REPLACES MTD 746-0613A.
TOTAL LENGTH 49-1/2".
CONDUIT:  42"
INNER WIRE:  48"
OVERALL LENGTH:  49-1/2"
WIRE TRAVEL:  2-1/4"

FITS 95'-98' MTD RIDERS,
MODELS:  135 & 136 WITH B&S ENGINES ONLY.
REPLACES MTD 746-0776.  
CONDUIT:  18-1/2"
INNER WIRE:  21-1/2"
WIRE TRAVEL:  2-1/4"

Replaces MTD 746-0843, 746-0671A

Replaces MTD 746-0970, 946-0970
LENGTH:  5-3/4"

FITS 42" DECK MOWERS. 3/8" EYELETS ON EACH END.

Replaces MTD 746-4228A, 746-04228
Total Length- 23.5"

Replaces MTD- 946-04396A, 746-04396A, 746-04396
Total Length- 21.5"

FTG:DUAL:CONDUIT CABLE

Fits MTD Troybilt Garden Cultivators

FITS MTD 1992 & LATER PUSH & SELF-PROPELLED MOWERS WITH TECUMSEH ENGINES MODELS:  081, 085, 087, 232-238, 413, 415, 423, 425, 460, 478, 500, 508, 516 & 518.  "Z" BENDS ON EACH END.  
CONDUIT LENGTH:  45"
INNER WIRE LENGTH:  47-3/8"
WIRE TRAVEL:  2-5/8"

Replaces MTD 746-0946, 946-0946
CONDUIT LENGTH:  48-1/4"
TOTAL LENGTH:  60-1/4"
WIRE LENGTH:  12-1/2"

FITS MOST MTD SIDE DISCHARGE MOWERS 1986 & PRIOR.
SNAP TO FIT HANDLE.

Replaces MTD 746-0551, 946-0551
CONDUIT LENGTH:  43"
TOTAL LENGTH:  49-1/2"
WIRE LENGTH:  5-1/2"

FITS MODEL 440, E466 AND 469 SERIES.

Replaces MTD 746-0553, 946-0553
CONDUIT LENGTH:  36-7/8"
LENGTH:  43-1/8"

FITS MTD 1991 & NEWER PUSH MOWERS WITH B&S ENGINES. MODELS 030-042, 030-042, 030-418.    
Z-BEND ON EACH END

REPLACES MTD 746-0672, 946-0672
FITS WALK BEHIND AND SELF-PROPELLED WALK BEHINDS THAT REQUIRE A 58" YELLOW CABLE.  
INNER WIRE LENGTH:  60"
SPRING LENGTH:  8-1/2"
WIRE TRAVEL:  2-1/2"

Replaces (OEM): MTD 746-0694
30-1/2" cable length.

CONDUIT LENGTH:  55"
TOTAL LENGTH:  61-1/2"
WIRE LENGTH:  5-1/2"

Replaces MTD 746-0555, 946-0555
FOR MODEL 573, 20" DECK, MODEL 370 - 379.
MODEL 445 21" REAR-DISCHARGE.
DIE CAST "Z" BEND ON EACH END.

Replaces MTD- 946-04230A, 946-04230, 746-04230A, 746-04230
Total Length- 47.5"

Replaces MTD 746-0737, 946-0737
CONDUIT LENGTH:  51"
TOTAL LENGTH:  55-1/2"
WIRE LENGTH:  5-1/2"

FOR 1994 - 97 WALK-BEHIND MODEL SERIES 070, 080, 100, 200, 400 & 500.
DIE CAST "Z" BENDS ON EACH END.

REPLACES MTD 746-0613A.
TOTAL LENGTH 49-1/2".
CONDUIT:  42"
INNER WIRE:  48"
OVERALL LENGTH:  49-1/2"
WIRE TRAVEL:  2-1/4"

Replaces MTD- 946-04229B, 746-04229B, 746-04229
Total Length- 44.9"

Replaces MTD- 946-05067, 746-05067
Total Length- 44.8"

Replaces OEM#: MTD 746-3021
FOR MTD MODELS 662 - 672 & 678.
CONDUIT LENGTH:  29"
LENGTH:  32"
WIRE SIZE:  1-1/2"

