEM: Snapper 1-2623, 7012623

Replaces (OEM): AYP/ROPER/SEARS 163968, 175442, 175566
CUB CADET 725-04227, 725-04227A, 725-04227B, 925-04227, 925-04227A, 925-04227B
HUSQVARNA 532163968, 532175566
JOHN DEERE GY20074
MTD 725-1741, 925-1741
MURRAY 94672MA, 94762

FITS ON MTD REVTEK MOWERS IN REVERSE.
7 TERMINAL, 4 POSITION SWITCH.

Replaces OEM: Murray 91846
Also fits Gravely & Noma for magneto ignition.
4 position.

Replaces Ariens 03490500, 3490500, Bad Boy 071-8061-00, Bobcat 158135-01,
Briggs & Stratton 1700636, Caterpillar: 9710402700, Dixie Chopper 400186,
Grasshopper 183870, Hustler 782177, John Deere AET10449,
Kubota K2681-62281, MTD 01003278, Toro/Wheel Horse 92-6282
Fits Models: GRASSHOPPER 120, 220, 225 and 321D; 600, 700 and 900 series.
Fits HUSTLER Models: Fastrak, Z, Mini Z, Super Mini Z and Super Z U.
Normally Open.

Replaces 980STD365402R, 917532125104, STD365402, 532125104, 365402

Replaces OEM: DELTA: 6201-342
EVERRIDE: 136574
EXMARK: 1-633673, 103-5221
GRASSHOPPER: 183925
JOHN DEERE: AM131966, TCA17834
SCAG: 481635
TORO: 1-633673, 103-5221
Fits Models: EXMARK Lazer Z
No. Of Positions: 2
No. Of Terminals: 8
Push/pull
Yellow knob
Snap mount
Markings different than OEM
Manufactured by Delta Systems Inc.

Replaces Ariens/Gravely 01588300
Fits most newer homeowner Zoom models.

Replaces Cub Cadet/MTD 725-04175, 925-04175  Delta 6201-343
Fits Cub Cadet GT1554, GT2542, GT2544, GT2550, GT2554, SLT1550, SLT1554, and Z-Force
No. Of Positions: 2
No. Of Terminals: 7
Push/pull
Yellow knob
Snap mount

Replaces OEM: ARIENS: 02913100
ENCORE: 363207
GRAVELY: 020916, 020916000
SCAG: 48021, 48231
SNAPPER: 1-6155, 7016155, 7016155YP
Stiga: 9400-0105-01
Fits Models: ARIENS EZR1540, EZR1740, EZR1742, EZR1842, EZR2048,GT10-GT18, VT1138, YT832, YT1138, YT1238
ENCORE walk behind mowers
GRAVELY G series PTO and G series Pro walk behind mowers
SCAG walk behind mowers
No. Of Positions: 2
No. Of Terminals: 2
9/16" mounting stem
Normally open

Replaces Snapper 1-1155, 7011155, 7011155YP
For Snapper rear engine riders.

Replaces oem: GRAVELY 34640, 8803700
SIMPLICITY/ALLIS CHA 1654634, 1654634SM
TORO/WHEEL HORSE 28-4250
9/16" mounting stem, normally closed, neutral safety.

Replaces OEM: AYP: 102972X, 145499, 158913
Briggs & Stratton: 490066, 493625
Exmark: 1-543070
Husqvarna: 532102972, 532145499, 532158913
Hustler: 045898
Noma: 305720
Troy-Bilt: 1754250, 1754250P
Fits Models:
AYP With Vanguard engines
Briggs & Stratton Used on Vanguard engine models
Exmark Turf Tracer
Troy Bilt lawn tractor models 13025 and 13026 13 HP gear drive tractor, 13027 and 13028 14 HP hydro suburban
Specs:
Ignition Type: Magneto
No. Of Positions: 3
No. Of Terminals: 5
5/8" mounting stem
Made by Indak

Replaces OEM: KOHLER 25-099-04-S, 2509932S
TORO/WHEEL HORSE 10-3991

Ignition Switch 4 pole.
Two Position, no spring back