Replaces OEM# Murray 1102094MA

This part replaces: 746-0501A

Replaces MTD  746-1113, 946-1113
CONDUIT LENGTH:  37-3/8"
TOTAL LENGTH:  51"
WIRE TRAVEL:  12"

Replaces MTD 746-0957
CBL:CONT:37.25" ECONOMY

Replaces MTD 746-089, 746-0897A, 946-0897
TOTAL LENGTH: 44.7000"
TOTAL LENGTH: 135.3800 mm

* This part replaces: 746-04532, 746-04708

Replaces MTD 746-0552, 946-0552
CONDUIT LENGTH:  49"
TOTAL LENGTH:  53-1/2"
WIRE LENGTH:  5-1/2"

FITS 1985 & UP WALK-BEHIND MODEL SERIES 030, 040, 050, 060, 070, 080, 090, 100, 200, 400 & 700.
FOR SELF-PROPELLED MODEL SERIES 200, 400 * 700.
PUSH IN CLIP WITH HEAVY "Z" BEND ON EACH END.

Replaces (OEM): MTD 746-0552
Conduit Length: 50"
Inner Wire Length: 56 1/4"
Push in clips with heavy "Z" bend on each end
Replaces blue cable

Replaces MTD 946-04206A
Fits walk behind mowers
Conduit Length 76"
Inner Wire 79-1/2"
Wire Travel 3-1/4"

Replaces OEM#: MTD, Cub Cadet 746-04214, 946-04214
Fits Cub Cadet RZT50/54 Lawn Tractors
CONDUIT LENGTH:  61"
INNER WIRE:  63"
WIRE SIZE:  0.0620"
WIRE TRAVEL:  2"

* This part replaces: 746-0554
47-in Length
40.5-in Casing Length
Control Cable
Used on Walk-Behind Mowers

CBL:SELECTOR:SPD:PNL:PLASTIC

Replaces MTD 746-04438
Control Cable Snap-in 48.9" Lg.

* This part replaces: 746-04228

* This part replaces: 746-0956, 746-0956A, 746-0956B, 746-0956C, 946-0956B

Replaces MTD 746-1086, 946-1086
Fits lawn tractor with Briggs & Stratton intek engines built from 1999 through 2002. Z bend on end.
CONDUIT LENGTH: 42"
INNER WIRE: 45"

946-0912 Genuine MTD Control Cable

Replaces MTD part numbers 746-0616, 746-0616A
CBL:CHOKE:23" GRN

Replaces MTD 746-04728, 946-04728

Replaces MTD- 946-0951A, 746-0951A, 746-0951
Total Length- 15.4"

* This part replaces: 746-0556, 746-0557

Replaces MTD 746-04091

Replaces (OEM): MTD 746-0910A
CBL:CLU:41.78"

Replaces OEM#: Cub Cadet 746-04066
Fits Cub Cadet RZT 50/54 & GT1222
CONDUIT:  34"
INNER WIRE:  36-1/4"
WIRE TRAVEL:  1-1/2"

Replaces MTD 746-04299
CABLE:CONTROL:ERS:48"

CABLE-CHUTE LOCK CHUT GRBX S
* This part replaces: 746-04619, 746-04619A, 746-04619B, 946-04619, 946-04619A

Replaces MTD 746-04353A, 946-04353A, Toro 112-6137
Conduit: 25"
Inner Wire: 42-3/4"

* This part replaces: 746-0711, 746-0711A, 746-0711B, 746-0969

Replaces MTD 831-0823A
Used on riders and tillers.
Does not include throttle wire

Replaces MTD 731-05385, 746-04626

CBL:CONT:50.5 SNAP-IN FWD

Fits many models

CBL:CLU:X 41.75 DRIVE Replaces 746-04086

This part replaces: 746-04556
CABLE-THROTL/CHOKE 38.0 LG

* This part replaces: 1917032, GW-1917032
CABLE-CLUTCH CONTROL 34361

* This part replaces: 746-05105, 746-05105A, 946-05105
CABLE-CONTROL ERS 63.00 WL

* This part replaces: 746-04477

This part replaces: 746-04203

* This part replaces: 746-04026, 746-1146
73.5-in Length
66-in Casing Length
Drive Engagement Cable
Used on Walk-Behind Mowers

* This part replaces: 746-04609, 946-04609

Replaces 746-0936